Evaluation of the shaping ability of two reciprocating systems: Reciproc Blue x V-File
DOI:
https://doi.org/10.33448/rsd-v10i15.22870Keywords:
Root canals; Nickel titanium; Canal preparation.Abstract
Introduction: Cleaning and shaping are extremely important steps in the instrumentation of root canals so that endodontic treatment can be carried out with excellence. With the aim of optimizing working time and presenting a high-quality material, NiTi (nickel-titanium) files have been developed to ensure successful endodontic treatment. Acrylic blocks are used to obtain a pattern of simulated canals. Objective: The aim of this study was to compare Reciproc Blue and V-File files after their second use. Methods: 40 acrylic blocks were used, divided into four groups (n=10) according to the number of times each instrument was used: REC1, REC2, VF1 and VF2. Prior to root canal preparation, the patency of the root canal was checked with a #10 K file. Pre- and postoperative photographic images were created in image processing software (Adobe Photoshop CS5.1) for later superimposition and analysis. Statistical analysis was performed using the t-test and Mann Whitney test. Results: At all points studied, the Reciproc Blue instrument removed more resin from the outside at the beginning of the curve (p < 0.05). There were no significant differences at any of the points in terms of transport distance from the canal. The Reciproc Blue instrument had wider and less conservative preparations. Conclusion: Both instruments (Reciproc Blue and V-File) are safe for curved canal preparation and provide effective cleaning and shaping. However, the V-File instrument had more conservative preparations.
References
Berutti, E., Chiandussi, G., Paolino, D. S., Scotti, N., Cantatore, G., Castellucci, A., & Pasqualini, D. (2012). Canal shaping with WaveOne Primary reciprocating files and ProTaper system: a comparative study. Journal of endodontics, 38(4), 505-509.
Carvalho, A. de M. de; Silva, M. R. da; Rodrigues, M. A.; Oliveira Junior, E. S. de; Souza, C. C.; Rosas, C. A. P.; Cardoso, R. M.; Limoeiro, A. G. da S. (2021). Evaluation of the cutting ability of two reciprocating instruments (WaveOne Gold e W-file). Research, Society and Development, 10(14), 1-8.
Gambarini, G., Rubini, A. G., Sannino, G., Di Giorgio, F., Piasecki, L., Al-Sudani, D., & Testarelli, L. (2016). Cutting efficiency of nickel–titanium rotary and reciprocating instruments after prolonged use. Odontology, 104(1), 77-81.
Gündoğar, M., & Özyürek, T. (2017). Cyclic fatigue resistance of OneShape, HyFlex EDM, WaveOne Gold, and Reciproc Blue nickel-titanium instruments. Journal of endodontics, 43(7), 1192-1196.
Giuliani, V., Di Nasso, L., Pace, R., & Pagavino, G. (2014). Shaping ability of waveone primary reciprocating files and ProTaper system used in continuous and reciprocating motion. Journal of endodontics, 40(9), 1468-1471.
Haapasalo, M., & Shen, Y. (2013). Evolution of nickel–titanium instruments: from past to future. Endodontic topics, 29(1), 3-17.
Keskin, C., Inan, U., Demiral, M., & Keleş, A. (2017). Cyclic fatigue resistance of Reciproc Blue, Reciproc, and WaveOne Gold reciprocating instruments. Journal of endodontics, 43(8), 1360-1363.
Keskin, C., Demiral, M., & Sarıyılmaz, E. (2018). Comparison of the shaping ability of novel thermally treated reciprocating instruments. Restorative dentistry & endodontics, 43(2).
Lim, Y. J., Park, S. J., Kim, H. C., & Min, K. S. (2013). Comparison of the centering ability of Wave· One and Reciproc nickel-titanium instruments in simulated curved canals. Restorative dentistry & endodontics, 38(1), 21-25.
Maranhão, K. D. M., Santiago, R. D., Conde, M. S. F., & Lamarão, S. M. S. (2008). Análise in vitro da limpeza promovida por duas técnicas de instrumentação. Salusvita, 45-54.
Medeiros, J. M. F., Haddad Filho, M. S., Habitante, S. M., da Rosa, L. C. L., Salum, G., & Almeida, E. T. D. C. (2017). Perda de corte da lima protaper quanto a esterilização e número de uso. Revista de Odontologia da Universidade Cidade de São Paulo, 23(3), 228-237.
Pereira, H. S. C., da Silva, E. J. N. L., & de Souza Coutinho-Filho, T. (2013). Movimento reciprocante em Endodontia: revisão de literatura. Revista Brasileira de Odontologia, 69(2), 246.
Plotino, G., Rubini, A. G., Grande, N. M., Testarelli, L., & Gambarini, G. (2014). Cutting efficiency of Reciproc and WaveOne reciprocating instruments. Journal of Endodontics, 40(8), 1228-1230.
Piazza, G. C., do Amaral Capello, P., Almeida, C. N., Blatt, J. A., & Ferreira, R. (2021). Avaliação do número de canais modelados com limas ProDesign M até sua fratura, simulados em blocos de resina acrílica. Orbis Science, 1(1), 46-56.
Schilder, H. (1974). Cleaning and shaping the root canal. Dent Clin North Am, 18, 269-296.
Silva, M. R., Carvalho, A. M., Oliveira Junior, E.S., Souza, C. C., Rosas, C. P., Cardoso, R. M., Limoeiro, A.G.S. (2021) Estudo In Vitro da limpeza de canais simulados (Wave One Gold x W-File). Research Society and Devolopment, 10(13), 1-8.
Simeão, A. E. S., Silva, M. C. S., Oliveira Junior, E. S., Souza, C. C., Carvalho, A. M., Limoeiro, A. G. (2021) Reciproc Blue x V-File: a study on the performance of two reciprocant instruments after third use. Research Society and Devolopment 10(15), e174101522849.
Walia, H. (1988). An initial investigation of the bending and tortional properties of nitinol root canal files. J Endod, 14, 246-251.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Maria Clara Santos Silva; Anna Elisa Souza Simeão; Caio Cesar Souza; Matheus Almeida Rodrigues; Edeilton Santana de Oliveira Júnior e Bezerra; Adolfo de Matos de Carvalho ; Ana Grasiela da Silva Limoeiro
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
