The estimation of the cost design of bacteria-based self-healing concrete

Authors

DOI:

https://doi.org/10.33448/rsd-v11i7.29908

Keywords:

Aggregates used in concrete; Bacteria for the regeneration of concrete; Estimative of the design costs of implementing the bioconcrete; Regeneration of concretes.

Abstract

This research aims to estimate the design costs of implementing the bioconcrete samples suitable for structural purposes. The bioconcrete samples were produced by adding specific bacteria, Sporosarcina pasteurii. The specimens were submitted to tests of resistance to axial compression according to ABNT NBR 5739 under water-curing periods of 7, 14, and 28 days. To the implementation of this research, it was necessary execution of some stages: bibliographic research, and the providing of better visualization of the theme. The initial acquisition of bacteria, then the cultivation of bacteria to incorporate in the concrete. The third stage was laboratory tests to analyze the new concrete and make reports and data tabulation. The early costs results are encouraging further study.

Author Biographies

Ana Clara Alves Andrade, Universidade do Estado de Minas Gerais

Civil engineer from the University of the State of Minas Gerais - Campus João Monlevade.    

Ricardo Luiz Perez Teixeira, Universidade Federal de Itajubá

Doctor en Ciencias, Ingeniería Metalúrgica y de Materiales por la Universidad Federal de Río de Janeiro, profesor de magisterio superior en la Universidad Federal de Itajubá - Campus Itabira.      

Ladir Antônio da Silva Júnior, Universidade do Estado de Minas Gerais

M. Sc. in civil engineering from the Federal University of Viçosa, professor at the University of the State of Minas Gerais - Campus João Monlevade.

Haroldo Lhou Hasegawa, Universidade Tecnológica Federal do Paraná

Professor na Universidade Tecnológica Federal do Paraná – Campus Londrina. Doutor em Ciência e Engenharia de Materiais pela Universidade Federal de São Carlos, também é especialista em Engenharia de Produção pelo Curso de Especialização em Engenharia de Produção pela UNESP. 

Leonardo Lúcio de Araújo Gouveia, Universidade do Estado de Minas Gerais

M. Sc. in geography at the Pontifical Catholic University of Minas Gerais, professor at the University of the State of Minas Gerais - João Monlevade Campus and at the Tiradentes College of PMMG.

References

Abreu, B. G., de Araújo, C. E. S., Órfão, R. B., & dos Santos Amarante, M. (2019). BIOCONCRETO. Diálogos Interdisciplinares, 8(2), 45-55.

ABNT NBR 7680-1:2015 current version: 2015, 2015. Concrete - Sampling, preparing, testing and result analysis of concrete cores Part 1: Axial compressive strength. São Paulo: Associação Brasileira de Normas Técnicas.

ABNT NBR 5738:2015 current version:2016, 2015.Concrete - Procedure for molding and curing concrete test specimens. São Paulo: Associação Brasileira de Normas Técnicas.

ABNT NBR 5739:2018, 2018. Concrete - Compression test of cylindrical specimens,]. São Paulo: Associação Brasileira de Normas Técnicas.

ABNT NBR 10786:2013, 2013. Hardened concrete – Determination of the water permeability coefficient. São Paulo: Associação Brasileira de Normas Técnicas.

ABNT NBR 6118: 2014 errata 2014, 2014. Design of concrete structures - Procedure. São Paulo: Associação Brasileira de Normas Técnicas.

Algaifi, H. A., Bakar, S. A., Sam, A. R. M., Abidin, A. R. Z., Shahir, S., & AL-Towayti, W. A. H. (2018). Numerical modeling for crack self-healing concrete by microbial calcium carbonate. Construction and Building Materials, 189, 816-824.

Andrade, A. C. A., Parreira, D. P., de Araújo Gouveia, L. L., & Teixeira, R. L. P. (2021). Blocos de concreto com rejeito siderúrgico carepa para construção civil, The use of scale is a major waste of the steel industry for manufacture of concrete block. Brazilian Journal of Development, 7(11), 107768-107776.

André, A. L., Conceição, I. C., De Freitas, M. R., & Teixeira, R. L. P. (2021). Green concrete production using partial replacement of crushed stone for PET. Revista Brasileira de Iniciação Científica, 8, e021005-e021005.

De Belie, N., Gruyaert, E., Al‐Tabbaa, A., Antonaci, P., Baera, C., Bajare, D., ... & Jonkers, H. M. (2018). A review of self‐healing concrete for damage management of structures. Advanced materials interfaces, 5(17), 1800074.

De Sitter, W. R. Costs for Service Life Optimization-The Law of Fives; Durability of Concrete Structures, CEB-RILEM International Workshop, Copenhagen 1983. CEB bulletin, (152).

De Souza, V. C. M., & Ripper, T. (1998). Patologia, recuperação e reforço de estruturas de concreto. Pini.

Berenguer, R. A., Ramos, J. L. D. M., Carneiro, F. L., Monteiro, E. C. B., Silva, F. A. N., & De Oliveira, R. A. (2016). Discussion on Pathological Manifestations in Reinforced Concrete Buildings and Their Relations with the Construction Process. Electronic Journal of Geotechnical Engineering, 21, 4163-4173.

