Clinical applicability of indirect resins: a literature review

Authors

DOI:

https://doi.org/10.33448/rsd-v9i8.6286

Keywords:

Polymerization; Dental Restoration; Permanent; Dentistry; Operative; Inlays; Self-Curing of Dental Resins.

Abstract

Introduction: Indirect composites, or ceromers, have a better resistance, a greater increase in the conversion of monomers to polymers due to the possibility of complementary polymerization, better finishing and polishing, reduction of problems related to polymerization shrinkage when compared to direct composite resins. However, doubts still exist regarding the use, indication, and longevity of ceromers. Objective: The aim of this study was to conduct a literature review in order to analyze the existing scientific evidence on indirect composites. Method: Scientific articles in Portuguese and English published in the last 20 years were used, in addition to reference articles on the topic. The databases for consultation were Medical Publications (PUBMED), Scientific Electronic Library Online (SCIELO) and complementary books. Conclusion: According to the bibliographic survey, the indirect composite resins have characteristics that indicate to be a good restorative option, and are indicated for indirect restorations, such as total crowns, Class II or Class V cavities, aesthetic area and mainly in onlay/inlay restorations.

References

Almeida, L. de, Santin, D. C., Maran, B. M., Naufel, F. S., & Schmitt, V. L. (2019). Avaliação do manchamento e da rugosidade superficial de materiais restauradores diretos após diferentes sistemas de polimento: estudo in vitro. Revista de Odontologia Da UNESP, 48, 1–10. https://doi.org/10.1590/1807-2577.09618

Angeletaki, F., Gkogkos, A., Papazoglou, E., & Kloukos, D. (2016). Direct versus indirect inlay/onlay composite restorations in posterior teeth. A systematic review and meta-analysis. Journal of Dentistry, 53, 12–21. https://doi.org/10.1016/j.jdent.2016.07.011

Azeem, R. A., & Sureshbabu, N. M. (2018). Clinical performance of direct versus indirect composite restorations in posterior teeth: A systematic review. Journal of Conservative Dentistry : JCD, 21(1), 2–9. https://doi.org/10.4103/JCD.JCD_213_16

Baratieri, L. N., & Monteiro Junior, S. (2001). Odontologia restauradora - Fundamentos e Possibilidades.

Barone, A., Derchi, G., Rossi, A., Marconcini, S., & Covani, U. (2008). Longitudinal clinical evaluation of bonded compositive inlays: A 3-year study. Journal of Oral & Maxillofacial Implants, 39(1), 65–71.

Bertolo, M. V. L., Sinhoreti, M. A. C., Rontani, J. P., Albuquerque, P. P. A. C. de, & Schneider, L. F. J. (2018). O uso do gel de glicerina melhora a estabilidade de cor de resinas compostas? Revista de Odontologia Da UNESP, 47(4), 256–260. https://doi.org/10.1590/1807-2577.07618

Bottino, M. A. (2000). Estética em reabilitação oral: metal free (Editora Artes Médicas, ed.). São Paulo.

Cambruzzi, C., & Cunha, F. (2003). Avaliacao da microinfiltração marginal na cimentacao de inlays de resina composta: estudo in vitro. Stomatos, 9(16), 10–15.

Caneppele, T. M. F., & Bresciani, E. (2016). Resinas bulk-fill - O estado da arte. Revista Da Associacao Paulista de Cirurgioes

Dentistas, 70(3), 242–248.

Cardoso, R., Cardoso, R., Gomes, M., Guimarães, R., Menezes Filho, P., & Silva, C. (2012). Onlay com resina composta direta: Relato de caso Clínico. Odontologia Clínico-Científica (Online), 11(3), 259–264.

Ferracane, J. L., & Condon, J. R. (1992). Post-cure heat treatments for composites: properties and fractography. Dental Materials, 8(5), 290–295. https://doi.org/10.1016/0109-5641(92)90102-I

Ferracane, Jack L. (2011). Resin composite - State of the art. Dental Materials, 27(1), 29–38. https://doi.org/10.1016/j.dental.2010.10.020

Galvão, A. P., Miura, C. A. S., & Aras, W. M. D. F. (2012). Restauração Indireta De Cerômero: Uma Alternativa Estética Viável? Revista Bahiana de Odontologia, 3(1). https://doi.org/10.17267/2238-2720revbahianaodonto.v3i1.33

Goyatá, F. dos R., Oliveira, R. S., Ferreira, T. F. dos R. Z., Rangel, A. C. C., & Gilson, J. G. da R. (2008). Avaliação flexural de uma resina composta microhíbrida reforçada por pinos de fibra de vidro. Int J Dent, 7(1), 2–7.

