Analysis of the integration of industry 4.0 and circular economy to consolidate the concept of remanufacturing 4.0: a bibliometric study
DOI:
https://doi.org/10.33448/rsd-v11i7.29687Keywords:
Industry 4.0; Remanufacturing; Remanufacturing 4.0; Circular economy.Abstract
Industry 4.0 and Circular Economy are emerging topics that have been gaining deep interest in the academic world. These are two independent fields of research, which when researched together can be considered interconnected, contributing to facilitate the understanding that industry 4.0 and circular economy can be worked together. The study presented in this article describes the evolution of scientific publications and traces the bibliometric profile found in the literature. The research method was the bibliometric study in order to recognize which are the most latent actions and strategies in the study through the integration of keywords that relate remanufacturing with industry 4.0 and/or circular economy. The VOSviewer software was used for grouping and hierarchical grouping of keywords and areas. The results of this article show the increase in the number of publications that interrelate Remanufacturing and Industry 4.0, between 2019 and 2021 there was a growth of 66.6% and that the main tools of Industry 4.0 in building a Remanufacturing 4.0 are: Internet of Things, Big Data and Additive Manufacturing.
References
Bakshi, B. R. & Fiksel, J. (2003). The Quest for Sustainability: Challenges for process systems engineering. AlChe Journal 49(6).
Bressanelli, G. et al. (2020). Towards circular economy in the household appliance industry: An overview of cases. Resources. 9(11), 128.
BITKOM; VDMA; ZVI. (2016). Implementation strategy industrie 4.0: report on the results of the industrie 4.0 platform. Frankfurt, Alemanha.
Bouzon, M. et. al. (2010). Panorama prático-teórico do Ambiente de Recuperação de Produtos: Um Estudo de Caso em uma Remanufatura de Produtos de Telecomunicações. XXIX Encontro nacional de engenharia de produção, São Carlos, São Paulo: ABEPRO. Acesso em: 02 de nov. de 2021.
Butzer, S. et al. (2016). Identification of approaches for remanufacturing 4.0. In: 2016 IEEE European Technology and Engineering Management Summit (E-TEMS). IEEE. p. 1-6.
Dantas, T. et al. (2021). How the combination of Circular Economy and Industry 4.0 can contribute towards achieving the Sustainable Development Goals. Sustainable Production and Consumption, 26, 213-227.
Chopra, S. & Meindl, P. (2014). Gerenciamento da cadeia de suprimentos. Estratégia, planejamento e operações. Ed. Peasson/ Pentice Hall. São Paulo. 2004.
Da Silva, S. (2020). Uma análise bibliométrica da literatura sobre supply chain management (SCM).
Macarthur, E. et al. (2013). Towards the circular economy. Journal of Industrial Ecology, 2, 23-44.
Nuraini, W. (2020). Analisis Perbandingan Aplikasi Manajemen Referensi Zotero 5.0. 66. dan Endnote X9. Publication Library and Information Science, 3(2), p. 80-86.
European Parliament. (2016) Industry 4.0. União Europeia.
Geng, Y. et al. (2011). Towards a national circular economy indicator system in China: An evaluation and critical analysis. Journal of Cleaner Production. 23, 216-224.
Giuntini, R. & Gaudete, K. (2003). Remanufacturing: The next great opportunity for boosting US productivity. https://www.sciencedirect.com/science/article/abs/pii/S0007681303000879
Gobbo, J. A. et al. (2018). Making the links among environmental protection, process safety, and industry 4.0. Segurança de Processos e Proteção Ambiental, 117, 372-382.
Gray, C & Charter, M. (2006). Remanufacturing and product design - designing for the 7th Geration. The Centre for Sustainable Desing.
Hermann, M. et al. (2016). Design principles for industrie 4.0 scenarios: a literature review. Annual Hawaii International Conference On System Sciences, 49. Estados Unidos. Proceedings.Washington, DC: IEEE Computer Society. 3928 – 3937.
Hofmann, E. & Rüsch, M. (2017). Industry 4.0 and the current status as well as future prospects on logistics. Computers in Industry. Elsevier.
