Comparison of the resistance of intrarradicular pin of glass fiber with experimental pin connected by CAD/CAM technology
DOI:
https://doi.org/10.33448/rsd-v9i7.4905Keywords:
Dental pins; Dental prosthesis; CAD.Abstract
Objective: The aim of the present study was to compare the fracture strength of endodontically restored teeth with glass-fiber pin and experimental pin of computer-aided design / computer-aided manufacturing (CAD / CAM). Methodology: A total of 20 bovine incisors with sectioned crowns and roots were prepared with 15mm length were randomly divided into two groups (n = 10): G1 - pin fiber glass (control) and G2 - pin machined (experimental). In both groups, the samples had their root canals treated endodontically. The roots were included in acrylic resin, the pins cemented with dual resin cement and subsequently subjected to the compression fracture strength test at a speed of 0.05 mm / min under a 45 ° angle in a universal test machine until the fracture. The values of fracture resistance were submitted to Student's t-test with the SPSS program with a significance level of 5%. Results: According to the tests, the results required strength at fracture was lower in the pre-fabricated custom (48.2kgf) fiber pin group than the group of pins milled by the CAD / CAM system (56.9kgf), however no there was a statistical difference between them (p = 0.26). With a mean SD ± 14.6 for the first and ± 19.0 for the second group. Conclusion: Fiber pins developed by CAD / CAM technology may appear as a viable alternative for intraradicular restorations of endodontically treated elements, since there was no statistical difference in fracture resistance with pre-fabricated pins.
References
Albuquerque, R., De Abreu Polleto, L.T., Fontana, R. H. B. T. S., & Cimini, C.A. (2003). Stress analysis of an upper central incisor restored with different posts. Journal of Oral Rehabilitation, 30(9): 936-43.
Ambica, K., Mahendran, K., Talwar, S., Verma, M., Padmini, G., & Periasamy, R. (2013). Comparative evaluation of fracture resistance under static and fatigue loading of endodontically treated teeth restored with carbon fiber posts, glass fiber posts, and an experimental dentin post system: an in vitro study. Journal of endodontics, 39(1): 96-100.
Barcelos, L. M. (2016). Efeito do número de pinos de fibra de vidro na resistência à fratura, deformação estrutural e distribuição de tensão em molares tratados endodonticamente Dissertação de Mestrado, Faculdade de Odontologia da Universidade Federal de Uberlândia, Uberlândia, MG, Brasil.
Cardoso, I. O. (2018). Influência de diferentes aparelhos fotoativadores LED sem fio e o nível de bateria nas propriedades da resina composta.Dissertação de Mestrado, Faculdade de Odontologia da Universidade Federal de Uberlândia, Uberlândia, MG, Brasil.
Cesero, L. (2017). Influência da adição de nanopartículas de sílica nas propriedades mecânicas de gessos odontológico. Tese de Doutorado. Faculdade de Odontologia da Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, RS, Brasil.
Clavijo, E. M. A. (2013). Avaliação in vitro da resistência à fratura de raízes dentais fragilizadas reabilitadas com núcleos de preenchimento associados a pinos de fibra de vidro. Dissertação de Mestrado, Faculdade de Odontologia de Piracicaba da Universidade Estadual de Campinas, Piracicaba, SP, Brasil.
Forberger, N., & Göhring, T. N. (2008). Influence of the type of post and core on in vitro marginal continuity, fracture resistance, and fracture mode of Lithia disilicate-based all-ceramic crowns. The Jounal of Prosthetic Dentistry, 100: 264-273.
Hayashi, M., T. Akahashi, Y., Imazato, S., & Ebisu, S. (2006) Fracture resistance of pulpless teeth restored with post–cores and crowns. Dental Materials. 22: 477–85.
Hayashi, M. (2008). Static and fatigue fracture resistance of pulpless teeth restored with postcores. Dental Materials, 10: 01-09.
Jovanovski, S., Popovski, J., Dakskobler, A., Marion, L., & Jevnikar, P. (2017). The influence of crown ferrule on fracture resistance of endodontically treated maxillary central incisors. Balkan Journal of Dental Medicine, 21(1): 44-49.
Lemos, C. A., Almeida D. A. F., Batista, V. E. S., Mello, C. C., Verri, F. R., Pellizzer, E. P., et al. (2016). Influence of diameter and intraradicular post in the stress distribution. Finite element analysis. Revista de Odontologia da UNESP, 45(3): 171-176.
Malferrari, S., Monaco, C., & Scotti, R. (2003). Clinical evolution of teeth restored with quatzo fiber-reinforced epoxy resin posts. The International Journal of Prosthodontic, 16: 39-44.
Naves, L. Z., Silva, G. R., & Soares, C. J. (2007). Influência da velocidade de aplicação de carga na resistência e modo de fratura de pré-molares superiores humanos. Horizonte Científico, 1(1).
Nealon, F. H. (1952). Acrylic restorations by the operative nonpressure procedure. Journal of Prosthetic Dentistry, 2(4): 513-527.
Pereira J., Daroz, L. G. D., & Xible, A. A. (2018). Efeito da técnica de inserção na resistência mecânica de dois cimentos de ionômero de vidro de alta viscosidade. Revista Brasileira de Pesquisa em Saúde, 20(1): 79-84.
Prado, M. A. A., Kohl, J. C. M., Nogueira, R. D., & Geraldo-Martins, V. (2014). Retentores intrarradiculares: revisão da literatura. Journal of Health Sciences, 16(1).
Qualtrough, A. J. E., & Mannocci, F. (2003). Tooth-colored post systems: a review. Operative Dentistry, 28: 86–91.
Ruschel, G. H., Gomes, E. A., Silva-Sousa, Y. T., Pinelli, R. G. P., Sousa-Neto, M. D., & Pereira, G. K. R., et al. (2018). Mechanical properties and superficial characterization of a milled CAD-CAM glass fiber post. Journal of the mechanical behavior of biomedical materials, 82: 187-192.
Santos-Filho, P. C., Veríssimo, C., Soares, P. V., Saltarelo, R. C.,Soares, C. J., & Martins, L. R. M. (2014). Influence of ferrule, post system, and length on biomechanical behavior of endodontically treated anterior teeth. Journal of endodontics, 40(1): 119-123.
Soares, C. J., Valdivia, A. D. C. M., Silva, G. R., Santana, F. R., & Menezes, M. S. (2012) Longitudinal clinical evaluation of post systems: a literature review. Brazilian dental jornal, 23(2): 135-740.
Soares, C. J., Pizi, E. C. G., Fonseca, R. B., & Martins, L. R. M. (2005). Influence of root embedment material and periodontal ligament simulation on fracture resistance tests. Brazilian Oral Research, 19(1): 11-16.
Wandscher, V. F., Bergoli, C. D., Oliveira, A. F., Kaizer, O. B., Borges, A. L. S., & Limberguer, I. F., et al. (2015). Fatigue surviving, fracture resistance, shear stress and finite element analysis of glass fiber posts with different diameters. Journal of the mechanical behavior of biomedical materials, 43: 69-77.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