Goyatá, F., Galvão, Y., FV, L., & Coelho, L. (2012). Reabilitação funcional e estética com fragmentos cerâmicos em dentes fraturados. Clín Int j Braz Dent, 8(4), 422–429.

Grazioli, G., Francia, A., Cuevas-Suárez, C. E., Zanchi, C. H., & De

Moraes, R. R. (2019). Simple and low-cost thermal treatments on direct resin composites for indirect use. Brazilian Dental Journal, 30(3), 279–284. https://doi.org/10.1590/0103-6440201902473

Hirata, R., Dentística, E., Dentística, E., Abo-pr, E., Ufpr, G., & Yao, E. (1998). De Resinas Compostas Laboratoriais - Quando E Como Usar Clinical Alternative of Laboratory Composite Resin. Brasileiro de Clinica y Estetica Em Odontologia, 4, 21. Retrieved from http://www.ronaldohirata.com.br/wp-content/uploads/2012/07/jbc19.pdf

Huth, K. C., Chen, H. Y., Mehl, A., Hickel, R., & Manhart, J. (2011).

Clinical study of indirect composite resin inlays in posterior stress-bearing cavities placed by dental students: Results after 4 years. Journal of Dentistry, 39(7), 478–488. https://doi.org/10.1016/j.jdent.2011.04.005

Imai, H., Koizumi, H., Sasaki, K., & Matsumura, H. (2013). The influence of polymerization conditions on color stability of three indirect composite materials. Journal of Oral Science, 55(1), 51–55. https://doi.org/10.2334/josnusd.55.51

Kassem, A. S., Atta, O., & El-Mowafy, O. (2012). Fatigue Resistance and Microleakage of CAD/CAM Ceramic and Composite Molar Crowns. Journal of Prosthodontics, 21(1), 28–32. https://doi.org/10.1111/j.1532-849X.2011.00773.x

Koch, M. J., & García-Godoy, F. (2000). The clinical performance of laboratory-fabricated crowns placed on first permanent molars with developmental defects. Journal of the American Dental Association (1939), 131(9), 1285–1290.

https://doi.org/10.14219/jada.archive.2000.0382

Kükrer, D., Gemalmaz, D., Kuybulu, E. O., & Bozkurt, F. O. (2004). A prospective clinical study of ceromer inlays: results up to 53 months. The International Journal of Prosthodontics, 17(1), 17–23.

Lange, R.-T., & Pfeiffer, P. (2009). Clinical evaluation of ceramic inlays compared to composite restorations. Operative Dentistry, 34(3), 263–272. https://doi.org/10.2341/08-95

Leinfelder, K. F. (1997). New developments in resin restorative systems. Journal of the American Dental Association, 128(5), 573–581. https://doi.org/10.14219/jada.archive.1997.0256

Léon, B., Xisto, E., Aras, W., Silva, E., Moinhos, C., & Queiroz, P. (2019). Análise comparativa da resistência flexural de duas resinas indiretas. Revista Da Faculdade de Odontologia de Porto Alegre, 60(1), 46–51. https://doi.org/10.22456/2177-0018.68465

Manhart, J., Chen, H., Mehl, A., & Hickel, R. (2010). Clinical study of indirect compositive resin inlays in posterior stress-bearing preparations placed by dental students: results after 6 months and 1, 2, and 3 years. Quintessence International, 41(5), 399–410.

Miara, P. (1998). Aesthetic guidelines for second-generation indirect inlay and onlay composite restorations. Practical Periodontics and Aesthetic Dentistry : PPAD, 10(4), 423–431; quiz

Nandini, S. (2010). Indirect resin composites. Journal of Conservative Dentistry : JCD, 13(4), 184–194. https://doi.org/10.4103/0972-0707.73377

Nguyen, J. F., Migonney, V., Ruse, N. D., & Sadoun, M. (2012). Resin composite blocks via high-pressure high-temperature polymerization. Dental Materials, 28(5), 529–534. https://doi.org/10.1016/j.dental.2011.12.003

