Effect of Er, Cr: YSGG laser irradiation in the physics properties of different dentin bonding systems
DOI:
https://doi.org/10.33448/rsd-v11i16.38012Keywords:
Dentin bonding agents; Lasers; Dentin.Abstract
The aim of this study was to evaluate the effect of Er, Cr: YSGG laser irradiation in the physics properties of the different dentin bonding systems (DBS) applied in dentin substrate.This study presented two variation factors: laser, divided into two levels (Er, Cr: YSGG [L] and Control - not irradiated [C]) and DBS divided into four levels (AdperTM Scotchbond Multipurpose [MP], AdperTM Single Bond 2 [SB], ClearfilTM SE Bond [CSE], ScotchbondTM Universal Adhesive [SU]). The response variables were water sorption/solubility (mg/mm3) [WS/WSB], degree of conversion (%) [DC], microtensile bond strength (MPa) [MS] and scanning electron microscopy [SEM] for descriptive analysis. After application of DBS over dentin substrate and before curing, in the L groups the irradiation was performed over the primer on MP and CSE and after primer/adhesive on SB and SU. After 7 days, the specimens were cut to obtain squared-shape blocks for WS/WSB, slices for one-year DC/MEV and sticks for one-year MS. The data was analyzed by two-way ANOVA, followed by Tukey test for multiple comparisons (p<0.05).All irradiated groups presented lower WS/WSB than respective control groups. For DC, it was noted a significant difference only for DBS factor. However, laser irradiation promoted a significant drop in MS values, except for SU-L group. In SEM, greater penetration depth of resin tags were found for total-etch DBS, especially when laser irradiated.
References
Bail, M., Malacarne-Zanon, J., Silva, S. M. A., Anauate-Netto, A., Nascimento, F. D., Amore, R., Lewgoy, H., Pashley, D. H., & Carrilho, M. R. (2012). Effect of air-drying on the solvent evaporation, degree of conversion and water sorption/solubility of dental adhesive models. Journal of materials science. Materials in medicine, 23(3):629-38. https://doi.org/10.1007/s10856-011-4541-y.
Batista, G. R., Barcellos, D. C., Torres, C. R., Damião, A. J., Oliveira, H. P., & Gonçalves, S. E. (2015). Effect of Nd:YAG laser on the solvent evaporation of adhesive system. The international journal of esthetic dentistry, 10(4):598-609.
Brianezzi, L. F. F., Maenosono, R. M., Bim, O. Jr., Zabeu, G. S., Palma-Dibb, R. G., & Ishikiriama, S. K.(2017). Does laser diode irradiation improve the degree of conversion of simplified dentin bonding systems? Journal of applied oral science: revista FOB, 25(4), 381–386. https://doi.org/10.1590/1678-7757-2016-0461.
Castro, F. L., Campos, B. B., Bruno, K. F., & Reges, R. V. (2013).Temperature and curing time affect composite sorption and solubility. Journal of applied oral science: revista FOB. 21(2):157-62. https://doi.org/10.1590/1678-7757201302298.
Daronch, M., Rueggeberg, F. A., & De Goes, M. F. (2005). Monomer conversion of pre-heated composite. Journal of dental research, 84(7), 663–667. https://doi.org/10.1177/154405910508400716.
Franke, M., Taylor, A. W., Lago, A., & Fredel, M. C.(2006). Influence of Nd: YAG laserirradiation on an adhesive restorative procedure. Operative dentistry, 31(5), 604–609. https://doi.org/10.2341/05-110.
Giacomini, M. C., Scaffa, P. M. C., Gonçalves, R. S., Zabeu, G. S., Vidal, C. M. P., Carrilho, M. R. O., Honório, H. M., & Wang, L. (2020). Profile of a 10-MDP-based universal adhesive system associated with chlorhexidine: Dentin bond strength and in situ zymography performance. Journal of the mechanical behavior of biomedical materials, 110, 103925. https://doi.org/10.1016/j.jmbbm.2020.103925
Goncalves, S. E. D., de Araujo, M. A. M., & Demiao, A. J.(1999). Dentin bond strength:Influence of laser irradiation, acid etching, and hypermineralization. Journal of clinical laser medicine & surgery, 17(2):77-85.
Kermanshahi, S., Santerre, J. P., Cvitkovitch, D. G., & Finer, Y. (2010). Biodegradation of resin-dentin interfaces increases bacterial microleakage. Journal of dental research, 89(9), 996–1001. https://doi.org/10.1177/0022034510372885.
Lafuente, D. (212). SEM analysis of hybrid layer and bonding interface after chlorhexidine use. Operative dentistry, 37(2), 172–180. https://doi.org/10.2341/10-251-L.
Maenosono, R. M., Bim, O. Jr., Duarte, M. A., Palma-Dibb, R. G., Wang, L., & Ishikiriama, S. K. (2015). Diode laser irradiation increases microtensilebondstrength of dentin. Brazilian oral research, 29, 1–5. https://doi.org/10.1590/1807-3107bor-2015.vol29.0004.
Malacarne-Zanon, J., Pashley, D. H., Agee, K. A., Foulger, S., Alves, M. C., Breschi, L., Cadenaro, M., Garcia, F. P., & Carrilho, M. R. (2009). Effects of ethanol addition on the water sorption/solubility and percent conversion of comonomers in model dental adhesives. Dental materials : official publication of the Academy of Dental Materials, 25(10), 1275–1284. https://doi.org/10.1016/j.dental.2009.03.015.
