Proceso de secado de materiales cerámicos arcillosos: una revisión

Autores/as

DOI:

https://doi.org/10.33448/rsd-v9i11.10300

Palabras clave:

Cerámica; Secado; Calidad; Control; Optimización.

Resumen

El secado es una operación de transferencia de calor y masa que implica la eliminación de la humedad, siendo un paso importante y costoso en el proceso de fabricación de varios productos. Para los materiales cerámicos, el proceso de secado es necesario para eliminar el agua que se agregó a la arcilla en el paso de moldeo y para proporcionar la resistencia necesaria para reducir las posibilidades de falla durante el paso de quemado del producto. El control del proceso de secado es fundamental para reducir defectos en el material, pérdida de productividad y consumo energético. Por su importancia, este trabajo tiene como objetivo presentar una revisión de varios temas relacionados con el secado de materiales cerámicos. Aquí se discuten diferentes aspectos, tales como: los fundamentos, cinética de remoción de humedad, defectos, control y optimización del proceso de secado, con énfasis en productos arcillosos. La idea es otorgar subsidios para que investigadores e industriales puedan mejorar sus conocimientos y tomar decisiones adecuadas sobre este tema de gran importancia para la economía del país.

Citas

Almeida, G. S., Fernandes, M. A. F., Fernandes, J. N., Neves, G. A., Barbosa de Lima, W. M. P., & de Lima, A. G. B. (2014). Drying of industrial ceramic bricks: An experimental investigation in oven. Defect and Diffusion Forum, 353, 116–120. https://doi.org/10.4028/www.scientific.net/DDF.353.116

Alves, H. J., Melchiades, F. G., & Boschi, A. O. (2008). Consumo de gás natural na indústria de revestimentos cerâmicos brasileira (Consumption of natural gas in Brazilian ceramic tile industry). Cerâmica, 54(331), 326–331.

Araújo, M. V., Delgado, J., & Barbosa de Lima, A. G. (2016). On the Use of CFD in Thermal Analysis of Industrial Hollow Ceramic Brick. Diffusion Foundations, 10, 70–82. https://doi.org/10.4028/www.scientific.net/DF.10.70

Araújo, M. V., Santos, R. S., da Silva, R. M., & Barbosa de Lima, A. G. (2017). Drying of Industrial Hollow Ceramic Brick: Analysis of the Moisture Content and Temperature Parameters. Defect and Diffusion Forum, 380, 72–78. https://doi.org/10.4028/www.scientific.net/DDF.380.72

Augier, F., Coumans, W. J., Hugget, A., & Kaasschieter, E. F. (2002). On the risk of cracking in clay drying. Chemical Engineering Journal, 86(1–2), 133–138. https://doi.org/10.1016/S1385-8947(01)00279-0

Banaszak, J., & Kowalski, S. J. (2005). Theoretical and experimental analysis of stresses and fractures in clay like materials during drying. Chemical Engineering and Processing: Process Intensification, 44(4), 497–503. https://doi.org/10.1016/j.cep.2004.06.012

Barbosa Da Silva, J., Almeida, G. S., Barbosa de Lima, W. C. P., Neves, G. A., & de Lima, A. G. B. (2011). Heat and mass diffusion including shrinkage and hygrothermal stress during drying of holed ceramics bricks. Defect and Diffusion Forum, 312, 971–976. https://doi.org/10.4028/www.scientific.net/DDF.312-315.971

Barbosa da Silva, J., Almeida, G. S., Neves, G. A., Barbosa de Lima, W. C. P., de Farias Neto, S. R., & de Lima, A. G. B. (2012). Heat and mass transfer and volume variations during drying of industrial ceramic bricks: an experimental investigation. Defect and Diffusion Forum, 326, 267–272. https://doi.org/10.4028/www.scientific.net/DDF.326-328.267

Batista, V. R., Nascimento, J. J. S., & LIMA, A. G. B. L. (2009). Secagem e retração volumétrica de tijolos cerâmicos maciços e vazados: uma investigação teórica e experimental. Matéria, Rio de Janeiro, 14(4). https://doi.org/10.1590/S1517-70762009000400002

Batista, V. R., Nascimento, J. J. S., & Lima, A. G. B. (2008). Secagem e queima de tijolos cerâmicos maciços e vazados incluindo variações dimensionais e danos estruturais. Revista Eletrônica de Materiais e Processos, 3(1), 46–61.

