Spunbond-Meltblown-Spunbond as a solution for surgical mask in the Covid-19 pandemic: case A98

Authors

DOI:

https://doi.org/10.33448/rsd-v11i12.31334

Keywords:

Masks; Respiratory protective devices; Facial masks; Pandemics.

Abstract

The study aimed to propose the use of SMS as a material for manufacturing the high protection A98 surgical mask, verify the material’s structure, check the technical specifications of NBR 15052 and check the direct cost of manufacturing throughout the Covid-19 pandemic. Method: descriptive exploratory research of a case study type, in a tertiary reference teaching hospital for the treatment of Covid-19. The requirements tests were based on ABNT NBR 15052. To evaluate the new use of SMS, the microstructure and morphology of the netting, Scanning Electron Microscopy was used. Results: SMS is an effective material solution for the manufacturing of surgical masks. The Meltblown layer of SMS can be an innovative design solution using adjustable pleats, with no seams at the nose and chin line, to prevent the needle holes from breaking the mask’s filter element. Different combinations of SMS use (already sterilized/new) were tested; a 40g double layer was used in the A-98 mask. The direct costs of the inputs used to produce one piece of the mask were R$0.204. Conclusion: The SMS proposal for manufacturing the surgical mask met all the requirements when compared to NBR 15052: there was no structural or morphological change in the material with two sterilization processes. The production cost was 20 times less than the market prices observed at the peak of the pandemic. The study was not of a commercial type and aimed to provide a prompt response to the greatest public health crisis seen in Brazil.

Author Biographies

Thassiana de Almeida Miotto Barbosa, Universidade Estadual de Londrina

Professor of the Department of Fashion Design.Acted in the design, procurement, analysis and interpretation of data. Writing of the article or relevant critical review of intellectual content. Final approval of the version to be published. Responsible for all aspects of the work.

Marilia Ferrari Conchon, Universidade Estadual de Londrina

Professor of the Nursing Department.Writing of the article or relevant critical review of intellectual content. Final approval of the version to be published. Responsible for all aspects of the work.

Valdirene Aparecida Vieira Nunes, Universidade Estadual de Londrina

Professor of the Department of Fashion Design.Acted in the design, procurement, analysis and interpretation of data. Writing of the article or relevant critical review of intellectual content. Final approval of the version to be published. Responsible for all aspects of the work.

Seila Cibele Sitta Preto, Universidade Estadual de Londrina

Conception and design of the research. Writing of the manuscript. Critical revision of the manuscript regarding important intellectual content. Diagramming the images.

Lucimar de Fátima Bilmaia Emídio, Universidade Estadual de Londrina

Conception, obtaining, analysis and interpretation of data. Writing of the article or relevant critical review of intellectual content. Final approval of the version to be published. Responsible for all aspects of the work.

Patrícia de Mello Souza, Universidade Estadual de Londrina

Conception, obtaining, analysis and interpretation of data. Writing of the article or relevant critical review of intellectual content. Final approval of the version to be published. Responsible for all aspects of the work.

References

Agência Nacional de Vigilância Sanitária (ANVISA) (2020). Resolução - RDC Nº 356, de 23 de março de 2020. Dispõe, de forma extraordinária e temporária, sobre os requisitos para a fabricação, importação e aquisição de dispositivos médicos identificados como prioritários para uso em serviços de saúde, em virtude da emergência de saúde pública internacional relacionada ao SARS-CoV-2. Brasília, DF. http://www.in.gov.br/en/web/dou/-/resolucao-rdc-n-356-de- -23-de-marco-de-2020-249317437

Agência Nacional de Vigilância Sanitária (ANVISA) (2021). Nota Técnica GVIMS/GGTES/ANVISA 04/2020. Orientações para serviços de saúde: medidas de prevenção e controle que devem ser adotadas durante a assistência aos casos suspeitos ou confirmados de infecção pelo novo Coronavírus (SARS-COV-2). Brasília, DF. https://ameci.org.br/wp-content/uploads/2021/02/NOTA-TECNICA-GVIMS_GGTES_ANVISA-04_2020-25.02-para-o-site.pdf

