Shear strength evaluation of self-adhesive versus conventional flow composites resins: a systematic review
DOI:
https://doi.org/10.33448/rsd-v11i2.25576Keywords:
Composite resins; Shear strength; Systematic review.Abstract
Little is known about self-adhesive flowable composite resins since most of the literature mentions conventional flowable composite resins. Therefore, the present work aimed to exclusively review the bonding behavior to enamel and dentin of self-adhesive flowable composite resins compared to conventional flowable composite resin. A literature search was carried out from 2010 to 2021 in the Pubmed database. The search term used was “self-adhering flowable composite”, where 61 complete articles were evaluated and only 11 were selected. Only studies that evaluated the bond strength by the shear or micro shear test of the self-adhesive fluid composite resin applied to the tooth structure were eligible for selection. Based on this systematic review, it is concluded that the self-adhesive flowable resin demonstrated lower bond strength values to enamel and dentin than conventional flowable resin. The combination of the total acid etch adhesive system with self-adhesive fluid resin showed higher bond strength values than the use of self-adhesives alone. The self-adhesive fluid resin obtained bond strength values similar to glass ionomer-based restorative materials.
References
Abdelraouf, R. M., Mohammed, M., & Abdelgawad, F. (2019). Evaluation of Shear-Bond-Strength of Dental Self-Adhering Flowable Resin-Composite versus Total-Etch One to Enamel and Dentin Surfaces: An In-Vitro Study. Open Access Macedonian Journal of Medical Sciences, 7(13), 2162–2166. https://doi.org/10.3889/oamjms.2019.579
Baroudi, K., Silikas, N., & Watts, D. C. (2007). Time-dependent visco-elastic creep and recovery of flowable composites. European Journal of Oral Sciences, 115(6), 517–521. https://doi.org/10.1111/j.1600-0722.2007.00487.x
Bayne, S. C., Thompson, J. Y., Swift, E. J., Stamatiades, P., & Wilkerson, M. (1998). A characterization of first-generation flowable composites. Journal of the American Dental Association (1939), 129(5), 567–577. https://doi.org/10.14219/jada.archive.1998.0274
Bektas, O. O., Eren, D., Akin, E. G., & Akin, H. (2013). Evaluation of a self-adhering flowable composite in terms of micro-shear bond strength and microleakage. Acta Odontologica Scandinavica, 71(3-4), 541–546. https://doi.org/10.3109/00016357.2012.696697
Brueckner, C., Schneider, H., & Haak, R. (2017). Shear Bond Strength and Tooth-Composite Interaction With Self-Adhering Flowable Composites. Operative Dentistry, 42(1), 90–100. https://doi.org/10.2341/15-365-L
Bumrungruan, C., & Sakoolnamarka, R. (2016). Microshear bond strength to dentin of self-adhesive flowable composite compared with total-etch and all-in-one adhesives. Journal of Dental Sciences, 11(4), 449–456. https://doi.org/10.1016/j.jds.2016.08.003
Çelik, E. U., Aka, B., & Yilmaz, F. (2015). Six-month Clinical Evaluation of a Self-adhesive Flowable Composite in Noncarious Cervical Lesions. The Journal of Adhesive Dentistry, 17(4), 361–368. https://doi.org/10.3290/j.jad.a34556
Czasch, P., & Ilie, N. (2013). In vitro comparison of mechanical properties and degree of cure of a self-adhesive and four novel flowable composites. The Journal of Adhesive Dentistry, 15(3), 229–236. https://doi.org/10.3290/j.jad.a29530
Durmuşlar, S., & Ölmez, A. (2017). Microtensile Bond Strength and Failure Modes of Flowable Composites on Primary Dentin with Application of Different Adhesive Strategies. Contemporary Clinical Dentistry, 8(3), 373–379. https://doi.org/10.4103/ccd.ccd_310_17
ElEmbaby, A. E., Slais, M., Alawami, A., Alabbad, M., Alsowyan, M., Hanna, N., & Bahgat, H. (2021). Spectrophotometric Analysis of Different Flowable Restorative Materials. The Journal of Contemporary Dental Practice, 22(2), 111–116.
