Free software navigation and 3D printing applied to the treatment of mandibular osteoma
DOI:
https://doi.org/10.33448/rsd-v12i14.44507Keywords:
Printing, three–dimensional; Virtual reality; Surgery, oral; Osteoma.Abstract
Introduction: Mandibular osteoma is a benign lesion that can cause facial asymmetry and compromise the patient's functionality. In these situations, surgical treatment is indicated. Virtual planning has been used by Oral and Maxillofacial Surgery and Traumatology, offering the possibility of detailed simulation of the intervention and creation of biomodels and surgical guides. Objective and case report: The article aims to explore the possibilities, benefits, challenges and limitations of virtual planning with free software for the surgical treatment of a patient with an osteoma in the mandibular body region. Surgical treatment for excision of the lesion was carried out in a hospital environment, under general anesthesia. Final considerations: The use of free software represents a viable alternative, especially in environments with limited financial resources, such as in the Unified Health System. These tools allow surgeons to create detailed three-dimensional models, biomodels and personalized surgical guides, improving precision and efficiency of procedures.
References
Abbate, V., Togo, G., Committeri, U., Zarone, F., Sammartino, G., Valletta, A., Elefante, A., Califano, L., & Dell'Aversana Orabona, G. (2023). Full Digital Workflow for Mandibular Ameloblastoma Management: Showcase for Technical Description. Journal of clinical medicine, 12(17), 5526.
Agarwal, S., Bhansali, S. P., Talreja, G., & Tiwari, A. (2021). Surgical Excision of Peripheral Osteoma of the Inferior Border of the Mandible by Extraoral Approach: A Case Report of Three Cases. Annals of maxillofacial surgery, 11(2), 333–335.
Alsaywid, B. S., & Abdulhaq, N. M. (2019). Guideline on writing a case report. Urology Annals, 11(2), 126– 131. 10.4103/UA.UA_177_18.
Bessho, K., Murakami, K., Iizuka, T., & Ono, T. (1987). Osteoma in mandibular condyle. International journal of oral and maxillofacial surgery, 16(3), 372–375.
Bhure, U., Roos, J. E., & Strobel, K. (2019). Osteoid osteoma: multimodality imaging with focus on hybrid imaging. European journal of nuclear medicine and molecular imaging, 46(4), 1019–1036.
Blackwell, M. C., Thakkar, B., Flores, A., & Zhang, W. (2023). Extracolonic manifestations of Gardner syndrome: A case report. Imaging science in dentistry, 53(2), 169–174.
Blender HQ – Amsterdam. (s.d.). System Requirements for Blender. https://www.blender.org/download/requirements/
Bodner, L., Gatot, A., Sion-Vardy, N., & Fliss, D. M. (1998). Peripheral osteoma of the mandibular ascending ramus. Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 56(12), 1446–1449.
Boffano, P., Roccia, F., Campisi, P., & Gallesio, C. (2012). Review of 43 osteomas of the craniomaxillofacial region. Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 70(5), 1093–1095.
Cutilli, B. J., & Quinn, P. D. (1992). Traumatically induced peripheral osteoma. Report of a case. Oral surgery, oral medicine, and oral pathology, 73(6), 667–669.
D'Agostino, S., Dell'Olio, F., Tempesta, A., Cervinara, F., D'Amati, A., Dolci, M., Favia, G., Capodiferro, S., & Limongelli, L. (2023). Osteoma of the Jaw as First Clinical Sign of Gardner's Syndrome: The Experience of Two Italian Centers and Review. Journal of clinical medicine, 12(4), 1496.
de Lima, L. B., Caixeta, M. A., & Viana, H. C. (2021). Prototipagem rápida confeccionada pela técnica da impressão tridimensional na cirurgia e implantodontia. Research, Society and Development, 10(12), e405101220633-e405101220633.
DeStefano, V., Khan, S., & Tabada, A. (2020). Applications of PLA in modern medicine. Engineered Regeneration, 76-87.
