Comparative study of direct and indirect bonding techniques of brackets in orthodontics
DOI:
https://doi.org/10.33448/rsd-v12i5.41624Keywords:
Corrective orthodontics; Orthodontics brackets; Dental bonding.Abstract
The present study aimed to compare the descriptions of both direct and indirect bracket bonding techniques in order to highlight their advantages and disadvantages. The methodological approach involved systematic research on the Pubmed and Virtual Health Library (BVS) platforms. Inclusion criteria considered experimental articles that utilized direct or indirect bonding techniques in orthodontic patients, published in Portuguese or English, up to 2022. Excluded from the review were abstracts, event proceedings, dissertations, monographs, theses, and books that did not address the topic. Based on the inclusion criteria, 234 studies were initially selected based on the reading of titles and objectives. After removing duplicate articles and those that did not meet the established criteria, 32 articles were selected for full reading, and of these, 11 studies were included in the study for meeting all the necessary requirements. The indirect technique made the orthodontic bracket bonding phase more efficient, reducing patient treatment time. However, both direct and indirect techniques demonstrated precision in bonding and shear strength resistance, as well as equivalent failure rates.
References
Aboujaoude, R., Kmeid, R., Gebrael, C., & Amm, E. (2022). Comparison of the accuracy of bracket positioning between direct and digital indirect bonding techniques in the maxillary arch: a three-dimensional study. Progress in Orthodontics, 23(1), 31. https://doi.org/10.1186/s40510-022-00426-3
Bellettini, C., Bellato, A., Cerveira, G., & Bacci, H. (2019). Avaliação da resistência à força de cisalhamento da colagem indireta de acessórios ortodônticos em quatro diferentes métodos. Rev Clín Ortod Dental Press, 18(2), 99–109. https://doi.org/https://doi.org/10.14436/1676-6849.18.1.099-109.art
Beyling, F., Schwestka-Polly, R., & Wiechmann, D. (2013). Lingual orthodontics for children and adolescents: improvement of the indirect bonding protocol. Head & Face Medicine, 9, 27. https://doi.org/10.1186/1746-160X-9-27
Bozelli, J. V., Bigliazzi, R., Barbosa, H. A. M., Ortolani, C. L. F., Bertoz, F. A., & Faltin Junior, K. (2013). Comparative study on direct and indirect bracket bonding techniques regarding time length and bracket detachment. In Dental Press Journal of Orthodontics (Vol. 18). scielo .
Castilla, A. E., Crowe, J. J., Moses, J. R., Wang, M., Ferracane, J. L., & Covell David A., J. (2014). Measurement and comparison of bracket transfer accuracy of five indirect bonding techniques. The Angle Orthodontist, 84(4), 607–614. https://doi.org/10.2319/070113-484.1
Czolgosz, I., Cattaneo, P. M., & Cornelis, M. A. (2020). Computer-aided indirect bonding versus traditional direct bonding of orthodontic brackets: bonding time, immediate bonding failures, and cost-minimization. A randomized controlled trial. European Journal of Orthodontics, 43(2), 144–151. https://doi.org/10.1093/ejo/cjaa045
Dearing, M. A. (2017). Changes in Marginal Ridge Alignment from Early Childhood to Late Adulthood in an Untreated Caucasian Population Using the Iowa Growth Study Sample [The University of Iowa PP - United States -- Iowa]. In ProQuest Dissertations and Theses. https://www.proquest.com/dissertations-theses/changes-marginal-ridge-alignment-early-childhood/docview/1929620502/se-2?accountid=26649
Demirovic, K., Slaj, M., Spalj, S., Slaj, M., & Kobaslija, S. (2018). Comparison of Shear Bond Strength of Orthodontic Brackets Using Direct and Indirect Bonding Methods in Vitro and in Vivo. Acta Informatica Medica : AIM : Journal of the Society for Medical Informatics of Bosnia & Herzegovina : Casopis Drustva Za Medicinsku Informatiku BiH, 26(2), 125–129. https://doi.org/10.5455/aim.2018.26.125-129
Dos Santos, A. L., Wambier, L. M., Wambier, D. S., Moreira, K. M., Imparato, J. C., & Chibinski, A. C. (2022). Técnicas ortodônticas de colagem de braquetes e falhas de adesão: revisão sistemática e metanálise. Revista de odontologia clínica e experimental, 14(9), e746–e755. https://doi.org/10.4317/jced.59768
El-Bokle, D., & Ahmed, F. (2023). Bracket positioning in orthodontics: Past and present. AJO-DO Clinical Companion, 3(2), 77–84. https://doi.org/https://doi.org/10.1016/j.xaor.2023.01.001
Ertugrul, B. Y., & Veli, İ. (2022). Evaluating the effects of orthodontic treatment with clear aligners and conventional brackets on mandibular condyle bone quality using fractal dimension analysis of panoramic radiographs. Journal of Stomatology, Oral and Maxillofacial Surgery, 123(5), 538–545. https://doi.org/https://doi.org/10.1016/j.jormas.2022.06.001