Arons, M. M., Hatfield, K. M., Reddy, S. C., Kimball, A., James, A., & Jacobs, J. R., et al. (2020). Presymptomatic SARS-CoV-2 infections and transmission in a skilled nursing facility. The New England Journal of Medicine, 382(22), 2081-2090. https://www.nejm.org/doi/pdf/10.1056/NEJMoa2008457

Associação Brasileira da Indústria Têxtil e de Confecção (ABIT) (2020). Máscaras tire suas dúvidas. ABIT. https://www.abit.org.br/noticias/mascaras-tire-suas-duvidas

Associação Brasileira de Enfermeiros de Centro Cirúrgico, Recuperação Anestésica e Centro de Material E Esterilização – SOBECC (2017). Diretrizes de práticas em enfermagem cirúrgica e processamento de produtos para a saúde. 7ª ed. Barueri: Manole

Associação Brasileira de Normas Técnicas. ABNT NBR 13698 (2011). Equipamento de proteção respiratória: peça semifacial filtrante para partículas. Rio de Janeiro. https://www.zambini.org.br/pdfs/ABNT%20NBR%2013698-2011%20%20-%20Equipamento%20de%20prote%C3%A7%C3%A3o%20respirat%C3%B3ria%20%E2%80%94%20Pe%C3%A7a%20semifacial%20filtrante%20para%20part%C3%ADculas.pdf

Associação Brasileira de Normas Técnicas. ABNT NBR 14873 (2002). Não tecido para artigos de uso odonto-médico-hospitalar: determinação de eficiência de filtração bacteriológica. Rio de Janeiro. https://drive.google.com/file/d/1KjyxuhDL_S2iuGw1grzCYFDFOIJyNbi8/view

Associação Brasileira de Normas Técnicas. ABNT NBR 15052 (2004). Artigos de não tecido de uso odonto-médico hospitalar - Máscaras cirúrgicas - Requisitos. Rio de Janeiro. https://www.zambini.org.br/pdfs/ABNT%20NBR%2015052-2004%20%20-%20Artigos%20de%20n%C3%A3otecido%20de%20uso%20odonto-m%C3%A9dico-hospitalar%20-%20M%C3%A1scaras%20cir%C3%BArgicas%20-%20Requisitos.pdf

ASTM D1117-01 (2001). Standard guide to evaluation of nonwoven tissues (Withdrawn 2009). ASTM International, West Conshohocken, PA. https://www.techstreet.com/standards/astm-d1117-01?product_id=960181

ASTM F2100-19e1 (2019). Standard specification for performance of materials used in medical face masks, ASTM International, West Conshohocken, PA. https://doi.org/10.1520/F2100-19E01.

Barbosa, T. A. M., Nogueira, D. N. G., Emídio, L. F. B., Preto, S. C. S., Souza, P. M., & Nunes, V. A. V. (2020). Design, saúde e integração social no enfrentamento da pandemia Covid-19: case máscara de alta proteção AZUL A-98. Projética 11, (suppl 1), 276-308. http://dx.doi.org/10.5433/2236-2207.2020v11n1suplp276

European Standards (2019). UNE EN 14683:2019+AC:2019. Medical face masks -requirements and test methods. https:// www.en-standard.eu/une-en-14683-2019-ac- 2019-medicalface-masks-requirements-and-test-methods/

Feng, S., Shen, C., Xia, N., Wei, C., Mengzhen, F., & Cowling, B. J. (2020). Rational use of face masks in the COVID-19 pandemic. The Lancet Respiratory Medicine, 8, 434-436. https://doi.org/10.1016/S2213-2600(20)30134-X

Guetter, C. R., Williams, B. J., Slama, E., Arrington, A., Henrique, M. C., & Möller, M. G., et al. (2018). Greening the operating room. American Journal of Surgery, 216, (4), 683-638. https://doi.org/10.1016/j.amjsurg.2018.07.021

Helioterio, M. C., Lopes, F. Q. R. S., Sousa, C. C., Souza, F. O., Freitas, P. S. P., & Sousa, F. N. F., et al. (2020.) COVID-19: por que a proteção da saúde dos trabalhadores e trabalhadoras da saúde é prioritária no combate à pandemia? Trabalho, Educação e Saúde, 18, e00289121. https://doi.org/10.1590/1981-7746-sol00289