Estrela, C. (2018). Metodologia Científica: Ciência, Ensino, Pesquisa (3a ed.). Artes Médicas.
Ganry, L., Hersant, B., Bosc, R., Leyder, P., Quilichini, J., & Meningaud, J. P. (2018). Study of medical education in 3D surgical modeling by surgeons with free open-source software: Example of mandibular reconstruction with fibula free flap and creation of its surgical guides. Journal of stomatology, oral and maxillofacial surgery, 119(4), 262–267.
Ganry, L., Hersant, B., Quilichini, J., Leyder, P., & Meningaud, J. P. (2017). Use of the 3D surgical modelling technique with open-source software for mandibular fibula free flap reconstruction and its surgical guides. Journal of stomatology, oral and maxillofacial surgery, 118(3), 197–202.
Guidolin, L. R., Muller, A. F., Tonetto, M. S., Pletsch, A., Puricelli, E., Quevedo, A. S. D., & Ponzoni, D. (2022). Navegação em software livre e impressão 3D: princípios básicos e simulações em Cirurgia e Traumatologia Buco-Maxilo-Faciais. Research, society and development. 11(1), e57811125324, 11p.
Haas, O. L., Jr, Becker, O. E., & de Oliveira, R. B. (2014). Computer-aided planning in orthognathic surgery- systematic review. International journal of oral and maxillofacial surgery, S0901-5027(14)00430-5. Advance online publication.
Halawi, A. M., Maley, J. E., Robinson, R. A., Swenson, C., & Graham, S. M. (2013). Craniofacial osteoma: clinical presentation and patterns of growth. American journal of rhinology & allergy, 27(2), 128–133.
Kim, G. H., Yoon, Y. S., Kim, E. K., & Min, K. H. (2023). Frontal peripheral osteomas: a retrospective study. Archives of craniofacial surgery, 24(1), 24–27.
Larrea-Oyarbide, N., Valmaseda-Castellón, E., Berini-Aytés, L., & Gay-Escoda, C. (2008). Osteomas of the craniofacial region. Review of 106 cases. Journal of oral pathology & medicine: official publication of the International Association of Oral Pathologists and the American Academy of Oral Pathology, 37(1), 38–42.
Lazar, A., & Brookes, C. C. D. (2021). Giant Osteomas: Optimizing Outcomes Through Virtual Planning; a Report of Two Cases and Review of the Literature. Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons, 79(2), 366–375.
Lucamba, A. J., Grillo, R., Jodas, C. R. P., & Teixeira, R. G. (2023). Multiple Gardner Syndrome Osteomas Mimicking Temporomandibular Ankylosis: Case Report. Journal of maxillofacial and oral surgery, 1–4.
Mehra, P., Miner, J., D’Innocenzo, R., & Nadershah, M. (2011). Use of 3-D Stereolithographic Models in Oral and Maxillofacial Surgery. Journal of Oral and Maxillofacial Surgery, 6-13.
Miller, N. R., Gray, J., & Snip, R. (1977). Giant, mushroom-shaped osteoma of the orbit originating from the maxillary sinus. American journal of ophthalmology, 83(4), 587–591.
Movio, G., & Ahmed, S. (2023). Paranasal Osteoma: The Importance of Surveillance. Cureus, 15(9), e44696.
Onică, N., Onică, C. A., Tatarciuc, M., Baciu, E. R., Vlasie, G. L., Ciofu, M., Balan, M., & Gelețu, G. L. (2023). Managing Predicted Post-Orthognathic Surgical Defects Using Combined Digital Software: A Case Report. Healthcare (Basel, Switzerland), 11(9), 1219.
Ortega Beltrá, N., Matarredona Quiles, S., Martín Arroyo, M., & Pons Rocher, F. (2021). Mandibular osteoma as a cause of ankylosis and progressive trismus. BMJ case reports, 14(9), e244014.
