Composite repair using universal adhesive improves bonding stability
DOI:
https://doi.org/10.33448/rsd-v10i8.17518Keywords:
Dental restoration repair; Dentin-bonding agents; Composite resins.Abstract
O reparo em resinas compostas é um procedimento que tem demonstrado bons resultados, quando bem idicado. Em casos de fratura ou manchamento, a remoção total da restauração pode ocasionar desgastes desnecessários no elemento dental. Este estudo avaliou o efeito do envelhecimento na resistência de união de um adesivo universal contendo silano e/ou aplicação de silano separadamente para reparos em resinas compostas. Os blocos de resina composta foram termociclados e divididos de acordo com o protocolo de adesão (n = 10): silano (Sil), adesivo convencional (AC), adesivo universal (AU), Sil + AC (SilAC) e Sil + AU (SilAU). Camadas de resina composta foram adicionadas e os blocos seccionados e divididos em 2 subgrupos: 24h e 4 meses de armazenamento em água. O teste de microtração foi realizado e os dados foram analisados estatisticamente (α = 0,05). Após 4 meses de envelhecimento, o SilAC e o SilAC mostraram uma redução significativa da resistência de união, enquanto que para o AU a união permaneceu estável.
References
M ESPE. Scotchbond Universal Adhesive technical product profile. Retrieved online http://multimedia.3m.com/mws/media/754751O/scotchbond-universal-adhesive-technical-product-profile.
Acharya, G. S., & Manjunath, M. (2012) The effect of surface treatments and bonding regimens on microtensile bond strengths of repaired composite: An in vitro study. J Conserv Dent, 15(4):383-387.
Ahmadizenouz, G., Esmaeili, B., Taghvaei, A., Jamali, Z., Jafari, T., Amiri Daneshvar, F., & Khafri, S. (2016) .Effect of different surface treatments on the shear bond strength of nanofilled composite repairs. J Dent Res Dent Clin Dent Prospects., 10(1):9-16.
Çakir, N. N., Demirbuga, S., Balkaya, H., & Karadaş, M. (2018) Bonding performance of universal adhesives on composite repairs, with or without silane application. J Conserv Dent, 21(3):263-268.
Chen, K. K., Chen, J. H., Wu, J. H., & Du, J. K. (2021) Influence of commercial adhesive with/without silane on the bond strength of resin-based composite repaired within twenty-four hours. J Dent Sci, 16(3):877-884.
Cho, B. H. & Dickens, S. H. (2004) Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater, 20(2):107-15.
da Costa, J. B., Frazier, K., Duong, M. L., Khajotia, S., Kumar, P., & Urquhart, O. (2021) Council on Scientific Affairs. Defective restoration repair or replacement: An American Dental Association Clinical Evaluators Panel survey. J Am Dent Assoc, 152(4):329-330.e2.
de Rosatto, C. M., Roscoe, M. G., Novais, V. R., Menezes, M. S., & Soares, C. J. (2014) Effect of silane type and air-drying temperature on bonding fiber post to composite core and resin cement. Braz Dent J, 25(3):217-224.
Elias, S. T., Santos, A. F., Garcia, F.C., Pereira, P. N., Hilgert, L. A., Fonseca-Bazzo, Y. M., Guerra, E. N., & Ribeiro, A. P. (2015) Cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time. Braz Dent J, 26(2):160-168.
Eliasson, S.T., Tibballs, J., & Dahl, J. E. (2014). Effect of different surface treatments and adhesives on repair bond strength of resin composites after one and 12 months of storage using an improved microtensile test method. Oper Dent, 9(5):E206-E216.
Fornazari, I.A., Wille, I., Meda, E.M., Brum, R. T., & Souza, E. M. (2017) Effect of Surface Treatment, Silane, and Universal Adhesive on Microshear Bond Strength of Nanofilled Composite Repairs. Oper Dent, 42(4):367-374.
Gutierrez, N.C., Moecke, S.E., Caneppele, T. M., Perote, L. C., Batista, G. R., Huhtalla, M. F., & Torres, C. R. (2019) Bond Strength of Composite Resin Restoration Repair: Influence of Silane and Adhesive Systems. J Contemp Dent Pract, 20(8):880-886.
Halvorson, R. H., Erickson, R. L., & Davidson, C. L. (2003) The effect of filler and silane content on conversion of resin-based composite. Dent Mater, 19(4):327-333.
Imbery, T. A., Gray, T,, DeLatour, F., Boxx, C., Best, A. M., & Moon, P. C. (2014) Evaluation of flexural, diametral tensile, and shear bond strength of composite repairs. Oper Dent, 39(6):E250-E260.
Konno, A.N., Sinhoreti, M. A., Consani, S., Correr Sobrinho, L., & Consani, R. L. (2003) Storage effect on the shear bond strength of adhesive systems. Braz Dent J, 14(1):42-47.
Lima, A. F., Ferreira, S. F., Catelan, A., Palialol, A. R., Gonçalves, L. S., Aguiar, F. H., & Marchi, G. M. (2014) The effect of surface treatment and bonding procedures on the bond strength of silorane composite repairs. Acta Odontol Scand, 72(1):71-75.
Loomans, B. A., Vivan Cardoso, M., Roeters, F.J., Opdam, N.J., De Munck, J., Huysmans, M.C., & Van Meerbeek, B. (2011) Is there one optimal repair technique for all composites?. Dent Mater, 27:701-709.
Lung, C. Y., & Matinlinna, J. P. (2012) Aspects of silane coupling agents and surface conditioning in dentistry: an overview. Dent Mater, 28(5):467-477.
Maneenut, C., Sakoolnamarka, R., & Tyas, M. J. (2011) The repair potential of resin composite materials. Dent Mater, 27(2):e20-E27.
Mendes, L.T., Loomans, B. A. C., Opdam, N. J. M., Silva, C. L. D., Casagrande, L., & Lenzi, T. L. (2020) Silane Coupling Agents are Beneficial for Resin Composite Repair: A Systematic Review and Meta-Analysis of In Vitro Studies. J Adhes Dent, 22(5):443-453.
Staxrud, F.; Dahl, J. E. (2015). Silanising agents promote resin-composite repair. Int Dent J., 65(6):311-315.
Tsutsumi M. S. C., de Souza F. T., Batista V. E. S., Matuda L. S. A., dos Santos P. H. & Catelan A. (2021) Bond strength repair of a bulk-fill composite using different adhesive systems and resin composites. Research, Society and Development, 10(5):3141051495.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Heitor Ceolin Araujo; Andressa Restani; Eliane Cristina Gava Pizi; Anderson Catelan; Rosana Leal do Prado; Graziela Avila Prado Galhano
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