Drey, D. F., & Seidler, N. Efeitos dos aditivos impermeabilizantes no concreto. Revista de Engenharia e Tecnologia, 5(2), 12-23.

Ferreira, C. R., Tavares, S. S., Ferreira, B. H. M., Fernandes, A. M., Fonseca, S. J. G., Oliveira, C. A. D. S., ... & Gouveia, L. L. D. A. (2017). Comparative study about mechanical properties of strutural standard concrete and concrete with addition of vegetable fibers. Materials Research, 20, 102-107.

Estrela, C. (2018). Metodologia Científica: Ciência, Ensino, Pesquisa. Editora Artes Médicas.

Fernandes, A. M., Conceição, I. C., de Freitas, M. R., & Teixeira, R. L. P. (2019). Estudo da substituição parcial do pó de pedra por pó de balão e por resíduos de pós consumo e industrial em blocos pré-moldados de concreto. Revista Brasileira de Iniciação Científica, 7(1), 118-148.

Ferreira, R. M., & Jalali, S. (2001). Avaliação dos ensaios correntes para a medição da durabilidade do betão. "Engenharia Civil". ISSN 0873-1152. 12(Set. 2001), 41-54.

Ivanov, V., Stabnikov, V., Stabnikova, O., & Kawasaki, S. (2019). Environmental safety and biosafety in construction biotechnology. World Journal of Microbiology and Biotechnology, 35(2), 1-11.

Kadapure, S. A. (2021). The biotechnology approach for sustainable concrete material–a review. Magazine of Concrete Research, 73(24), 1241-1249.

Koche, J. C. (2011). Fundamentos de metodologia científica. Petrópolis: Vozes

Leite, P. H. T., Ribeiro, T. R. S., Fonseca, I.S., Miranda, R. R., Teixeira, R. L. P., Gouveia, L. L. A. (November, 2019a, 2883–2885). The study of the use of bacteria in the composition of the concrete for their regeneration after the appearance of fissures in hot climate regions,” Extended Abstract. In Proceedings XVIII Brazilian MRS Meeting, 18º SBPMAT 2019, Balneário Camboriú, SC.

Leite, P. H. T., Teixeira, R. L. P., Gouveia, L. L.A. (2019b). Produção de concreto auto-regenerativos para indústria de construção civil. In Proceedings of the XXVI Production Engineering Symposium. XXVI SIMPEP, Bauru, SP.

Ludke, M. & Andre, M. E. D. A. (2013). Pesquisas em educação: uma abordagem qualitativa. São Paulo: E.P.U.

Nery, M. E. E., Pulido, D. E. C., Oliveros, P. A. C., Medina, J. A. R., Bello, Q. Y. O., & Fuentes, M. S. P. (2019). Mechanisms of encapsulation of bacteria in self-healing concrete. Dyna, 86(210), 17-22.

Omoregie, A. I., Ginjom, R. H., & Nissom, P. M. (2018). Microbially induced carbonate precipitation via ureolysis process: a mini-review. Transactions on Science and Technology, 5(4), 245-256.

Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia da pesquisa científica. [e-book]. Santa Maria. Ed (pp. 3-9).

Teixeira, R. L. P., Silva, P. C. D., Shitsuka, R., de Araújo Brito, M. L., Kaizer, B. M., & e Silva, P. D. C. (2020a, April). Project-Based Learning with Industry as a Learning Strategy for Improvement Engineering Education. In 2020 IEEE Global Engineering Education Conference (EDUCON) (pp. 1-2). IEEE.

Teixeira, R. L. P., Silva, P. C. D., Shitsuka, R., de Araújo Brito, M. L., Kaizer, B. M., & Silva, P. D. C. (2020b, April). Project Based Learning in Engineering Education in Close Collaboration with Industry. In 2020 IEEE Global Engineering Education Conference (EDUCON) (pp. 1945-1953). IEEE.

Yin, R. K. (2015). O estudo de caso. Porto Alegre: Bookman.

Zhang, J., Zhao, C., Zhou, A., Yang, C., Zhao, L., & Li, Z. (2019). Aragonite formation induced by open cultures of microbial consortia to heal cracks in concrete: Insights into healing mechanisms and crystal polymorphs. Construction and Building Materials, 224, 815-822.

Downloads

Published

21/05/2022

How to Cite

ANDRADE, A. C. A.; TEIXEIRA, R. L. P.; SILVA JÚNIOR, L. A. da .; HASEGAWA, H. L.; GOUVEIA, L. L. de A. The estimation of the cost design of bacteria-based self-healing concrete. Research, Society and Development, [S. l.], v. 11, n. 7, p. e20011729908, 2022. DOI: 10.33448/rsd-v11i7.29908. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/29908. Acesso em: 18 apr. 2024.

Issue

Vol. 11 No. 7

Section

Engineerings

License

Copyright (c) 2022 Ana Clara Alves Andrade; Ricardo Luiz Perez Teixeira; Ladir Antônio da Silva Júnior; Haroldo Lhou Hasegawa; Leonardo Lúcio de Araújo Gouveia

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.