Ostrofsky, M., Morkel, J. A., & Titinchi, F. (2019). Osteoma of the mandibular condyle: a rare case report and review of the literature. Journal of stomatology, oral and maxillofacial surgery, 120(6), 584–587.
Putro, Y. A. P., Magetsari, R., Taroeno-Hariadi, K. W., Dwianingsih, E. K., Pribadi, A. W., & Sukotjo, K. K. (2023). Classic and rare manifestations of multiple osteoma: A case report. International journal of surgery case reports, 110, 108713.
Serrano, D. R., Kara, A., Yuste, I., Luciano, F. C., Ongoren, B., Anaya, B. G., et al. (2023). 3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals. Pharmaceutics , 313.
Stelt, V. D., Verhulst, A. C., Vas Nunes, J. H., Koroma, T. A., Nolet, W. W., Slump, C. H., et al. (2020). Improving Lives in Three Dimensions: The Feasibility of 3D Printing for Creating Personalized Medical Aids in a Rural Area of Sierra Leone. The American journal of Tropical medicine and Hygine , 905-909.
Sun, Z., Wong, H. Y., & Yeong, H. C. (2023). Patient-Specific 3D-Printed Low-Cost Models in Medical Education and Clinical Practice. Micromachines, 14-56.
Taketomi, T., Imayama, K., Nakamura, K., & Kusukawa, J. (2023). An Isolated Laminar Osteoma Arising in the Maxillary Sinus. The American journal of case reports, 24, e938904.
Talmazov, G., Bencharit, S., Waldrop, T. C., & Ammoun, R. (2020). Accuracy of Implant Placement Position Using Nondental Open-Source Software: An In Vitro Study. Journal of prosthodontics: official journal of the American College of Prosthodontists, 29(7), 604–610.
Tarsitano, A., Ricotta, F., Spinnato, P., Chiesa, A. M., Di Carlo, M., Parmeggiani, A., Miceli, M., & Facchini, G. (2021). Craniofacial Osteomas: From Diagnosis to Therapy. Journal of clinical medicine, 10(23), 5584.
Tawashi, Y., Tawashi, K., Beski, T., & Alhakeem, K. (2023). Exophthalmos and hemiheadache caused by osteoma in the greater wing of sphenoid bone: an extremely rare case report. Annals of medicine and surgery (2012), 85(5), 2052–2055.
Vitorino, N. D. S. (2020). Uso de ferramenta de software livre no diagnóstico e tratamento tridimensional das deformidades dento-faciais.
Woertler K. (2003). Benign bone tumors and tumor-like lesions: value of cross-sectional imaging. European radiology, 13(8), 1820–1835.
Wolf-Grotto, I., Nogueira, L. M., Milani, B., & Marchiori, E. C. (2022). Management of giant osteoma in the mandible associated with minor trauma: a case report. Journal of medical case reports, 16(1), 8.
Xia, J. J., Phillips, C. V., Gateno, J., Teichgraeber, J. F., Christensen, A. M., Gliddon, M. J., Lemoine, J. J., & Liebschner, M. A. (2006). Cost-effectiveness analysis for computer-aided surgical simulation in complex cranio- maxillofacial surgery. Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 64(12), 1780–1784.
Yamasoba, T., Harada, T., Okuno, T., & Nomura, Y. (1990). Osteoma of the middle ear. Report of a case. Archives of otolaryngology--head & neck surgery, 116(10), 1214–1216.
Zeller, A. N., Neuhaus, M. T., Fresenborg, S., Zimmerer, R. M., Jehn, P., Spalthoff, S., Gellrich, N. C., & Dittmann, J. A. (2021). Accurate and cost-effective mandibular biomodels: a standardized evaluation of 3D- Printing via fused layer deposition modeling on soluble support structures. Journal of Stomatology, Oral and Maxillofacial Surgery, 122(4), 355–360.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jadson Lisboa da Silva; Vinícius Matheus Szydloski; Edela Puricelli; Deise Ponzoni
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