Eliades, A., Birpou, E., Eliades, T., & Eliades, G. (2013). Self-adhesive restoratives as pit and fissure sealants: A comparative laboratory study. Dental Materials : Official Publication of the Academy of Dental Materials, 29(7), 752–762. https://doi.org/10.1016/j.dental.2013.04.005
Fu, J., Kakuda, S., Pan, F., Hoshika, S., Ting, S., Fukuoka, A., Bao, Y., Ikeda, T., Nakaoki, Y., Selimovic, D., Sano, H., & Sidhu, S. K. (2013). Bonding performance of a newly developed step-less all-in-one system on dentin. Dental Materials Journal, 32(2), 203–211. https://doi.org/10.4012/dmj.2012-204
Garcia, R. N., Silva, C. S., Silva, G. G., Mocellin, G., Ozelame, J., Fracasso, L., Ozelame, M. B., Nascimento, R. F. d., & Gomes., A. C. R. (2014). Bonding performance of a self-adhering flowable composite to indirect restorative materials. Revista Sul-Brasileira De Odontologia, 11(1), 6–12.
Goracci, C., Margvelashvili, M., Giovannetti, A., Vichi, A., & Ferrari, M. (2013). Shear bond strength of orthodontic brackets bonded with a new self-adhering flowable resin composite. Clinical Oral Investigations, 17(2), 609–617. https://doi.org/10.1007/s00784-012-0729-x
Ikeda, I., Otsuki, M., Sadr, A., Nomura, T., Kishikawa, R., & Tagami, J. (2009). Effect of filler content of flowable composites on resin-cavity interface. Dental Materials Journal, 28(6), 679–685. https://doi.org/10.4012/dmj.28.679
Jordehi, A. Y., Shahabi, M. S., & Akbari, A. (2019). Comparison of self-adhering flowable composite microleakage with several types of bonding agent in class V cavity restoration. Dental Research Journal, 16(4), 257–263.
Labella, R., Lambrechts, P., van Meerbeek, B [B.], & Vanherle, G. (1999). Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dental Materials, 15(2), 128–137. https://doi.org/10.1016/S0109-5641(99)00022-6
Miletić, V. (2018). Dental Composite Materials for Direct Restorations. Springer. https://doi.org/10.1007/978-3-319-60961-4
Muñoz, M. A., Luque, I., Hass, V., Reis, A., Loguercio, A. D., & Bombarda, N. H. C. (2013). Immediate bonding properties of universal adhesives to dentine. Journal of Dentistry, 41(5), 404–411. https://doi.org/10.1016/j.jdent.2013.03.001
Naga, A. A. E., Yousef, M., Ramadan, R., Fayez Bahgat, S., & Alshawwa, L. (2015). Does the use of a novel self-adhesive flowable composite reduce nanoleakage? Clinical, Cosmetic and Investigational Dentistry, 7, 55–64. https://doi.org/10.2147/CCIDE.S80462
Oz, F. D., Ergin, E., Cakir, F. Y., & Gurgan, S. (2020). Clinical Evaluation of a Self-Adhering Flowable Resin Composite in Minimally Invasive Class I Cavities: 5-year Results of a Double Blind Randomized, Controlled Clinical Trial. Acta Stomatologica Croatica, 54(1), 10–21. https://doi.org/10.15644/asc54/1/2
Pacifici, E., Chazine, M., Vichi, A., Grandini, S., Goracci, C., & Ferrari, M. (2013). Shear-bond strength of a new self-adhering flowable restorative material to dentin of primary molars. The Journal of Clinical Pediatric Dentistry, 38(2), 149–154. https://doi.org/10.17796/jcpd.38.2.l3q5l3128k2870j7
Peumans, M [M.], Munck, J. de [J.], van Landuyt, K. L., Poitevin, A [A.], Lambrechts, P., & van Meerbeek, B [B.] (2010). Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dental Materials : Official Publication of the Academy of Dental Materials, 26(12), 1176–1184. https://doi.org/10.1016/j.dental.2010.08.190
Poitevin, A [André], Munck, J. de [Jan], van Ende, A., Suyama, Y., Mine, A., Peumans, M [Marleen], & van Meerbeek, B [Bart] (2013). Bonding effectiveness of self-adhesive composites to dentin and enamel. Dental Materials : Official Publication of the Academy of Dental Materials, 29(2), 221–230. https://doi.org/10.1016/j.dental.2012.10.001
Poorzandpoush, K., Shahrabi, M., Heidari, A., & Hosseinipour, Z. S. (2019). Shear Bond Strength of Self-Adhesive Flowable Composite, Conventional Flowable Composite and Resin-Modified Glass Ionomer Cement to Primary Dentin. Frontiers in Dentistry, 16(1), 62–68. https://doi.org/10.18502/fid.v16i1.1111
Poss, S. D. (2010). Utilization of a new self-adhering flowable composite resin. Dentistry Today, 29(4), 104–105.