Marimoto, A. K., Cunha, L. A., Yui, K. C., Huhtala, M. F., Barcellos, D. C., Prakki, A., & Gonçalves, S. (2013). Influence of Nd:YAG laser on the bond strengthof self-etching and conventional adhesive systems to dental hard tissues. Operative dentistry, 38(4), 447–455. https://doi.org/10.2341/11-383-L.
Meng, Y. C., Huang, F., Wang, S. L., Li, M. W., Lu, Y., & Pei, D. D. (2022). Zhonghua kou qiang yi xue za zhi = Zhonghua kouqiang yixue zazhi = Chinese journal of stomatology, 57(2), 173–181. https://doi.org/10.3760/cma.j.cn112144-20210516-00250
Moretto, S. G., Azambuja, N. Jr., Arana-Chavez, V. E., Reis, A. F., Giannini, M., Eduardo, C. de P., & De Freitas, P. M.(2011). Effects of ultramorphological changes on adhesion to lased dentin-scanning electron microscopy and transmission electron microscopy analysis. Microscopy research and technique, 74(8), 720–726. https://doi.org/10.1002/jemt.20949.
Muñoz, M. A., Luque, I., Hass, V., Reis, A., Loguercio, A. D., & Bombarda, N. H. (2013). Immediate bonding properties of universal adhesives to dentine. Journal of dentistry, 41(5), 404–411. https://doi.org/10.1016/j.jdent.2013.03.001.
Nishitani, Y., Yoshiyama, M., Donnelly, A. M., Agee, K. A., Sword, J., Tay, F. R., Pashley, D. H. (2006). Effects of resin hydrophilicity on dentin bond strength. ournal of dental research, 85(11), 1016–1021. https://doi.org/10.1177/154405910608501108.
Pashley, D. H., Tay, F. R., Breschi, L., Tjäderhane, L., Carvalho, R. M., Carrilho, M., & Tezvergil-Mutluay, A. (2011). State of the art etch-and-rinse adhesives. Dental materials: official publication of the Academy of Dental Materials, 27(1), 1–16. https://doi.org/10.1016/j.dental.2010.10.016.
Pashley, D. H., Tay, F. R., Carvalho, R. M., Rueggeberg, F. A., Agee, K. A., Carrilho, M., Donnelly, A., & García-Godoy, F. (2007). From dry bonding to water-wet bonding to ethanol-wet bonding. A review of the interactions between dentin matrix and solvated resins using a macromodel of the hybrid layer. American journal of dentistry, 20(1), 7–20.
Reis, A., Klein-Júnior, C. A., Accorinte, M. de L., Grande, R. H., dos Santos, C. B., & Loguercio, A. D. (2009). Effects of adhesive temperature on the early and 6-month dentin bonding. Journal of dentistry, 37(10), 791–798. https://doi.org/10.1016/j.jdent.2009.06.007.
Schaller, R., Barrault, S., & Zysset, Ph. (2004) Mechanical spectroscopy of bovine compact bone. Materials Science Engineering. 370 569–574.
Sideridou, I., Tserki, V., & Papanastasiou, G. (2003). Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials, 24(4), 655–665. https://doi.org/10.1016/s0142-9612(02)00380-0.
Tjäderhane, L., Nascimento, F. D., Breschi, L., Mazzoni, A., Tersariol, I. L., Geraldeli, S., Tezvergil-Mutluay, A., Carrilho, M., Carvalho, R. M., Tay, F. R., & Pashley, D. H. (2013). Strategies to prevent hydrolytic degradation of the hybrid layer—A review. Dental materials: official publication of the Academy of Dental Materials, 29(10), 999–1011. https://doi.org/10.1016/j.dental.2013.07.016.
Tjäderhane L. (2015). Dentin bonding: can we make it last? Operative dentistry, 40(1), 4–18. https://doi.org/10.2341/14-095-BL
Vale, M. R., Afonso, F. A., Borges, B. C., Freitas, A. C. Jr., Farias-Neto, A., Almeida, E. O., Souza-Junior, E. J., & Geraldeli, S. (2014). Preheating impact on the degree of conversion and water sorption/solubility of selected single-bottle adhesive systems. Operative dentistry, 39(6), 637–643. https://doi.org/10.2341/13-201-L
Van Meerbeek, B., Yoshihara, K., Yoshida, Y., Mine, A., De Munck, J., & Van Land. (2011). State of the art of self-etch adhesives. Dental materials: official publication of the Academy of Dental Materials, 27(1), 17–28. https://doi.org/10.1016/j.dental.2010.10.023
Zabeu, G. S., Brianezzi, L. F. F., Gonçalves, R. S., Maenosono, R. M., Palma-Dibb, R. G., Wang, L., & Ishikiriama, S. K.(2021). MDP-based universal adhesive system irradiated with Er,CR:YSGG: Analysis of its performance up to 6 months. Dental materials journal, 40(1), 150–156. https://doi.org/10.4012/dmj.2019-335
Yoshida, Y., Yoshihara, K., Nagaoka, N., Hayakawa, S., Torii, Y., Ogawa, T., Osaka, A., & Meerbeek, B.V. (2012). Self-assembled nano-layering at the adhesive interface. Journal of dental research, 91(4), 376–381. https://doi.org/10.1177/0022034512437375
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Leticia Ferreira de Freitas Brianezzi; Giovanna Speranza Zabeu; Regina Guenka Palma-Dibb ; Patricia Aparecida Ana ; Linda Wang; Sérgio Kiyoshi Ishikiriama
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