H.-J. Bullinger, (2019). Handbuch Unternehmens organisation – Strategien, Planung, Umsetzung, “Berlin: Springer.
Kagermann, H. et al. (2013). Recommendations for implementing the strategic initiative Industrie 4.0: Final report of the Industrie 4.0 Working Group.
Martins, G. (2006). Administração de materiais e recursos patrimoniais. Saraiva.
Östlin, E. & Björkman, M. (2009). Product Life-Cycle Implications for Remanufacturing Strategies. Journal of Cleaner Production, 17(11), p. 999-1009.
Pearce, D. W., &Turner, R. K. (1990). Economics of natural resources and the environment. Hemel Hempstead, Herts: Harvester Wheatsheaf.
Poirier, C. & Reiter, E. (1997). Otimizando sua rede de negócios. Futura.
Rosa, P. et al. (2020). Assessing relations between Circular Economy and Industry 4.0: a systematic literature review. International Journal of Production Research, 58(6). 1662-1687.
Schmidt, R. et al. (2015). Industry 4.0 - potentials for creating smart products: empirical research results. International Conference On Business Information Systems (Bis), 18. Poznán, Polônia. Proceedings... [s.l.]: Springer International Publishing. p.16 - 27.
Steinhilper R. (1999). Produktrecycling – Vielfachnutzen durch Mehrfachnutzung, Stuttgart: Fraunhofer IRB Verlag.
Van, J. & Waltman, L. Text Mining and Visualization Using VOSviewer. ISSI Newsletter. 2011, 7(3), 50–54, (paper, preprint) (arXiv:1109.2058). https://www.vosviewer.com/text-mining-and-visualization-using-vosviewer
Guerra, B. et al. (2021) Circular economy applications in the construction industry: A global scan of trends and opportunities. Journal of Cleaner Production, 324, 129125.
Bernard, S. (2011). Remanufacturing. Journal of Environmental Economics and Management, 62(3). 337-351.
Silvestre, B. & Ţîrcă, D. (2019). Innovations for sustainable development: Moving toward a sustainable future. Journal of Cleaner Production, 208, 325-332.
Dantas, T. et al. (2021). How the combination of Circular Economy and Industry 4.0 can contribute towards achieving the Sustainable Development Goals. Sustainable Production and Consumption, 26, 213-227.
Park, S. (2016). Development of innovative strategies for the Korean manufacturing industry by use of the connected smart factory (CSF). Procedia Computer Science, 91, 744-750.
Inoue, M. et al. (2020). "A Modular Design Strategy considering Sustainability and Supplier Selection." Journal of Advanced Mechanical Design, Systems, and Manufacturing 14.2 JAMDSM0023. Web.
Bal, A. & Fazleena B. (2020). "A Multi-Objective Facility Location Model to Implement Circular Economy." Procedia Manufacturing 51 1592-599. Web.
Spaltini, M. et al. (2021). "A Quantitative Framework for Industry 4.0 Enabled Circular Economy." Procedia CIRP 98 115-20. Web.
Tiwari, D. et al. (2021). "A Review of Circular Economy Research for Electric Motors and the Role of Industry 4.0 Technologies." Sustainability (Basel, Switzerland) 13.17 9668. Web.
Kerin, M. & Duc T. (2019). "A Review of Emerging Industry 4.0 Technologies in Remanufacturing." Journal of Cleaner Production 237 117805. Web.
Fofou, F. et al. (2021). "A Review on the Lifecycle Strategies Enhancing Remanufacturing." Applied Sciences 11.13 5937. Web.
Manavalan, E. & Jayakrishna K. (2019). "An Analysis on Sustainable Supply Chain for Circular Economy." Procedia Manufacturing 33 477-84. Web.
Bag, S. et al. (2021). "Application of Industry 4.0 Tools to Empower Circular Economy and Achieving Sustainability in Supply Chain Operations." Production Planning & Control Ahead-of-print.Ahead-of-print: 1-23. Web.