Hoelzel, C. G. M., & Ribeiro, L. C. M., (2020). Manual do projeto EPI -UFG. Goiânia: Cegraf UFG. https://files.cercomp.ufg.br/weby/up/1/o/Manual_ficha_catalografica_final.pdf

Howard, J., Huang, A., Li, Z., Tufekci, Z., Zdimal, V., & van der Westhuizen, H., et al. (2020). Face masks against COVID-19: an evidence review. PNAS, 30, 1-9. https://doi.org/10.1073/pnas.2014564118

Instituto Brasileiro para Segurança do Paciente (IBSP) (2020). COVID-19: optar pela máscara cirúrgica ou pela n95? São Paulo: IBSP. https://www.segurancadopaciente.com.br/protocolo-diretrizes/covid-19-optar-pela-mascara-cirurgica-ou-pela-n95/

Lai, A. C. K., Poon, C. K. M., & Cheung, A. C. T. (2012). Effectiveness of facemasks to reduce exposure hazards for airborne infections among general populations. Journal of the Royal Society, Interface, 9(70), 938-948. https://doi.org/10.1098/rsif.2011.0537

Medeiros, D. (2020). Nota Técnica 01/2020. Projeto EPI-UFG: Máscara de proteção descartável. Goiânia: UFG. https:// www.ufg.br/p/32441-epi-ufg

Public Health England (2020). When to wear a face mask or FFP3 respirator. London. https://www.fbu.org.uk/sites/default/files/circulars/attachments/When_to_use_face_mask_or_FFP3.pdf

Queiroz, R. S., Oliveira, G. P., & Silva, P. M. S. (2017). Manual de especificações para têxteis médicos. IPT.

Silva, D. M., Rodrigues, N. H., Silva, L. G. A., Souza, E., Oliveira, S. G., & Osório, A. P. (2020). Recomendações para a utilização de máscara em ambiente hospitalar durante a pandemia ocasionada pelo Coronavírus. Journal of Nursing and Health, 10 (n.esp), e20104010. https://periodicos.ufpel.edu.br/ojs2/index.php/enfermagem/article/view/18774/11463

The novel coronavirus outbreak: what we know and what we don't (2020). Cell, 180(6):1034-1036. https://doi.org/10.1016/j.cell.2020.02.027

World Health Organization (WHO) (2020a). Naming the coronavirus disease (COVID-19) and the virus that causes it. Geneva: World Health Organization.https://www.who.int/emergencies/diseases/novel-coronavirus-2019/technical-guidance/naming-the-coronavirus-disease-(covid-2019)-and-the-virus-that-causes-it

World Health Organization (WHO) (2020b). Infection prevention and control during health care when novel coronavirus (nCoV) infection is suspected: interim guidance. Geneva: World Health Organization. https://www.who.int/publications/i/item/10665-331495

World Health Organization (WHO) (2020c). Advice on the use of masks in the context of COVID-19: interim guidance. World Health Organization. https://apps.who.int/iris/handle/10665/331693

World Health Organization (WHO) (2020d). Mask use in the context of COVID-19: Interim guidance. Geneva: World Health Organization. https://www.who.int/publications/i/item/advice-on-the-use-of-masks-in-the-community-during-home-care-and-in-healthcare-settings-in-the-context-of-the-novel-coronavirus-(2019-ncov)-outbreak

Yin, R. K. (2017). Estudo de caso: planejamento e métodos. (5a ed.), Bookman.

Published

17/09/2022

How to Cite

NOGUEIRA, D. N. G. .; BARBOSA, T. de A. M. .; CONCHON, M. F.; NUNES, V. A. V. .; PRETO, S. C. S. .; EMÍDIO, L. de F. B. .; SOUZA, P. de M. . Spunbond-Meltblown-Spunbond as a solution for surgical mask in the Covid-19 pandemic: case A98. Research, Society and Development, [S. l.], v. 11, n. 12, p. e355111231334, 2022. DOI: 10.33448/rsd-v11i12.31334. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/31334. Acesso em: 25 apr. 2024.

Issue

Section

Health Sciences