Applicability of Assistive Technology for people with spinal cord injury: An integrative review
DOI:
https://doi.org/10.33448/rsd-v10i8.15387Keywords:
Assistive technology; Spinal cord injuries; Daily activities; International classification of functioning, disability and health; Physical rehabilitation.Abstract
This study aims to present the applicability of Assistive Technology for the performance of daily activities and promotion of functional autonomy in people with spinal cord injury. This is an integrative review carried out in the following databases: Lilacs, SCiELO, Ibecs, Bdenf, and PubMed from 2015 to 2020, using the descriptors: Assistive Technology; Spinal Cord Injuries; International Classification of Functioning, Disability and Health; Daily Activities and Physical Rehabilitation. Publications available in Portuguese, Spanish and English, published in the aforementioned databases, from 2015 to 2020 were adopted as inclusion criteria. In total, 15 international publications were included in which the following categories emerged: Assistive technology in the performance of activities and Assistive Technology in the promotion of functional autonomy. From the analysis of the articles, it was possible to observe that Assistive Technology played a fundamental role in the performance of daily activities in people with spinal cord injury, as it allowed both the performance of tasks previously limited by their condition and favored the promotion of functional autonomy.
References
Angelina, C., & Soligo, S. (2016). Lei Brasileira de Inclusão da Pessoa com Deficiência - Comentada / Joyce Marquezin Setubal, Regiane Alves Costa Fayan (orgs.). Campinas: Fundação FEAC, 2016. ISBN: 978-85-69685-03-6 Pessoas com deficiência – Direitos Humanos Lei Brasileira de Inclu.
Bersch, R. (2017). Tecnologia Assistiva SNPD. 1. https://www.assistiva.com.br/Introducao_Tecnologia_Assistiva.pdf.
Bertomeu-Motos, A., Ezquerro, S., Barios, J. A., Lledó, L. D., Domingo, S., Nann, M., Martin, S., Soekadar, S. R., & Garcia-Aracil, N. (2019). User activity recognition system to improve the performance of environmental control interfaces: A pilot study with patients. Journal of NeuroEngineering and Rehabilitation, 16(1), 1–9. https://doi.org/10.1186/s12984-018-0477-5.
Burnagui, J. G., Rosa, M. P. da., & Nascimento, G. C. C. (2016). Autonomia e independência: percepção de adolescentes com deficiência visual e de seus cuidadores. Revista de Terapia Ocupacional da Universidade de São Paulo, 27(1), 21–28. http://www.revistas.usp.br/rto/article/view/104407/114556.
Cappello, L., Meyer, J. T., Galloway, K. C., Peisner, J. D., Granberry, R., Wagner, D. A., Engelhardt, S., Paganoni, S., & Walsh, C. J. (2018). Assisting hand function after spinal cord injury with a fabric-based soft robotic glove. Journal of NeuroEngineering and Rehabilitation, 15(1), 1–10. https://doi.org/10.1186/s12984-018-0391-x.
Civil, C. (2019). Presidência da República. 1–13.
Costa, C. R. da., Ferreira, F. M. R. M., Bortolus, M. V., & Carvalho, M. G. R. (2015). Dispositivos de tecnologia assistiva: fatores relacionados ao abandono. Cadernos de Terapia Ocupacional da UFSCar, 23(3), 611–624. https://doi.org/10.4322/0104-4931.ctoar0544.
Cruz, D. M. C. da., & Ioshimoto, M. T. A. (2010). Tecnologia Assistiva Para As Atividades De Vida Diária Na Tetraplegia Completa C6 Pós-Lesão Medular. 177–190.
Decreto no 5296 de 02 de dezembro de 2004, 2004. http://www.planalto.gov.br/ccivil_03/_ato2004-2006/2004/decreto/d5296.htm.
Degerli, Y. I., Dogu, F., & Oksuz, C. (2020). Manufacturing an Assistive Device With 3D Printing Technology- a Case Report. Assistive Technology, 00(00), 1–5. https://doi.org/10.1080/10400435.2020.1791278.
Etingen, B., Martinez, R. N., Vallette, M. A., Dendinger, R., Bidassie, B., Miskevics, S., Khan, H. T., Cozart, H. T., Locatelli, S. M., & Weaver, F. M. (2018). Patient perceptions of environmental control units: experiences of Veterans with spinal cord injuries and disorders receiving inpatient VA healthcare. Disability and Rehabilitation: Assistive Technology, 13(4), 325–332. https://doi.org/10.1080/17483107.2017.1312574.
Folan, A., Barclay, L., Cooper, C., & Robinson, M. (2015). Exploring the experience of clients with tetraplegia utilizing assistive technology for computer access. Disability and Rehabilitation: Assistive Technology, 10(1), 46–52. https://doi.org/10.3109/17483107.2013.836686.
Friesen, E. L. (2019). An introduction to the electronic Mobile shower commode ASessment Tool (eMAST). https://www.researchgate.net/publication/331260722_An_introduction_to_the_electronic_Mobile_shower_commode_ASessment_Tool_eMAST.
Friesen, E. L., Theodoros, D., & Russell, T. G. (2015). Use, performance and features of mobile shower commodes: Perspectives of adults with spinal cord injury and expert clinicians. Disability and Rehabilitation: Assistive Technology, 10(1), 38–45. https://doi.org/10.3109/17483107.2013.832413.
