Ceramic laminates: planning, execution and possible failures
DOI:
https://doi.org/10.33448/rsd-v11i10.36661Keywords:
Dental aesthetics; Ceramic laminates; Dental porcelain; Longevity; Ceramic laminates faults.Abstract
Introduction: It is known that success in the dental field is related to the correct treatment planning. As in any aesthetic treatment, in restorations with ceramic laminates, failures may occur, among them we can mention ceramic laminates with over contour that can lead to iatrogenic gingivitis; bone loss; postoperative sensitivity and also to fractures or chipping of the laminate. Objective: to identify what the literature brings about execution, failures and damage that can occur due to treatment with ceramic laminates. Methodology: a bibliographic research was carried out between 2021 and 2022 in the databases, Pubmed, Scielo, in clinical research articles, in vitro and in situ studies, systematic review, and cross-sectional study on ways of execution and failures of ceramic laminates. 150 articles were found and after reading the abstracts, 20 of them were selected according to the proposed theme.Websites and magazines were used, 20 articles were used. Result and conclusion of the study: The main factors that lead to the failure of ceramic laminates are errors in case selection, planning, laboratory failures, inadequate preparations, failures in cementation, and lack of follow-up. In view of this, the theoretical and practical knowledge of the professional in cases of ceramic laminates is of paramount importance, so that such failures can be minimized.
References
Alzain, A. (2009). No–Preparation porcelain veneers. Indianopolis. Dissertação. School of Dentistry,8 of Indiana.
Barboni, G., K. Problemas periodontais ocasionados pelo insucesso das lentes de contato: Relato de caso, tcc. 20f. (2020). Unicesumar - Universidade Cesumar: Maringá
Blunck, U., Fischer, S., Hajtó, J., Frei, S., & Frankenberger, R. (2020). Ceramic laminate veneers: effect of preparation design and ceramic thickness on fracture resistance and marginal quality in vitro. Clinical Oral Investigations, 24(8), 2745–2754. Recuperado de: https://doi.org/10.1007/s00784-019-03136-z
Cardoso, P. C., & Curcio, R. (2015). Facetas: lentes de contato e fragmentos cerâmicos. Editora Ponto.
Correa, B. P. (2017). Preparo para laminados cerâmicos: revisão da literatura, tcc. Universidade do Sul de Santa Catarina
Correa, G. G., Pereira, I. F., Gauger, A. L. D. S., Jung, L. B., Valduga, A. P., & Gonçalves, L. D. S. (2021). Conceitos atuais sobre a performance clínica e principais falhas do tratamento restaurador com laminados cerâmicos: uma revisão da literatura. Revista da Faculdade de Odontologia - UPF, 25(3), 362–369. Recuperado de: https://doi.org/10.5335/rfo.v25i3.12142
Chai, Sy Yin et al. Incisal preparation design for ceramic veneers. The Journal of the American Dental Association, 149(1), 25-37, (2018). Recuperado de: https://doi.org/10.1016/j.adaj.2017.08.031.
Cruz, Alessandro Ítalo et al. Troca de facetas em resina composta insatisfatórias, buscando adequação anatômica e estética: relato de caso. Research, Society and Development, v. 10, n. 14, p. e169101421740, 30 out. (2021). Recuperado em: https://doi.org/10.33448/rsd-v10i14.21740
Gabaldi, T. A. S., Cimentação de laminados cerâmicos: materiais e falhas. (2015)., Porto-velho / RO.
Inácio, C. C., A., & Mendes, S. N. (2019), laminados cerâmicos, indicações e contraindicações: Revisão de literatura. Taubaté-SP, Universidade de Taubaté.
Medeiros, F., L., L. Longevidade dos laminados cerâmicos minimamente invasivos: uma revisão sistemática da literatura.uma revisão sistemática da literatura. (2015). Monografia (Graduação) - Departamento de Odontologia, Universidade Federal do Rio Grande do Norte, Natal.]p
Radz G. M. (2011). Minimum thickness anterior porcelain restorations. Dental clinics of North America, 55(2), 353–ix. Recuperado de: https://doi.org/10.1016/j.cden.2011.01.006
RIBEIRO, Adriana Barbosa et al. Abordagem do insucesso de laminados cerâmicos ultrafinos na clínica odontológica. Uma revisão de Literatura / Resilience in approaching the failure of ultrathin ceramic laminates in the dental clinic. A Literature Review. Brazilian Journal of Development, 8(2), 14023-14033, 22 fev. 2022. Recuperado de: https://doi.org/10.34117/bjdv8n2-365.
Rodrigues, M., G., Pitta, F., R., Alexandre, R., S., L., Rodrigues, H., S., Fernando, A., M., Dias, B., P. (2012) Falhas em restaurações com facetas laminadas: uma revisão de literatura de 20 anos. Rio de janeiro.
Santos, A., Y., F., S., & Augusta, T. Lentes de contato dental: indicações e limitações. (2019). Orientador: Esp. Caren Cristine da Silva Batista. Porto Velho - RO.
Seydler, B., & Schimitter., M. Esthetic restoration of maxillary incisors using CAD/CAM chairside technology – a case report. (2011) Quintessence International.
Sousa, J. A. M., Lira, K. B. d. F., Paiva, D. F. F., Ribeiro, P. J. T., Silva, F. G. T. e., Barnabé, L. É. G., & Carolino, R. d. A. (2021). Retratamento em laminados cerâmicos minimamente invasivos: Uma revisão integrativa da literatura. Research, Society and Development, 10(4), Artigo e44710414062. Recuperado de: https://doi.org/10.33448/rsd-v10i4.14062.
Souza, V., L. Laminados cerâmicos em área estética. Rio de Janeiro. (2008). 63p. Monografia (Especialização). Ciodonto.
Skuk, D., & Tremblay, J. P. (2019). 43. Transplantation, 103, S12. Recuperado de: https://doi.org/10.1097/01.tp.0000581336.85084.c9
Zavanelli, A. C., Caetano, J. L., Da Silva, L. C., & Zavanelli, R. A. (2018). Previsibilidade do tratamento estético com lentes de contato cerâmicas. ARCHIVES OF HEALTH INVESTIGATION, 6(12). Recuperado de: https://doi.org/10.21270/archi.v6i12.2270
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Anna Caroline Martins Cabral ; Mara da Silva Alves; Marilia Zeczkowski
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
