Green chemistry metric to assess the use of chemicals in national and international standardized methods for determining the Total Acid Number (TAN)
DOI:
https://doi.org/10.33448/rsd-v10i5.14894Keywords:
Total Acidity Number (TAN); Standard Methods; Toxicity Index; Crude Oil; Oil.Abstract
Organic solvents are widely used in analytical determinations. Alternative methods of analysis, reduction use of toxic solvents, and use green solvents are viable alternatives to reduce environmental impact. In addition, criteria for the proper a solvent selection for a process can greatly improve the sustainability of an analysis. The objective of the research was to carry out a comparative study of solvents used in the determination total acidity number (TAN) in oil in national and international standardized methods. Colorimetric, potentiometric and thermometric methods were evaluated. A toxicity index was established according to the hazard information described in each chemical safety sheet, to assess the standardized methods. 13 standards method were evaluated: 04 national and 09 international. The results showed that the standardized methods with the highest index of environmental impact and health were potentiometric UOP 565 and thermometric ASTM D8045. The methods with the lowest indexes were the colorimetric ASTM D1093 and ABNT NBR 16430. The products classified as a health hazard were identified in 44% of the evaluated standards. We concluded that the study of international and national standardized methods showed the need to develop methods for determining Total Acidity Number in order to reduce the impact on the operator's health and the environment. The challenge of replacing solvents in standardized methods with green products should guide the development of alternative and sustainable methods for the analysis of acidity in oil.
References
ABNT NBR 14248:2009. (2009). Produtos de petróleo – Determinação do número de acidez e basicidade – Método do indicador.
ABNT NBR 14448:2013. (2013). Óleos lubrificantes, produtos de petróleo e biodiesel – Determinação do número de acidez pelo método de titulação potenciométrica.
ABNT NBR 14543:2009. (2009). Produtos de petróleo – Determinação do número de acidez por titulação colorimétrica semimicro.
ABNT NBR 14725-2:2019. (2019). Produtos químicos - Informações sobre segurança, saúde e meio ambiente. Parte 2: Sistema de classificação de perigo.
ABNT NBR 16430:2015. (2015). Compostos orgânicos – Determinação da acidez.
Alder, C. M., Hayler, J. D., Henderson, R. K., Redman, A. M., Shukla, L., Shuster, L. E., & Sneddon, H. F. (2016). Updating and further expanding GSK’s solvent sustainability guide. Green Chemistry, 18(13), 3879–3890. https://doi.org/10.1039/C6GC00611F
Alfonsi, K., Colberg, J., Dunn, P. J., Fevig, T., Jennings, S., Johnson, T. A., Kleine, H. P., Knight, C., Nagy, M. A., & Perry, D. A. (2008). Green chemistry tools to influence a medicinal chemistry and research chemistry based organisation. Green Chemistry, 10(1), 31–36. https://doi.org/10.1039/B711717E
Anastas, P. T., & Warner, J. C. (1998). Green Chemistry: Theory and Practice. Oxford University Press.