Espinoza-Montero, P. J., Montero-Jiménez, M., Fernández, L., Paz, J. L., Piñeiros, J. L., & Ceballos, S. M. (2022). In vitro wearing away of orthodontic brackets and wires in different conditions: A review. Heliyon, 8(9), e10560. https://doi.org/https://doi.org/10.1016/j.heliyon.2022.e10560
Fragelli, T. B. O. (2020). Honório HM, Santiago JF. Fundamentos das Revisões Sistemáticas em Odontologia. São Paulo: Quintessence Editora; 2018. Ciência & Saúde Coletiva, 25(3), 1167–1168. https://doi.org/10.1590/1413-81232020253.07972019
Fotovat, F., Shishehian, A., Alijani, S., Alafchi, B., & Parchami, P. (2022). Comparison of shear bond strength of orthodontic stainless-steel brackets on temporary crowns fabricated by three different methods: An in vitro study. International Orthodontics, 20(2), 100641. https://doi.org/https://doi.org/10.1016/j.ortho.2022.100641
Grünheid, T., Lee, M. S., & Larson, B. E. (2015). Transfer accuracy of vinyl polysiloxane trays for indirect bonding. The Angle Orthodontist, 86(3), 468–474. https://doi.org/10.2319/042415-279.1
Li, Y., Mei, L., Wei, J., Yan, X., Zhang, X., Zheng, W., & Li, Y. (2019). Effectiveness, efficiency and adverse effects of using direct or indirect bonding technique in orthodontic patients: a systematic review and meta-analysis. BMC Oral Health, 19(1), 137. https://doi.org/10.1186/s12903-019-0831-4
Menini, A., Cozzani, M., Sfondrini, M. F., Scribante, A., Cozzani, P., & Gandini, P. (2014). A 15-month evaluation of bond failures of orthodontic brackets bonded with direct versus indirect bonding technique: a clinical trial. Progress in Orthodontics, 15(1), 70. https://doi.org/10.1186/s40510-014-0070-9
Mota Júnior, S. L., de Andrade Vitral, J., Schmitberger, C. A., Machado, D. B., Avelar, J. C., Fraga, M. R., da Silva Campos, M. J., & Vitral, R. W. F. (2015). Evaluation of the vertical accuracy of bracket placement with the Boone gauge. American Journal of Orthodontics and Dentofacial Orthopedics, 148(5), 821–826. https://doi.org/https://doi.org/10.1016/j.ajodo.2015.05.028
Nojima, L. I., Araújo, A. S., & Alves Júnior, M. (2015). Indirect orthodontic bonding - a modified technique for improved efficiency and precision. In Dental Press Journal of Orthodontics (Vol. 20). scielo .
Petrescu, S.M.S., Țuculină, M. J., Popa, D. L., Duță, A., Sălan, A. I., Voinea Georgescu, R., Diaconu, O. A., Turcu, A. A., Mocanu, H., Nicola, A. G., & Dascălu, I. T. (2022). Modeling and Simulating an Orthodontic System Using Virtual Methods. Diagnostics, 12(5), 1296. https://doi.org/10.3390/diagnostics12051296
Plattner, J., Othman, A., Arnold, J., & Von See, C. (2020). Comparative Study between the Overall Production Time of Digitally Versus Conventionally Produced Indirect Orthodontic Bonding Trays. Turkish Journal of Orthodontics, 33, 232–238. https://doi.org/10.5152/TurkJOrthod.2020.18079
Rosenstiel, S. F., Land, M. F., & Walter, R. (2022). Contemporary Fixed Prosthodontics - E-Book. Elsevier Health Sciences. https://books.google.com.br/books?id=BKh2EAAAQBAJ
Sabbagh, H., Khazaei, Y., Baumert, U., Hoffmann, L., Wichelhaus, A., & Janjic Rankovic, M. (2022). Precisão da Transferência de Colchetes com a Técnica de Colagem Indireta — Uma Revisão Sistemática e Meta-Análise. Revista de Clínica Médica, 11(9), 2568. MDPI AG. Retirado de http://dx.doi.org/10.3390/jcm11092568
Santos, C. M. da C., Pimenta, C. A. de M., & Nobre, M. R. C. (2007). The PICO strategy for the research question construction and evidence search. In Revista Latino-Americana de Enfermagem (Vol. 15). scielo .
Sardarian, A., Danaei, S. M., Shahidi, S., Boushehri, S. G., & Geramy, A. (2014). The effect of vertical bracket positioning on torque and the resultant stress in the periodontal ligament--a finite element study. Progress in Orthodontics, 15(1), 50. https://doi.org/10.1186/s40510-014-0050-0
Shimizu, R. H., Grando, K. G., Shimizu, I. A., Andriguetto, A. R., Melo, A. C. M., & Witters, E. L. (2012). Assessment of shear bond strength of brackets bonded by direct and indirect techniques: an in vitro study. Dental Press Journal of Orthodontics, 17(4), 1–7. https://doi.org/10.1590/S2176-94512012000400008
Yıldırım, K., & Saglam-Aydinatay, B. (2018). Avaliação comparativa da eficácia do tratamento e dos efeitos adversos durante o tratamento ortodôntico sem extração de pacientes com má oclusão Classe I com ligação direta e indireta: ensaio clínico randomizado paralelo. American Journal of Orthodontics and Dentofacial orthopedics: publicação oficial da American Association of Orthodontists, suas sociedades constituintes e do American Board of Orthodontics, 154(1), 26–34. e1. https://doi.org/10.1016/j.ajodo.2017.12.009
Downloads
Published
Versions
- 12/05/2023 (2)
- 12/05/2023 (1)
How to Cite
Issue
Section
License
Copyright (c) 2023 Ayrla da Cunha Soares; Kalêcia dos Santos Dutra; Giselle Maria Ferreira Lima Verde ; Thiago Lima Monte ; Marconi Raphael de Siqueira Rêgo
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
