Study of vibration in a Formula SAE vehicle through simulation

Authors

DOI:

https://doi.org/10.33448/rsd-v13i9.46955

Keywords:

Formula SAE; Mechanical vibrations; Modal analysis; Computational simulation; Engineering teaching.

Abstract

This article aims to analyze the influence of the Yamaha XT660R engine vibrations on an FSAE tubular chassis using computational simulations. In these simulations, finite element software was used for modal analysis, identifying the critical vibration modes of the chassis and its natural frequencies. The results indicate vibration modes that may coincide with the operational frequencies of the engine, highlighting the need for structural modifications to mitigate potential failures. This study not only provides a theoretical basis for future experimental validations but also offers practical recommendations to improve the design of competition vehicles, contributing to safety and performance.

References

Adams, D. E. (2010). Mechanical Vibrations. Springer.

Agarwal, S., Awasthi, P., Saatyaki, T., Kushwaha, M., & Jaiswal, V. (2020). Design & analysis of spaceframe chassis for FSAE vehicle. International Journal of Engineering Research & Technology (IJERT), 9(03), 559-561.

Bathe, K. J. (2014). Finite Element Procedures. Pearson Education.

Chittaliya, S., Anghan, H., & Vaghani, U. (2021). A methodological study to analyze and design the car chassis. International Journal for Research in Applied Science & Engineering Technology (IJRASET), 9(12), 390-394. https://doi.org/10.22214/ijraset.2021.39306.

Eakambaram, A., Baskara Sethupathi, P., Saibalaji, M. A., & Baskar, A. (2021). Experimental analysis and validation of torsional stiffness of a tubular space frame chassis. Materials Today: Proceedings, 46, 7719-7727. https://doi.org/10.1016/j.matpr.2021.02.238.

Itu, C., & Sorin, V. (2023). The effect of vibrations from racing cars on the human body in FORMULA STUDENT races. Applied Sciences, 13(22), 12150. https://doi.org/10.3390/app132212150.

Jogi, N. G., Take, A. P., Asolkar, Y., & Aftab, S. M. (2014). Review work on analysis of F1 car frame using ANSYS. IJRET: International Journal of Research in Engineering and Technology, 3(4), eISSN: 2319-1163, pISSN: 2321-7308.

Kelly, S. G. (2017). Vibrações mecânicas: teoria e aplicações. Cengage.

Koche, J. C. (2011). Fundamentos de metodologia científica. Vozes.

Moaveni, S. (2020). Finite element analysis: Theory and application with ANSYS (5th ed.). Pearson.

Mohamad, M. L., Rahman, M. T. A., Khan, S. F., Basha, M. H., Adom, A. H., & Hashim, M. S. M. (2017). Design and static structural analysis of a race car chassis for Formula Society of Automotive Engineers (FSAE) event. Journal of Physics: Conference Series, 908, 012042. https://doi.org/10.1088/1742-6596/908/1/012042.

Pereira A. S., Shitsuka, D. M., Parreira, F. J. & Shitsuka, R. (2018). Metodologia da pesquisa científica. [free e-book]. Ed. UAB/NTE/UFSM.

Rajappan, R., & Vivekanandhan, M. (2013). Static and modal analysis of chassis by using FEA. The International Journal of Engineering and Science (IJES), 2(2), 63-73. ISSN: 2319-1813. ISBN: 2319-1805.

Rao, S. (2008). Vibrações Mecânicas. Pearson Education do Brasil.

Reddy, J. N. (2014). Uma Introdução à Análise Não Linear de Elementos Finitos. Oxford University Press.

SAE Brasil. (2024). Fórmula SAE Brasil. SAE Brasil. https://saebrasil.org.br/programas-estudantis/formula-sae-brasil/.

Sani, M. S. M., Rahman, M. M., Noor, M. M., Kadirgama, K., & Izham, M. H. N. (2011). Identification of dynamics modal parameter for car chassis. IOP Conference Series: Materials Science and Engineering, 17, 012038. https://doi.org/10.1088/1757-899X/17/1/012038.

Santos, H. R., & Chaves, A. R. (2021). Análise estrutural por elementos finitos do chassi de um veículo Baja SAE. Revista Científica Multidisciplinar Núcleo do Conhecimento, 06(12), 153-180. https://www.nucleodoconhecimento.com.br/engenharia-mecanica/veiculo-baja-sae.

Schweighardt, A., Vehovszky, B., & Feszty, D. (2020). Modal analysis of the tubular space frame of a Formula Student race car. Manufacturing Technology, 20(1), 84-91. https://doi.org/10.21062/mft.2020.013.

Singh, R. P. (2010). Structural performance analysis of Formula SAE car. Jurnal Mekanikal, 31, 46-61.

Steward, D. (2014). Race car design. London: Palgrave.

Venâncio, N. F. (2013). Projeto do chassis de uma viatura fórmula (Dissertação de mestrado, Faculdade de Engenharia da Universidade do Porto). Porto, Portugal.

Vinjanampati, P., & Veerarapu, S. (2022). Methodology for performing submodel analysis for random vibration problems using modal analysis results. SAE Technical Paper 2022-26-0012. https://doi.org/10.4271/2022-26-0012

Waslawich, R. (2021). Metodologia de Pesquisa para Ciência da Computação. (3.ed.). Editora: GEN LTC.

Yamaha. (2003). XT660R(S)/XT660X(S) service manual. MBK Industrie.

Zienkiewicz, O. C., Taylor, R. L., & Zhu, J. Z. (2005). Finite Element Method - Its Basis and Fundamentals. Elsevier Butterworth-Heinemann.

Published

27/09/2024

How to Cite

GALVÃO, C. V. A. .; BRITO, H. M. B. F. . Study of vibration in a Formula SAE vehicle through simulation. Research, Society and Development, [S. l.], v. 13, n. 9, p. e11213946955, 2024. DOI: 10.33448/rsd-v13i9.46955. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/46955. Acesso em: 3 dec. 2024.

Issue

Section

Engineerings