Aricetti, J. A., & Tubino, M. (2012). A green and simple visual method for the determination of the acid-number of biodiesel. Fuel, 95, 659–661. https://doi.org/10.1016/j.fuel.2011.10.058
ASTM D1093-11(2017). (2017). Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues. https://doi.org/10.1520/D1093-11R17
ASTM D664-18e2. (2018). Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration. https://doi.org/10.1520/D0664-18E02
ASTM D8045-17e1. (2017). Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration. https://doi.org/10.1520/D8045-17E01
ASTM D974-14e2. (2014). Standard Test Method for Acid and Base Number by Color-Indicator Titration. https://doi.org/10.1520/D0974-14E02
Baig, A., Paszti, M., & Ng, F. T. T. (2013). A simple and green analytical method for acid number analysis of biodiesel and biodiesel blends based on potentiometric technique. Fuel, 104, 426–432. https://doi.org/10.1016/j.fuel.2012.06.012
Bayomie, O. S., Kandeel, H., Shoeib, T., Yang, H., Youssef, N., & El-Sayed, M. M. H. (2020). Novel approach for effective removal of methylene blue dye from water using fava bean peel waste. Scientific Reports, 10(1), 1–10. https://doi.org/10.1038/s41598-020-64727-5
Byrne, F. P., Jin, S., Paggiola, G., Petchey, T. H. M., Clark, J. H., Farmer, T. J., Hunt, A. J., McElroy, C. R., & Sherwood, J. (2016). Tools and techniques for solvent selection: green solvent selection guides. Sustainable Chemical Processes, 4(1), 1–24. https://doi.org/10.1186/s40508-016-0051-z
Clarke, C. J., Tu, W.-C., Levers, O., Brohl, A., & Hallett, J. P. (2018). Green and sustainable solvents in chemical processes. Chemical Reviews, 118(2), 747–800. https://doi.org/10.1021/acs.chemrev.7b00571
DIN EN 12634:1999-02. (1999). Petroleum products and lubricants: Determination of acid number – Non-aqueous potentiometric titration method.
DIN ISO 6618:2015-07. (2015). Petroleum products and lubricants – Determination of acid or base number – Colour-indicator titration method.
Diorazio, L. J., Hose, D. R. J., & Adlington, N. K. (2016). Toward a more holistic framework for solvent selection. Organic Process Research & Development, 20(4), 760–773. https://doi.org/10.1021/acs.oprd.6b00015
Driver, M. D., & Hunter, C. A. (2020). Solvent similarity index. Physical Chemistry Chemical Physics, 22(21), 11967–11975. https://doi.org/10.1039/D0CP01570A
Fernandes, H. A., Freitas, R. R. de, Ribeiro, D. da C., Vicente, M. de A., & Santos, M. de F. P. dos. (2019). Total acidity in petroleum: A Bibliometric analysis. Research, Society and Development, 8(1), e281505. https://doi.org/10.33448/rsd-v8i1.505
GHS. (2019). Globally Harmonized System of Classification and Labelling of Chemicals (GHS) (Rev.8).
Glavič, P., & Lukman, R. (2007). Review of sustainability terms and their definitions. Journal of Cleaner Production, 15(18), 1875–1885. https://doi.org/10.1016/j.jclepro.2006.12.006
Häckl, K., & Kunz, W. (2018). Some aspects of green solvents. Comptes Rendus Chimie, 21(6), 572–580. https://doi.org/10.1016/j.crci.2018.03.010
Hassaan, M. A., El Nemr, A., & Hassaan, A. (2017). Health and environmental impacts of dyes: mini review. American Journal of Environmental Science and Engineering, 1(3), 64–67. https://doi.org/10.11648/j.ajese.20170103.11
Henderson, R. K., Jiménez-González, C., Constable, D. J. C., Alston, S. R., Inglis, G. G. A., Fisher, G., Sherwood, J., Binks, S. P., & Curzons, A. D. (2011). Expanding GSK’s solvent selection guide–embedding sustainability into solvent selection starting at medicinal chemistry. Green Chemistry, 13(4), 854–862. https://doi.org/10.1039/C0GC00918K
IP 1 - 94(2004). (2004). Determination of acidity, neutralization value - Colour indicator titration method.
