Study of the influence of red ceramic residue, as a partial substitute for the binder or aggregate, in mixed mortars for coating

Authors

DOI:

https://doi.org/10.33448/rsd-v9i11.10507

Keywords:

Mixed mortars; Sustainability; Technology of architecture; Red ceramic residue.

Abstract

In order to promote a global network of sustainable economic development for developing countries, several countries produced a document with direct guidelines for more sustainable industrial development during the United Nations Conference on Environment and Development in 1992, with emphasis on waste reduction and reuse of by-products. Since the industries that produce ceramic materials are an important branch of the civil construction production chain, it also stands out for being a major generator of waste, the so-called red ceramic residue (RCR). Seeking a more sustainable destination of these by-products, this work aimed to evaluate some possibilities of using the RCR, from the manufacture of sealing bricks, as a substitute for fine aggregate or agglomerate, in mixed mortars with 1: 2: 8 features and 1: 2: 9. The application was evaluated for the mechanical and physical performance of mortars, with contents of 5% and 10% of cement replacement by RCR, and 10%, 15% and 20% of aggregate replacement. The performances of 1: 2: 8 mortars were superior to the 1: 2: 9 traces, both mechanically and in relation to capillary absorption. A different fact occurred when the absorption by immersion and voids index were tested, where the two traits had similar behaviors. The substitutions in the aggregate affected the mortars more mechanically compared to the substitution in the binder, given the greater porosity of the RCR. The substitutions in the binder made the mortars present performances closer to the reference strokes.

Author Biographies

Francielli Priebbernow Pinz, Federal University of Pelotas

Graduated in Architecture and Urbanism (2017) and Master in Architecture and Urbanism (2019) from the Federal University of Pelotas. She worked as a substitute professor at Instituto Federa Sul-Rio-Grandense (2017-2019) and currently works as an Architect in Optimizes Architecture. Has experience in Architecture and Urbanism, working on the following themes: RCV, mortars, Waste recycling, Architecture Technology.

Charlei Marcelo Paliga, Federal University of Pelotas

He has a degree in Civil Engineering from the Federal University of Rio Grande (2000), a master's degree in Ocean Engineering from the Federal University of Rio Grande (2003) and a PhD in Civil Engineering from the Federal University of Rio Grande do Sul (2007). He is currently associate professor 3 at the Federal University of Pelotas. Has experience in the area of ​​Civil Engineering, acting mainly on the following themes: design of reinforced concrete structures, finite element method, recovery / reinforcement of concrete structures with fiber reinforced polymers, structural reliability.

Ariela da Silva Torres, Universidade Federal de Pelotas

Graduated in Civil Engineering from Universidade Católica de Pelotas (2003), Master in Civil Engineering with emphasis on structure - PPGEC / UFRGS (2006) and PhD in Civil Engineering with emphasis on structures - PPGEC / UFRGS (2011). Associate Professor 1 at the Faculty of Architecture and Urbanism at UFPel. She works at PPG in Architecture and Urbanism (permanent professor) in the research line: Technology and Conservation of the Built Environment. Leader of the Research Group on Pathologies and Materials (NEPAMAT). Has experience in the area of ​​Civil Engineering, acting mainly on the following themes: design of reinforced concrete structures, Construction Pathology, use of waste in civil construction.

References

Agência Brasileira de Desenvolvimento Industrial. (2016). Estudo Técnico Setorial da Cerâmica Vermelha: Subsídios para a elaboração do plano de desenvolvimento Sustentável da cadeia produtivo de cerâmica vermelha. Brasília: Invetta.

Araújo, A. R. (2017). Influência da utilização do resíduo de cerâmica vermelha nas propriedades de argamassas mistas (Dissertação de mestrado). Programa de Pós-Graduação em Engenharia de Civil, Universidade Federal de Rio Grande do Norte, Natal, RN, Brasil.

ABNT NBR 5751, de 24 de agosto de 2015. Materiais pozolânicos – Determinação da atividade pozolânica com cal aos 7 dias. Rio de Janeiro: Associação Brasileira de Normas Técnicas.

ABNT NBR 5752, de 27 de junho de 2014. Materiais pozolânicos – Determinação da atividade pozolânica com cimento Portland aos 28 dias. Rio de Janeiro: Associação Brasileira de Normas Técnicas.

ABNT NBR 13281, de 30 de setembro de 2005. Argamassa para assentamento e revestimento de paredes e tetos - Requisitos. Rio de Janeiro: Associação Brasileira de Normas Técnicas.

ABNT NBR 7215, de 30 de dezembro de 1996. Cimento Portland – Determinação da resistência à compressão. Rio de Janeiro: Associação Brasileira de Normas Técnicas.