Kravchenko, M. et al. (2020). Circular economy enabled by additive manufacturing: Potential opportunities and key sustainability aspects. Paper presented at the Proceedings of the NordDesign Conference, NordDesign 2020, Retrieved from www.scopus.com.
Rizvi, S. W. H., Agrawal, S., & Murtaza, Q. (2021). Circular economy under the impact of IT tools: A content-based review. International Journal of Sustainable Engineering, 14(2), 87-97. doi:10.1080/19397038.2020.1773567.
Delpla, V., Kenné, J., & Hof, L. A. (2021). Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains. International Journal of Advanced Manufacturing Technology, doi:10.1007/s00170-021-08058-3.
Ingemarsdotter, E. K, E. Jamsin, G.W., Kortuem, A. R., & Balkenende. (2019)."Circular Strategies Enabled by the Internet of Things: A Framework and Analysis of Current Practice." Sustainability (Basel, Switzerland) 11.20 5689. Web.
Victor, D., Hof Lucas, A., & Jean-Pierre, K. (2020). Closed loop supply chain optimization for circular manufacturing using industry 4.0 technologies. Paper presented at the Interconnected Supply Chains in an Era of Innovation - Proceedings of the 8th International Conference on Information Systems, Logistics and Supply Chain, ILS 2020, 220-227. Retrieved from www.scopus.com.
Ke, X., Ki P. K., & David, N. (2020). "Cloud-BIM Enabled Cyber-Physical Data and Service Platforms for Building Component Reuse." Sustainability Basel, Switzerland, 10329. Web.
Roda-Sanchez, L., Garrido-Hidalgo, C., García, A. S., Olivares, T., & Fernández-Caballero, A. (2021). Comparison of RGB-D and IMU-based gesture recognition for human-robot interaction in remanufacturing. International Journal of Advanced Manufacturing Technology, doi:10.1007/s00170-021-08125-9.
Cezarino, Oranges L., Liboni B. L., Stefanelli, N., Garcia O. B., & Conde S. L. (2021). "Diving into Emerging Economies Bottleneck: Industry 4.0 and Implications for Circular Economy." Management Decision 59.8 1841-862. Web.
Ramakrishna, S., Ngowi A., De Jager H., & O Awuzie B. (2020). "Emerging Industrial Revolution: Symbiosis of Industry 4.0 and Circular Economy: The Role of Universities." Science, Technology & Society (New Delhi, India) 25.3 505-25. Web.
Roda-Sanchez, L., Garrido-Hidalgo, C., García, A. S., Olivares, T., & Fernández-Caballero, A. (2021). Comparison of RGB-D and IMU-based gesture recognition for human-robot interaction in remanufacturing. International Journal of Advanced Manufacturing Technology, doi:10.1007/s00170-021-08125-9.
Yang, S. (2019). Global challenges and market transformation in support of remanufacturing. Remanufacturing in the circular economy: Operations, engineering and logistics. 169-210 10.1002/9781119664383.ch7 Retrieved from www.scopus.com.
Bag, Surajit, Shivam G., & Sameer K. (2021). "Industry 4.0 Adoption and 10R Advance Manufacturing Capabilities for Sustainable Development." International Journal of Production Economics 231 107844. Web.
Khan, Syed A. R., Asif R., Zhang Y., & Sharon M. (2021). "Industry 4.0 and Circular Economy Practices: A New Era Business Strategies for Environmental Sustainability." Business Strategy and the Environment Business Strategy and the Environment, 2021-06-21. Web.
Massaro, M., Secinaro, S., Dal Mas F., Brescia V., & Calandra D. (2021). "Industry 4.0 and Circular Economy: An Exploratory Analysis of Academic and Practitioners' Perspectives." Business Strategy and the Environment 30.2 1213-231. Web.
Dev, Navin K, Shankar, R., & Fahham, H. Q. (2020). "Industry 4.0 and Circular Economy: Operational Excellence for Sustainable Reverse Supply Chain Performance." Resources, Conservation and Recycling 153 104583. Web.
Bag, Surajit, Gunjan Y., Wood L., Dhamija, P., & Sudhanshu J. (2020). "Industry 4.0 and the Circular Economy: Resource Melioration in Logistics." Resources Policy 68 101776. Web.