Galvão, T. A. F. (2009). Tecnologia assistiva para uma escola inclusiva: apropriação, demanda e perspectivas. 346. https://repositorio.ufba.br/ri/handle/ri/10563.
Goldau, F. F., Shastha, T. K., Kyrarini, M., & Graser, A. (2019). Autonomous multi-sensory robotic assistant for a drinking task. IEEE International Conference on Rehabilitation Robotics, 2019-June, 210–216. https://doi.org/10.1109/ICORR.2019.8779521.
Hooper, B., Verdonck, M., Amsters, D., Myburg, M., & Allan, E. (2018). Smart-device environmental control systems: experiences of people with cervical spinal cord injuries. 13(8), 724–730. https://doi.org/10.1080/17483107.2017.136959.
Khalid, U., Conti, G. E., Erlandson, R. F., Ellis, R. D., Brown, V., & Pandya, A. K. (2015). Voice-activated lightweight reacher to assist with upper extremity movement limitations: A case study. Assistive Technology, 27(2), 112–120. https://doi.org/10.1080/10400435.2014.970676.
Kim, B., In, H., Lee, D. Y., & Cho, K. J. (2017). Development and assessment of a hand assist device: GRIPIT. Journal of NeuroEngineering and Rehabilitation, 14(1), 1–14. https://doi.org/10.1186/s12984-017-0223-4.
Meneses, K. V. P. de., Rocha, D. N., Corrêa, M. F. S., & Pinotti, M. (2008). Testes preliminares de um protótipo de órtese funcional para mão. Revista de Terapia Ocupacional Da Universidade de São Paulo, 19(3), 193–201. https://doi.org/10.11606/issn.2238-6149.v19i3p193-201.
Meneses, K., Rocha, D., Júnior, F., Sono, T., Oliveira, A., & Pinotti, M. (2012). Aplicação de uma órtese funcional para mão em indivíduos com lesão do plexo braquial* Application of a functional hand orthosis in individuals with brachial plexus injuries. 34–43.
Ministério da Saúde. Secretaria de Atenção à Saúde. Departamento de Ações Programáticas Estratégicas. (2015). Diretrizes de Atenção à Pessoa com Lesão Medular Diretrizes de Atenção.
Osuagwu, B. A. C., Timms, S., Peachment, R., Dowie, S., Thrussell, H., Cross, S., Shirley, R., Segura-Fragoso, A., & Taylor, J. (2020). Home-based rehabilitation using a soft robotic hand glove device leads to improvement in hand function in people with chronic spinal cord injury:a pilot study. Journal of NeuroEngineering and Rehabilitation, 17(1), 1–15. https://doi.org/10.1186/s12984-020-00660-y.
Rashid, Z., Pous, R., & Norrie, C. S. (2017). An independent shopping experience for wheelchair users through augmented reality and RFID. Assistive Technology, 31(1), 9–18. https://doi.org/10.1080/10400435.2017.1329240.
Riberto, M., Miyazaki, M. H., Jucá, S. S. H., Sakamoto, H., Pinto, P. P. N., & Battistella, L. R. (2004). Validation of the Brazilian version of Functional Independence Measure. Acta Fisiátrica, 11(2), 3–7. https://doi.org/10.5935/0104-7795.20040003.
Rocha, E. F., & Castiglioni, M. D. C. (2005). Reflexões sobre recursos tecnológicos: ajudas técnicas, tecnologia assistiva, tecnologia de assistência e tecnologia de apoio. Revista de Terapia Ocupacional Da Universidade de São Paulo, 16(3), 97–104. https://doi.org/10.11606/issn.2238-6149.v16i3p97-104.
Seyi, A., Aston, N., & Helen, B. (2016). Locally manufactured wheelchairs in Tanzania – Are users satisfied? African Health Sciences, 16(4), 1174–1181. https://doi.org/10.4314/ahs.v16i4.37.
Soares, C. B., Hoga, L. A. K., Peduzzi, M., Sangaleti, C., Yonekura, T., & Silva, D. R. A. D. (2014). Revisão integrativa: conceitos e métodos utilizados na enfermagem. Revista Da Escola de Enfermagem Da U S P., 48(2), 335–345. https://doi.org/10.1590/S0080-623420140000200020.
World Health Organization. (2011). Summary World Report On Disability. World Health, 1–24. http://www.larchetoronto.org/wordpress/wp-content/uploads/2012/01/launch-of-World-Report-on-Disability-Jan-27-121.pdf.
Yeo, S. S., & Kwon, J. W. (2018). Wheelchair Skills Training for Functional Activity in Adults with Cervical Spinal Cord Injury. International Journal of Sports Medicine, 39(12), 924–928. https://doi.org/10.1055/a-0635-0941.
Yoo, H. J., Lee, S., Kim, J., Park, C., & Lee, B. (2019). Development of 3D-printed myoelectric hand orthosis for patients with spinal cord injury. Journal of NeuroEngineering and Rehabilitation, 16(1), 1–14. https://doi.org/10.1186/s12984-019-0633-6.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Hilmara Ferreira da Silva; Juliane Ferreira da Silva; Vanessa Vianna Cruz; Nébia Maria Almeida de Figueiredo; Aline Coutinho Sento Sé; Wiliam César Alves Machado
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