Bergman, T. L., Incropera, F. P., DeWitt, D. P., & Lavine, A. S. (2011). Fundamentals of heat and mass transfer. John Wiley & Sons.

Boch, P., & Niepce, J.-C. (2010). Ceramic Materials: Processes, Properties, and Applications (Vol. 98). John Wiley & Sons.

Brongniart, A. (1844). Traité des arts céramiques ou des poteries considérées dans leur histoire, leur pratique et leur théorie (Vol. 2). Bechet; Mathias.

Brosnan, D. A., & Robinson, G. C. (2003). Introduction to drying of ceramics: with laboratory exercises. American Ceramic Society.

Cadé, M. A., Nascimento, J. J. S., & Lima, A. G. B. (2005). Secagem de tijolos cerâmicos vazados: uma aproximação por volumes finitos. Revista Matéria, 10(3), 443–453.

Callister Jr, W. D., & Rethwisch, D. G. (2012). Fundamentals of materials science and engineering: an integrated approach. John Wiley & Sons.

Callister Jr, W. D., & Rethwisch, D. G. (2011). Materials science and engineering (Vol. 5). John Wiley & Sons NY.

Cengel, Y. A. (2007). Heat and mass transfer. Tata McGraw-Hill Education.

Chua, K. J., Mujumdar, A. S., & Chou, S. K. (2003). Intermittent drying of bioproducts––an overview. Bioresource Technology, 90(3), 285–295. https://doi.org/10.1016/S0960-8524(03)00133-0

Cihan, A., Kahveci, K., & Hacıhafızoğlu, O. (2007). Modelling of intermittent drying of thin layer rough rice. Journal of Food Engineering, 79(1), 293–298. https://doi.org/10.1016/j.jfoodeng.2006.01.057

Clark, D. E., & Sutton, W. H. (1996). Microwave processing of materials. Annual Review of Materials Science, 26(1), 299–331.

Comini, G., & Lewis, R. W. (1976). A numerical solution of two-dimensional problems involving heat and mass transfer. International Journal of Heat and Mass Transfer, 19(12), 1387–1392. https://doi.org/10.1016/0017-9310(76)90067-3

da Silva Almeida, G., da Silva, J. B., e Silva, C. J., Swarnakar, R., de Araújo Neves, G., & de Lima, A. G. B. (2013). Heat and mass transport in an industrial tunnel dryer: modeling and simulation applied to hollow bricks. Applied Thermal Engineering, 55(1–2), 78–86. https://doi.org/10.1016/j.applthermaleng.2013.02.042

de Lima, A. G. B., da Silva, J. B., Almeida, G. S., Nascimento, J. J. S., Tavares, F. V. S., & Silva, V. S. (2016). Clay products convective drying: foundations, modeling and applications. In Drying and Energy Technologies (pp. 43–70). https://doi.org/10.1007/978-3-319-19767-8_3

Defraeye, T. (2014). Advanced computational modelling for drying processes–A review. Applied Energy, 131, 323–344. https://doi.org/10.1016/j.apenergy.2014.06.027

Edgar, R. H., & Osepchuk, J. M. (2001). Consumer, commercial, and industrial microwave ovens and heating systems. In Handbook of Microwave Technology for Food Application (pp. 215–278). New York, USA: Marcel Dekker.

Etuk, S. E., Akpabio, I. O., & Udoh, E. M. (2003). Comparison of the thermal properties of clay samples as potential walling material for naturally cooled building design. Journal of Environmental Sciences, 15(1), 65–68.