Okorie, O., Salonitis, K., Charnley, F., Moreno, M., Turner, C., & Tiwari, A. (2019). Manufacturing data for the implementation of data-driven remanufacturing for the rechargeable energy storage system in electric vehicles doi:10.1007/978-3-030-04290-5_28 Retrieved from www.scopus.com.
Ghoreishi, M., & Ari Happonen. (2020). "New Promises AI Brings into Circular Economy Accelerated Product Design: A Review on Supporting Literature." E3S Web of Conferences 158 6002. Web.
Yang, Shanshan, Aravind M. R, Jacek, K., & Pepin, H. (2018). "Opportunities for Industry 4.0 to Support Remanufacturing." Applied Sciences 8.7 1177. Web.
Bagalagel, S., & ElMaraghy, W. (2020). Product mix optimization model for an industry 4.0-enabled manufacturing-remanufacturing system. Paper presented at the Procedia CIRP, 93 204-209. 10.1016/j.procir.2020.03.029 Retrieved from www.scopus.com.
Nava, C. (2020). PVCUPCYCLING - circular economy and zero waste: "upcycling" waste from electrical systems. Environmental Engineering and Management Journal, 19(10), 1823-1829. Retrieved from www.scopus.com.
Blömeke, S., Rickert, J., Mennenga, M., Thiede, S., Spengler, T. S., & Herrmann, C. (2020). Recycling 4.0 - mapping smart manufacturing solutions to remanufacturing and recycling operations. Paper presented at the Procedia CIRP, 10.1016/j.procir.2020.02.045 Retrieved from www.scopus.com.
Subramoniam, R., Erik S., Suresh S., & Donald, H. (2021). "Riding the Digital Product Life Cycle Waves towards a Circular Economy." Sustainability (Basel, Switzerland) 13.16 8960. Web.
Galparoli, S., Caielli, A., Rosa, P., & Terzi, S. (2021). Semi-automated PCB disassembly station doi:10.1007/978-3-030-74886-9_4 www.scopus.com.
Charnley, F., Divya T., Windo H., Mariale M., Okechukwu O., & Ashutosh T. (2019). "Simulation to Enable a Data-Driven Circular Economy." Sustainability (Basel, Switzerland) 11.12 3379. Web.
Kerin, M., & Duc T. P. (2020). "Smart Remanufacturing: A Review and Research Framework." Journal of Manufacturing Technology Management 31.6 1205-235. Web.
Turner, C., Mariale M., Luigi M., Konstantinos S., Fiona C., Ashutosh T., & Windo H. (2019). "Sustainable Production in a Circular Economy: A Business Model for Re-Distributed Manufacturing." Sustainability (Basel, Switzerland) 11.16 4291. Web.
Tsai, F. M., Tat-Dat B., Ming-Lang T., Mohd Helmi A., Ming K L., & Anthony SF C. (2021). "Sustainable Supply Chain Management Trends in World Regions: A Data-driven Analysis." Resources, Conservation and Recycling 167 105421. Web.
Zhang, Yingfeng, S. L., Yang, L., Yang, H. Miao Li, Huisingh, D., & Lihui Wang. (2018). "The ‘Internet of Things’ Enabled Real-time Scheduling for Remanufacturing of Automobile Engines." Journal of Cleaner Production 185 562-75. Web.
Alcayaga, A., Wiener, M. & Hansen, E. (2019). "Towards a Framework of Smart-circular Systems: An Integrative Literature Review." Journal of Cleaner Production 221 622-34. Web.
Bressanelli, G. Saccani, N., Perona, M & Baccanelli, I. (2020). "Towards Circular Economy in the Household Appliance Industry: An Overview of Cases." Resources (Basel) 9.128 128. Web.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Alexandre Fernando Coutinho da Silva; Anderson de Oliveira Ribeiro; Bruna Sacramento de Souza Cruz; Caique Pereira de Almeida; Kelly Alonso Costa; Francisco Santos Sabbadini
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