Jordan, A., Stoy, P., & Sneddon, H. F. (2020). Chlorinated Solvents: Their Advantages, Disadvantages, and Alternatives in Organic and Medicinal Chemistry. Chemical Reviews. https://doi.org/10.1021/acs.chemrev.0c00709
Macián, V., Tormos, B., García-Barberá, A., & Tsolakis, A. (2021). Applying chemometric procedures for correlation the FTIR spectroscopy with the new thermometric evaluation of Total Acid Number and Total Basic Number in engine oils. Chemometrics and Intelligent Laboratory Systems, 208, 104215. https://doi.org/10.1016/j.chemolab.2020.104215
Madsen, R. B., Anastasakis, K., Biller, P., & Glasius, M. (2018). Rapid determination of water, total acid number, and phenolic content in bio-crude from hydrothermal liquefaction of biomass using FT-IR. Energy & Fuels, 32(7), 7660–7669. https://doi.org/10.1021/acs.energyfuels.8b01208
Musarurwa, H., & Tavengwa, N. T. (2020). Emerging green solvents and their applications during pesticide analysis in food and environmental samples. Talanta, 121507. https://doi.org/10.1016/j.talanta.2020.121507
Oasmaa, A., Elliott, D. C., & Korhonen, J. (2010). Acidity of biomass fast pyrolysis bio-oils. Energy & Fuels, 24(12), 6548–6554. https://doi.org/10.1021/ef100935r
Parisotto, G., Ferrao, M. F., Müller, A. L. H., Müller, E. I., Santos, M. F. P., Guimaraes, R. C. L., Dias, J. C. M., & Flores, É. M. M. (2010). Total acid number determination in residues of crude oil distillation using ATR-FTIR and variable selection by chemometric methods. Energy & Fuels, 24(10), 5474–5478. https://doi.org/10.1021/ef1002974
Park, L. K. E., Liu, J., Yiacoumi, S., Borole, A. P., & Tsouris, C. (2017). Contribution of acidic components to the total acid number (TAN) of bio-oil. Fuel, 200, 171–181. https://doi.org/10.1016/j.fuel.2017.03.022
Prat, D., Pardigon, O., Flemming, H.-W., Letestu, S., Ducandas, V., Isnard, P., Guntrum, E., Senac, T., Ruisseau, S., & Cruciani, P. (2013). Sanofi’s solvent selection guide: A step toward more sustainable processes. Organic Process Research & Development, 17(12), 1517–1525. https://doi.org/10.1021/op4002565
Prat, D., Wells, A., Hayler, J., Sneddon, H., McElroy, C. R., Abou-Shehada, S., & Dunn, P. J. (2015). CHEM21 selection guide of classical-and less classical-solvents. Green Chemistry, 18(1), 288–296. https://doi.org/10.1039/C5GC01008J
Rivera-barrera, D., Rueda-chacón, H., & V, D. M. (2020). Prediction of the total acid number (TAN) of colombian crude oils via ATR – FTIR spectroscopy and chemometric methods. Talanta, 206(May 2019), 1–11. https://doi.org/10.1016/j.talanta.2019.120186
Silva, F. M. da, Lacerda, P. S. B. de, & Jones Junior, J. (2005). Desenvolvimento sustentável e química verde. Química Nova, 28(1), 103–110. https://doi.org/10.1590/S0100-40422005000100019
Speight, J. G. (2014a). High acid crudes. Gulf Professional Publishing.
Speight, J. G. (2014b). The chemistry and technology of petroleum. CRC press.
UOP 565-05. (2005). Acid Number and Naphthenic Acids by Titration (Vol. 05).
UOP 587-92. (1992). Acid Number and Naphthenic Acids by Colorimetric Titration.
Welton, T. (2015). Solvents and sustainable chemistry. Proceedings of the Royal Society A, 471(2183), 20150502. https://doi.org/10.1098/rspa.2015.0502
Xie, W.-Q., Gong, Y.-X., & Yu, K.-X. (2017). A rapid method for the quantitative analysis of total acid number in biodiesel based on headspace GC technique. Fuel, 210, 236–240. https://doi.org/10.1016/j.fuel.2017.08.070
Zhang, J., Lu, M., Ren, F., Knothe, G., & Tu, Q. (2019). A greener alternative titration method for measuring acid values of fats, oils, and grease. Journal of the American Oil Chemists’ Society, 96(10), 1083–1091. https://doi.org/10.1002/aocs.12281
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Paulo André Prata Decoté; Luana Negris Zanelato; Amanda Puttin Vidoto; Maria de Fatima Pereira dos Santos ; Maristela de Araújo Vicente
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.