Oral rehabilitation in ceramic crown using digital flow: case report
DOI:
https://doi.org/10.33448/rsd-v10i14.22212Keywords:
Fixed partial denture; Dental porcelain; Workflow.Abstract
Within clinical practice, digital dentistry is able to progressively dominate the adversities related to conventional molding techniques, as the mechanisms with IOS (intraoral scanner) provide more comfort to the patient, optimize work time and offer a forecast of the treatment. Thus, the selection of the type of ceramic will influence the conservation of the restoration. The aim of this study was to report a clinical case of rehabilitation of an upper molar with the contribution of digital flow, to obtain a metal-free total crown. Promptly after the clinical-radiographic opinion, a treatment was chosen for the patient, which consisted of exchanging a fractured crown made of injected lithium disilicate for a reamed one. The expulsive preparation was carried out with the 2067 drills to prepare the external straight angles and the internal ones with the 4138 to make them rounded. As for cementation, the best option for this case was the dual polymerization self-adhesive resin cement. Through the execution of this work, the patient's dental rehabilitation became feasible, capable of encouraging and assisting in future studies on fixed prostheses, performed in the digital workflow through the scanner, with simple handling and defined scanning.
References
Ahid, B. D. A. R. N., Abreu-Pereira, C. A., Ahid, V. P., Ferro, A. C., Pereira, A. L. G., Casanovas, R. C., & Ahid, F. J. M. (2021). O sistema CEREC na confecção de prótese parcial fixa em cerâmica: Relato de caso clínico. Research, Society and Development, 10(6), e54310616142-e54310616142.
American Dental Association (1977). Council on Dental Materials Devices. Specification n.19 for non-aqueous, elastomeric dental impression materials. Journal American Dental Association, 94(4):733-41.
Bernardes, S. R., Matias, T. S. I., & Thomé, G. (2012). Tecnologia CAD/CAM aplicada a prótese dentária e sobre implantes. Jornal ILAPEO, 6(1), 8-13.
Brecker, S. C. (1956). A porcelana transformada em ouro - um novo meio em prótese dentária. The Journal of Prosthetic Dentistry, 6(6): 801-810.
Brunetto, J. L. (2020). Effect on the bond strength of different dental ceramics surface treatments. Faculdade de Odontologia da Universidade Estadual Paulista: UNESP, Araçatuba.
Magalhães Filho, T. R. (2019). Análise comparativa das propriedades mecânicas de cimentos resinosos convencionais e autoadesivos. Revista Científica da UNIFENAS-ISSN: 2596-3481, 1(2).
Canullo, L, Di Domenico, A, Marinotti, F, Menini, M, & Pesce, P (2018). Soft tissue contour impression with analogic or digital workflow: a case report. International journal of environmental research and public health, 15(12), 2623.
Cassiano, C. K. P., Dias, S. C., Rigolin, F., Oliveira Mussel, R. L., Santos, L. M. & Tiossi, R. (2021). Shear bond strength between resin cement and lithium disilicate ceramics after intrinsic staining. Research, Society and Development, 10(3), e6410313035-e6410313035.
Correia, A. R. M., Fernandes, J. C. A. S., Cardoso, J. A. P., & Silva, C. F. C. L. (2013). CAD-CAM: a informática a serviço da prótese fixa. Revista de Odontologia da UNESP, 35(2), 183-189.
Denry, I. L. (1996). Recent advances in ceramics for dentistry. Critical Reviews in Oral Biology & Medicine, 7(2), 134-143.
Idris, B., Houston, F., & Claffey, N. (1995). Comparison of the dimensional accuracy of one-and two-step techniques with the use of putty/wash addition silicone impression materials. The Journal of prosthetic dentistry, 74(5), 535-541.
Johnson, G. H., & Craig, R. G. (1986). Accuracy of addition silicones as a function of technique. The Journal of prosthetic dentistry, 55(2), 197-203.
Maia, D. C., Alves, E. C., Melo Rolim, S. M. T., Silva, A. K. P., Melo, F. J. C., & Fernandes, M. L. B. (2021). A inovação tecnológica atrelada ao estímulo sustentável: uma análise no Centro Tecnológico do Porto Digital em Pernambuco-Brasil. Research, Society and Development, 10(12), e104101219666-e104101219666.
Marques, J. N., Dantas, M. C. C., Nascimento, D., Simão, R., & Prado, M. (2016). Efeito do NaOCl na resistência de união de pinos de fibra cimentados à dentina utilizando um cimento convencional e um autoadesivo. Revista Brasileira de Odontologia, 73(4), 283.
Mezzomo, E., Suzuki, R. M. (2009).Reabilitaҫão Oral Contemporânea. Livraria Santos Editora.
Mesquita, V. T., Rodrigues, R. A., Dias, A. M., Machado, C. A., & Batista, A. U. D. (2021). Materiais e técnicas de moldagem em prótese fixa. Saber Científico (1982-792X), 1(1), 45-54.
Moreira, R. H., Manna, M. P. N. C., Lima Medeiros, Y., Faria, L. V., Neves, V. D. A. M., Pucetti, M. G., & Pazinatto, R. B. (2021). Fluxo digital no planejamento e execução de reabilitações orais estéticas: Uma revisão de literatura. Research, Society and Development, 10(6), e54810616165-e54810616165.
Namoratto, L. R., Souza Ferreira, R., Lacerda, R. A. V., Sampaio Filho, H. R., & Ritto, F. P. (2014). Cimentação em cerâmicas: evolução dos procedimentos convencionais e adesivos. Revista Brasileira de Odontologia, 70(2), 142.
Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia da Pesquisa Científica-Licenciatura em Computação. UFSM.
Schestatsky, R., Zucuni, C. P., Venturini, A. B., Lima Burgo, T. A., Bacchi, A., Valandro, L. F., & Pereira, G. K. R. (2019). CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: fatigue performance and ceramic surface characteristics. Journal of the mechanical behavior of biomedical materials, 94, 144-154.
Souza, R. O. A., Özcan, M., & Miyashita, E. (2012). Zircônia na Odontologia: vantagens e possíveis limitações. In: Mendes, WB, Miyashita, E, Oliveira, GG. Reabilitação oral: previsibilidade e longevidade. São Paulo: Napoleão, 2012. p. 513-63.
Zarone, F., Fabbri, G., & Dellificorelli, G (2019). “Clinical evaluation of 860 anterior and posterior lithium disilicate restorations: retrospective study with a mean follow-up of 3 years and a maximum observational period of 6 years”. The International Journal of Periodontics & Restorative Dentistry, 34(2): 165–177.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Layana Oliveira de Abreu; Clara Berthyne Pinheiro Romão; Jackeline Vieira Alves; Karyne Neyva Braga Pinheiro; Gustavo Medeiros Toscano da Silva; Marcos Alexandre Casimiro de Oliveira; Raulison Vieira de Sousa; Rosalya Maria Coura; Natália Vieira Soares Gadelha de Oliveira; José Klidenberg de Oliveira Júnior
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
