Study of corrosion and microstructure in self-compacting cementitious composite with replacement of fine aggregate by glass residue




Corrosion; Cementium composite; Glass residue; Electrochemical impedance spectroscopy.


The objective of this work is to investigate corrosion and microstructure in self-adhesive cement composite with the replacement of the kid aggregate by glass residue. One of the most frequent pathologies found in reinforced concrete is corrosion of reinforcements that involves risks to the safety of the structure. Among the various techniques to study and evaluate corrosion in this work was chosen the electrochemical impedance spectroscopy (EIE) that characterizes a wide variety of electrochemical systems. Specimens were molded in the trace of 1:1:0,1:0.43 being a reference (without adding residue), others with substitution of 5%,15% and 20% in glass residue, in relation to the kid aggregate. The choice of the equivalent circuit was different depending on the number of materials used, for the reference sample a series resistive circuit was used with a second parallel circuit composed of an R resistance and a CPE phase element. For mixtures with glass residue, another R /CPE parallel circuit was added. Micrographs obtained through scanning electron microscopy (SEM) and X-ray dispersive energy spectrometry (EDS) were also performed.


Adesina, A., Azevedo, A. R. G. De, Amin, M., Hadzima-nyarko, M., Saad, I., Zeyad, A. M., & Tayeh, B. A. (2022). Fresh and mechanical properties overview of alkali-activated materials made with glass powder as precursor. Cleaner Materials, 3(October 2021), 100036.

ADI-SUPER25. (2021). ADI-SUPER ADI-SUPER Superplastificante para concreto –. 20–21.

Albéria Cavalcanti de Albuquerque. (2009). Estudo das propriedades de concreto massa com adição de partículas de borracha de pneu. Universidade Federal do Rio Grande do Sul.

EFNARC. (2002). Specification and Guidelines for Self-Compacting Concrete. Magazine of Concrete Research, 1–32.

Feliu, V., González, J. A., Andrade, C., & Feliu, S. (1998). Equivalent circuit for modelling the steel-concrete interface. I. experimental evidence and theoretical predictions. Corrosion Science, 40(6), 975–993.

Ghorbani, S., Taji, I., Tavakkolizadeh, M., Davodi, A., & de Brito, J. (2018). Improving corrosion resistance of steel rebars in concrete with marble and granite waste dust as partial cement replacement. Construction and Building Materials, 185, 110–119.

Hope, B. B., Page, J. A., & Ip, A. K. C. (1986). Corrosion rates of steel in concrete. Cement and Concrete Research, 16(5), 771–781.

Hu, J. Y., Zhang, S. S., Chen, E., & Li, W. G. (2022). A review on corrosion detection and protection of existing reinforced concrete (RC) structures. Construction and Building Materials, 325, 126718.

Luo, T., Hua, C., Liu, F., Sun, Q., Yi, Y., & Pan, X. (2022). Effect of adding solid waste silica fume as a cement paste replacement on the properties of fresh and hardened concrete. Case Studies in Construction Materials, 16, e01048.

Mahmood, A. H., & Kashani, A. (2022). 9 - Recycled glass as a concrete component: possibilities and challenges. In F. Colangelo, R. Cioffi, & I. Farina (Eds.), Handbook of Sustainable Concrete and Industrial Waste Management (pp. 187–209). Woodhead Publishing.

Mehta, P. K.; Monteiro, P. J. M. (2014). Concreto: microestrutura, propriedades e materiais (Ibracon (ed.)).

Meyer, Y. A., Menezes, I., Bonatti, R. S., Bortolozo, A. D., & Osório, W. R. (2022). EIS Investigation of the Corrosion Behavior of Steel Bars Embedded into Modified Concretes with Eggshell Contents. Metals, 12(3).

Meyer, Y., Bonatti, R., Bortolozo, A., & Osório, W. (2021). Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution. Journal of Solid State Electrochemistry, 25, 1–15.

Mohamed, I., Aliabdo, A., & Diab, A. (2015). Corrosion behaviour of reinforced steel in concrete with ground limestone partial cement replacement. Magazine of Concrete Research, 67, 1–15.

NBR 16697. (2018). Cimento Portland — Requisitos. Abnt, 1–9.

Novaes, A. H., Duarte, F., Riveiro, L. O., & Santos, T. E. (2019). Metodologia Cientifica Teoria e aplicação na educação a distância. In Petrolina - PE Universidade Federal do Vale do São Francisco (Vol. 53, Issue 9).

Osorio, W., Peixoto, L., & Garcia, A. (2009). Electrochemical corrosion behaviour of a Ti‐IF steel and a SAE 1020 steel in a 0.5 M NaCl solution. Materials and Corrosion, 61, 407–411.

Przemysław Czapik, Dominik Kuza, M. B. (2021). Influence of the waste glass uses on the cement mortar properties. Physical Sciences, February, 1–8.

Ribeiro, D. V. (2015). Uso da Espectroscopia de Impedância Eletroquímica (EIE) para monitoramento da corrosão em concreto armado. RIEM - IBRACON Structures and Materials Journal, 8(4).

Sagüés, A. A., Kranc, S. C., & Moreno, E. I. (1995). The time-domain response of a corroding system with constant phase angle interfacial component: Application to steel in concrete. Corrosion Science, 37(7), 1097–1113.

ASTM C150/C150M − 18.

Tuaum, A., Shitote, S., & Oyawa, W. (2018). Experimental study of self-compacting mortar incorporating recycled glass aggregate. Buildings, 8(2).

Tutikian, B. F. (2004). Método para dosagem de concretos auto- método para dosagem de concretos autoadensável.

Ribeiro, V. A.S, Oliveira A. F; Santos V C; Silva L R R; Torres, R. G.; Souza, M H B. (2022). Uso da Espectroscopia de Impedância Eletroquímica ( EIE ) para monitoramento da corrosão em concreto com resíduo de pneu e Metacaulim e investigação da sua microestrutura Use of Electrochemical Impedance Spectroscopy ( EIE ) for monitoring corrosion in co. Research, Society and Development, 11(7), 1–13.

Votorantim. (2020). Ficha de informações de segurança de produtos químicos – FISPQ – Revisão n°00 06/01/2020.



How to Cite

TORRES, R. G. .; MELO, M. de L. N. M. .; RIBEIRO, V. A. dos S. .; SANTOS, V. C. dos .; OLIVEIRA, A. F. . Study of corrosion and microstructure in self-compacting cementitious composite with replacement of fine aggregate by glass residue. Research, Society and Development, [S. l.], v. 11, n. 10, p. e117111032568, 2022. DOI: 10.33448/rsd-v11i10.32568. Disponível em: Acesso em: 4 oct. 2022.