Digital flow approach in rehabilitation work with fixed prosthesis: an integrative literature review
DOI:
https://doi.org/10.33448/rsd-v11i13.35998Keywords:
Dental prosthesis design; Computer-aided design; Technology dental.Abstract
In the fully digital workflow, intraorals, 3D printers and milling machines are used. Through the scanners it is possible to virtually register the patients, applying a digital impression, to later transfer the obtained data to the software, where the project will be carried out with the collaboration of the computer (CAD). The CAM part deals with the manufacturing stage of the restoration, with the help of a milling machine. This work aimed to carry out an integrative literature review about digital workflow in dental fixed prostheses. A search was performed in electronic databases Google Scholar, Scientific Electronic Library Online (SciELO) and Medical Literature Analysis and Retrieval System Online (MEDLINE), using the keywords: “Dental Prosthesis Planning”, “Computer-assisted design”, “Dental Technology”. Subsequently, the abstracts of the articles were read to choose those relevant to the topic and, thus, proceed to the reading of the article itself. Priority was given to studies with a publication date between 2010 and 2022. CAD/CAM has been used in dentistry since the 1980s, with the aim of fabricating prosthetic restorations. This technology is called chairside when scanning is performed directly in the patient's mouth and the rest in the clinic. The digital flow becomes a differential in cases of great complexity and aesthetically demanding. Despite the high cost of acquisition and the need for learning, its use must be considered in the daily routine of dental clinics, being viable for natural teeth and implants.
References
Abreu, L. O., Romão, C. B. P., Alves, J. V., Pinheiro, K. N. B., Silva, G. M. T., Oliveira, M. A. C., Sousa, R. V., Coura, R. M., Oliveira, N. V. S. G., & Oliveira Júnior, J. K. (2021). Reabilitação oral em coroa cerâmica com fluxo digital: relato de caso Research, Society and Developmen, 10 (14), e389101422212. https://doi.org/10.33448/rsd-v10i14.22212
Ahlholm, P., Sipilä, K., Vallittu, P., Jakonen, M., & Kotiranta, U. (2018). Digital versus conventional impressions in fixed prosthodontics: a review. Journal of Prosthodontics, 27(1), 35-41.
AhmED, K. E. (2018). We're going digital: the current state of CAD/CAM dentistry in prosthodontics. Primary Dental Journal, 7(2), 30-35.
Andrade, G. M. C., Almeida-Júnior, A. A., Navarro, C. M., & Spousto, M. R. (2013). O. 63-Existe associação entre o edentulismo e o estado nutricional? Uma revisão da literatura. Revista de Odontologia da UNESP, 37(Especial 2), 0-0.
Benic, G. I., Mühlemann, S., Fehmer, V., Hämmerle, C. H., & Sailer, I. (2016). Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part I: digital versus conventional unilateral impressions. The Journal of prosthetic dentistry, 116(5), 777-782.
Dawood, A., Marti, B. M., Sauret-Jackson, V., & Darwood, A. (2015). 3D printing in dentistry. British dental journal, 219(11), 521-529.
Dutton, E., Ludlow, M., Mennito, A., Kelly, A., Evans, Z., Culp, A., & Renne, W. (2020). The effect different substrates have on the trueness and precision of eight different intraoral scanners. Journal of Esthetic and Restorative Dentistry, 32(2), 204-218.
Kakapoyi, A. S., Pattanaik, S., Pattanaik, B., & Shaikh, N. (2021). Digital scanners in prosthodontics: A literature review. International Journal of Applied Dental Sciences. 7(2), 554-557
Joda, T., Ferrari, M., Gallucci, G. O., Wittneben, J. G., & Brägger, U. (2017). Digital technology in fixed implant prosthodontics. Periodontology 2000, 73(1), 178-192.
Joda, T., Zarone, F., & Ferrari, M. (2017). The complete digital workflow in fixed prosthodontics: a systematic review. BMC oral health, 17(1), 1-9.
Lima, R. S. P., Lima, G. S. P., Sendyk, W. R., Reis, F. C. S., Massuda, C. K. M., & Marão, H. F. (2022). Instalação de implante seguindo o fluxo digital: relato de caso clínico. Research, Society and Developmen, 11 (7), e55711729501. https://doi.org/10.33448/rsd-v11i7.29501
Logozzo, S., Franceschini, G., Kilpelä, A., Caponi, M., Governi, L., & Blois, L. (2011). Uma análise comparativa de scanners digitais 3D intraorais para odontologia restauradora. Internet J Med Technol , 5 (1), 1-2.
Ministério da Saúde (BR) (2012). Secretaria de Vigilância em Saúde. SB Brasil 2010: Pesquisa Nacional de Saúde Bucal: resultados principais. Brasília, DF: SVS. https://bvsms.saude.gov.br/bvs/publicacoes/pesquisa_nacional_saude_bucal.pdf
Nedelcu, R., Olsson, P., Nyström, I., & Thor, A. (2018). Finish line distinctness and accuracy in 7 intraoral scanners versus conventional impression: an in vitro descriptive comparison. BMC oral health, 18(1), 1-11.
Pegoraro, L. F. (2014). Fundamentos de Prótese Fixa. [Minha Biblioteca]. Retirado de https://integrada.minhabiblioteca.com.br/#/books/9788536702469/
Richert, R., Goujat, A., Venet, L., Viguie, G., Viennot, S., Robinson, P., & Ducret, M. (2017). Intraoral scanner technologies: a review to make a successful impression. Journal of healthcare engineering, 2017(1), 1-9
Sannino, G., Germano, F., Arcuri, L., Bigelli, E., Arcuri, C., & Barlattani, A. (2014). Cerec CAD/CAM chairside system. ORAL & implantology, 7(3), 57
Saavedra, G., de Andrade, G. S., de Carvalho, A. B. G., Barchetta, N. F., Francci, C. E., & Viegas, D. C. (2022). Tecnologia CAD/CAM na Odontologia Restauradora. Restaurações Cerâmicas, 1(1), 313-369.
Sousa, L. M. M. S., Marques-Vieira, C. M. A., Severino, S. S., & Antunes, A. V. (2017). Metodologia de revisão integrativa da literatura em enfermagem. Revista Investigação Enfermagem, Ser. II (21), 17-26
Torabi, K., Farjood, E., & Hamedani, S. (2015). Rapid prototyping technologies and their applications in prosthodontics, a review of literature. Journal of Dentistry, 16(1), 1.
Tordiglione, L., De Franco, M., & Bosetti, G. (2016). The prosthetic workflow in the digital era. International Journal of Dentistry, 2016(1), 1-7.
Volpato, C. A. M., Garbelotto, L. G. D., Zani, I. M., Vasconcellos, D. K., et al. (2012). Prótese Odontológica. Uma Visão Contemporânea. São Paulo: Santos.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Flamarion Marinho Costa; Gabriel Nícolas Silva Moura; Ricardo Kiyoshi Yamashita
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