Ohlmann, B., Dreyhaupt, J., Schmitter, M., Gabbert, O., Hassel, A., & Rammelsberg, P. (2006). Clinical performance of posterior metal-free polymer crowns with and without fiber reinforcement: One-year results of a randomised clinical trial. Journal of Dentistry, 34(10), 757–762. https://doi.org/https://doi.org/10.1016/j.jdent.2006.02.001

Oliveira, D. C. R. S. de, Favarão, J., Souza-Júnior, E. J., Dobson, A. L., Hirata, R., Puppin-Rontani, R. M., & Sinhoreti, M. A. C. (2016). Influência do método de pós-cura na eficiência da cura e rugosidade de resinas compostas diretas em restaurações indiretas. Journal of Clinical Dentistry and Research, 13(3), 84–89. https://doi.org/10.14436/2447-911x.13.3.084-089.oar

Peutzfeldt, A. (2001). A indirect resin and ceramic systems. Operative Dentistry, 200, 1153–1176.

Rammelsberg, P., Spiegl, K., Eickemeyer, G., & Schmitter, M. (2005). Clinical performance of metal-free polymer crowns after 3 years in service. Journal of Dentistry, 33(6), 517–523. https://doi.org/10.1016/j.jdent.2004.11.012

Ritter, A. V, Fahl, N., Vargas, M., & Maia, R. R. (2017). The Direct-Indirect Technique for Composite Restorations Revisited. Compendium of Continuing Education in Dentistry (Jamesburg, N.J. : 1995), 38(6), e9–e12. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/28586234

Ruse, N. D., & Sadoun, M. J. (2014). Resin-composite blocks for dental CAD/CAM applications. Journal of Dental Research, 93(12), 1232–1234. https://doi.org/10.1177/0022034514553976

Shibayama, R., Araujo, C. A. M., & Barros, K. V. de. (2017). Restaurações indiretas inlay-onlay em resina nanocerâmica com a tecnologia CAD/CAM: relato de caso. Rev. Odontol. Arac, 38(3), 15–20.

Silva, F., Silva, E., Januário, M., Vasconcelos, M., & Vasconcelos, R. (2017). Técnicas para reduzir os efeitos da contração de polimerização das resinas compostas fotoativasas. Salusvita, 36(1), 187–203.

Soares, C. J., Faria-E-Silva, A. L., Rodrigues, M. de P., Fernandes Vilela, A. B., Pfeifer, C. S., Tantbirojn, D., & Versluis, A. (2017). Polymerization shrinkage stress of composite resins and resin cements - What do we need to know? Brazilian Oral Research, 31, 49–63. https://doi.org/10.1590/1807-3107BOR-2017.vol31.0062

Stawarczyk, B., Egli, R., Roos, M., Özcan, M., & Hämmerle, C. H. F. (2011). The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins. Journal of Prosthetic Dentistry, 106(6), 386–398. https://doi.org/10.1016/S0022-3913(11)60153-4

Veiga, A. M. A., Cunha, A. C., Ferreira, D. M. T. P., da Silva Fidalgo, T. K., Chianca, T. K., Reis, K. R., & Maia, L. C. (2016). Longevity of direct and indirect resin composite restorations in permanent posterior teeth: A systematic review and meta-analysis. Journal of Dentistry, 54, 1–12. https://doi.org/10.1016/j.jdent.2016.08.003

Downloads

Published

01/08/2020

How to Cite

RIBEIRO, A. de O. P.; BARBOSA, I. F.; PEDROSA, L. M.; CÂMARA, J. V. F.; PIEROTE, J. J. A.; PEREIRA, G. D. da S.; SILVA, I. B. da . Clinical applicability of indirect resins: a literature review. Research, Society and Development, [S. l.], v. 9, n. 8, p. e867986286, 2020. DOI: 10.33448/rsd-v9i8.6286. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/6286. Acesso em: 8 jul. 2024.

Issue

Vol. 9 No. 8

Section

Review Article

License

Copyright (c) 2020 Amanda de Oliveira Pinto Ribeiro, Amanda de Oliveira Pinto Ribeiro, Isabel Ferreira Barbosa, Isabel Ferreira Barbosa, Letícia Meinberg Pedrosa, Letícia Meinberg Pedrosa, João Victor Frazão Câmara, Josué Junior Araujo Pierote, Josué Junior Araujo Pierote, Gisele Damiana da Silveira Pereira, Gisele Damiana da Silveira Pereira

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.