ABNT NBR 7200, de 30 de agosto de 1998. Execução de revestimentos de paredes e tetos de argamassas inorgânicas. Rio de Janeiro: Associação Brasileira de Normas Técnicas.

ABNT NBR 12653, de 24 de julho de 2014. Materiais pozolânicos – Requisitos. Rio de Janeiro: Associação Brasileira de Normas Técnicas.

Associação Nacional da Indústria Cerâmica. (2014). Dados oficiais. Disponível em: http://anicer.com.br/setor/dados-oficiais/. Acesso em: 05/04/18.

Cabrera, F. G. C, Soberón, J. M. G, Sánchez, J. L. A, Rea, S. P. A., & Higuera, R. C. (2015). Mechanical properties of mortar containig recycled ceramic as fine aggregate replacement. Revista de la Construcción, 14(3), 22-29.

Caraseck, H., Girardi, A. C. C., Araújo, R. C., Angelim, R., & Cascudo, O. (2018). Estudo e avaliação de agregados reciclados de resíduo de construção e demolição para argamassas de assentamento e revestimento. Revista Cerâmica, 64 (370).

Castro, A. L., Santos, R. F. C., Gonçalves, K. M., & Quaioni, V. A. (2017). Caracterização de cimento compostos com resíduo da indústria da cerâmica vermelha. Revista Cerâmica, 63 (365).

Jiménez, J. R., Ayuso, J., Lópes, M., Fernández, J. M., & Brito, J. (2013). Use os fine recycled aggregates from ceramic waste in masonry mortar manufacturing. Construction and Building Materials, 40, 679-690.

Medeiros, M. H. F., Souza, D. J., Filho, J. H., Adorno, C. S., Quarcioni, V.A., & Pereira, E. (2016). Resíduo de cerâmica vermelha e fíler calcário em compósito de cimento Portland: efeito no ataque por sulfatos e na reação álcali-sílica. Revista Matéria, 21(02), 282-200.

Morais, M. H. L., Souza, W.M., & Ribeiro, A. J. A. (2020). Use of red ceramic waste as fine aggregate in concretes. Research, Society and Development, 9(7), 1-17.

Oliveira, E. M., Oliveira, C. M., Petereson, M., Pelisser, F., & Antunes, E. G. P. (2019). Análise da resistência à compressão e tração de argamassa com adição de resíduo de cerâmica vermelha. Revista Matéria, 24 (2).

Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia de pesquisa científica. Recuperado de https://repositorio.ufsm.br/bitstream/handle/1/1 5824/Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1

Qadir, S. S. (2015). Strength and behavior of self compacting concrete with crushed ceramic tiles as partial replacement for coarse aggregate to elevated temperature. International Journal of Engeneering Technology, Management and Applied Science, 3(04), 278-286.

Samandi, M., Hussin, M.W., Lee, H. S., Sam, A. R. M., Ismail, M. A., Lim, N. H. A. S., Khalid, N. H. A. (2015). Properties of mortar containing ceramic powder waste as cement replacment. Jurnal Teknologi, 77 (12), 93-97.

Santos, R. F. C., Castro, A. L., Gonçalves, K. M. (2018). Produção de concreto autoadensável incorporado com resíduo da indústria de cerâmica vermelha. Revista Matéria, 23(3), 1-15.

Schackow, A., Stringari, D., Senff, L., Correia, S. L., & Segadães, A. M. (2015). Influence of fired clay brick waste additions on the durability of mortars. Cement and Concrete Composites, 62, 82-89.

Silva, J., Brito, J., & Veiga, R. (2010). Recycled red-clay ceramic construction and demolition waste for mortar productions. Journal of Materials in Civil Engeneering, 22(3), 236-244.

Srujhana, P., Menon, R. J., Basutkar, S. M., & Devi, M. V. R. (2018). Demolished brick masonry as a replacement of river sand in cement and cement lime mortar. AIP Conference Proceedings, 2039.

Yagizi, W. (2013). A técnica de edificar (13a ed.). São Paulo: Pini.

Downloads

Published

06/12/2020

How to Cite

PINZ, F. P. .; PALIGA, C. M.; TORRES, A. da S. Study of the influence of red ceramic residue, as a partial substitute for the binder or aggregate, in mixed mortars for coating. Research, Society and Development, [S. l.], v. 9, n. 11, p. e90191110507, 2020. DOI: 10.33448/rsd-v9i11.10507. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/10507. Acesso em: 22 nov. 2024.

Issue

Vol. 9 No. 11

Section

Engineerings

License

Copyright (c) 2020 Francielli Priebbernow Pinz; Charlei Marcelo Paliga; Ariela da Silva Torres

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.