Sachdeva, P., Goswami, M., & Singh, D. (2016). Comparative evaluation of shear bond strength and nanoleakage of conventional and self-adhering flowable composites to primary teeth dentin. Contemporary Clinical Dentistry, 7(3), 326–331. https://doi.org/10.4103/0976-237X.188549
Salerno, M., Derchi, G., Thorat, S., Ceseracciu, L., Ruffilli, R., & Barone, A. C. (2011). Surface morphology and mechanical properties of new-generation flowable resin composites for dental restoration. Dental Materials : Official Publication of the Academy of Dental Materials, 27(12), 1221–1228. https://doi.org/10.1016/j.dental.2011.08.596
Shafiei, F., & Saadat, M. (2016). Micromorphology and bond strength evaluation of adhesive interface of a self-adhering flowable composite resin-dentin: Effect of surface treatment. Microscopy Research and Technique, 79(5), 403–407. https://doi.org/10.1002/jemt.22643
Tuloglu, N., Sen Tunc, E., Ozer, S., & Bayrak, S. (2014). Shear bond strength of self-adhering flowable composite on dentin with and without application of an adhesive system. Journal of Applied Biomaterials & Functional Materials, 12(2), 97–101. https://doi.org/10.5301/jabfm.5000166
Unterbrink, G. L., & Liebenberg, W. H. (1999). Flowable resin composites as "filled adhesives": Literature review and clinical recommendations. Quintessence International (Berlin, Germany : 1985), 30(4), 249–257.
van Meerbeek, B [Bart], Yoshihara, K [Kumiko], van Landuyt, K., Yoshida, Y [Yasuhiro], & Peumans, M [Marleen] (2020). From Buonocore's Pioneering Acid-Etch Technique to Self-Adhering Restoratives. A Status Perspective of Rapidly Advancing Dental Adhesive Technology. The Journal of Adhesive Dentistry, 22(1), 7–34. https://doi.org/10.3290/j.jad.a43994
Vichi, A., Margvelashvili, M., Goracci, C., Papacchini, F., & Ferrari, M. (2013). Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations. Clinical Oral Investigations, 17(6), 1497–1506. https://doi.org/10.1007/s00784-012-0846-6
Wei, Y., Silikas, N., Zhang, Z., & Watts, D. C. (2011a). Diffusion and concurrent solubility of self-adhering and new resin-matrix composites during water sorption/desorption cycles. Dental Materials : Official Publication of the Academy of Dental Materials, 27(2), 197–205. https://doi.org/10.1016/j.dental.2010.10.014
Wei, Y., Silikas, N., Zhang, Z., & Watts, D. C. (2011b). Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles. Dental Materials : Official Publication of the Academy of Dental Materials, 27(3), 259–266. https://doi.org/10.1016/j.dental.2010.10.015
Yoshida, Y [Y.], Nagakane, K., Fukuda, R., Nakayama, Y., Okazaki, M., Shintani, H., Inoue, S., Tagawa, Y., Suzuki, K., Munck, J. de [J.], & van Meerbeek, B [B.] (2004). Comparative study on adhesive performance of functional monomers. Journal of Dental Research, 83(6), 454–458. https://doi.org/10.1177/154405910408300604
Yoshida, Y [Y.], Yoshihara, K [K.], Nagaoka, N., Hayakawa, S., Torii, Y., Ogawa, T., Osaka, A., & van Meerbeek, B [B.] (2012). Self-assembled Nano-layering at the Adhesive interface. Journal of Dental Research, 91(4), 376–381. https://doi.org/10.1177/0022034512437375
Yuan, H., Li, M., Guo, B., Gao, Y., Liu, H., & Li, J. (2015). Evaluation of Microtensile Bond Strength and Microleakage of a Self-adhering Flowable Composite. The Journal of Adhesive Dentistry, 17(6), 535–543. https://doi.org/10.3290/j.jad.a35253
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Cassia Thaís Iurkiv Zanatta; Stéphane Vanelli da Silva; Stephanie Bonamin; Veridiana Camilotti; Márcio José Mendonça; Julio Katuhide Ueda
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