Ford, R. W. (2013). Ceramics drying. Oxford, England: Elsevier.

Fortes, M., & Okos, M. R. (1980). Drying theories: their bases and limitations as applied to foods and grains. Advances in Drying, 1, 119–154.

Hasatani, M., Itaya, Y., & Hayakawa, K. (1992). -Viscoelastic Strain-Stress and Heat/Moisture Transfer. Drying Technology, 10(4), 1013–1036. https://doi.org/10.1080/07373939208916493

Hasatani, M., Itaya, Y., Muroie, K., & Taniguchi, S. (1993). Contraction characlfrlstlcs of molded ceramics during drying. Drying Technology, 11(4), 815–830. https://doi.org/10.1080/07373939308916865

Itaya, Y., Mabuchi, S., & Hasatani, M. (1995). Deformation behavior of ceramic slabs by nonuniform drying. Drying Technology, 13(3), 801–819. https://doi.org/10.1080/07373939508916984

Itaya, Y., Mori, S., & Hasatani, M. (1999). Effect of intermittent heating on drying-induced strain-stress of molded clay. Drying Technology, 17(7–8), 1261–1271. https://doi.org/10.1080/07373939908917613

Itaya, Y., Okouchi, K., & Mori, S. (2001). Effect of heating modes on internal strain–stress formation during drying of molded ceramics. Drying Technology, 19(7), 1491–1504. https://doi.org/10.1081/DRT-100105302

Itaya, Y., Taniguchi, S., & Hasatani, M. (1997). A numerical study of transient deformation and stress behavior of a clay slab during drying. Drying Technology, 15(1), 1–21. https://doi.org/10.1080/07373939708917216

Itaya, Y., Uchiyama, S., Hatano, S., & Mori, S. (2005). Drying enhancement of clay slab by microwave heating. Drying Technology, 23(6), 1243–1255. https://doi.org/10.1081/DRT-200059487

Itaya, Y., Uchiyama, S., & Mori, S. (2007). Internal heating effect and enhancement of drying of ceramics by microwave heating with dynamic control. Transport in Porous Media, 66(1–2), 29–42. https://doi.org/10.1007/s11242-006-9020-4

Kawaguti, W. M. (2005). Estudo do comportamento térmico de um fornos intermitentes tipo paulistinha utilizados na indústria de cerâmica vermelha (Dissertação de Mestrado em Engenharia Mecânica, Universidade Federal de Santa Catarina, Santa Catarina). Obtido em https://repositorio.ufsc.br/handle/123456789/101786

Ketelaars, A. A. J., Jomaa, W., Piggali, J. R., & Coumans, W. J. (1992). Drying shrinkage and stresses. 8th International Drying Symposium (IDS’92), August 2-5, 1992, Montreal, Quebec, Canada. Elsevier.

Keum, Y. T., Jeong, J. H., & Auh, K. H. (2000). Finite-element simulation of ceramic drying processes. Modelling and Simulation in Materials Science and Engineering, 8(4), 541.

Khalili, K., Bagherian, M., & Khisheh, S. (2014). Numerical simulation of drying ceramic using finite element and machine vision. Procedia Technology, 12, 388–393. https://doi.org/10.1016/j.protcy.2013.12.504

Kingery, W. D., Bowen, H. K., & Uhlmann, D. R. (1976). Introduction to ceramics (Vol. 183). Wiley New York.

Kowalski, S. J., & Pawłowski, A. (2011). Energy consumption and quality aspect by intermittent drying. Chemical Engineering and Processing: Process Intensification, 50(4), 384–390. https://doi.org/10.1016/j.cep.2011.02.012

Kowalski, S. J., & Rybicki, A. (2004). Qualitative aspects of convective and microwave drying of saturated porous materials. Drying Technology, 22(5), 1173–1189. https://doi.org/10.1081/DRT-120038586

Kowalski, S. J., Musielak, G., & Banaszak, J. (2010). Heat and mass transfer during microwave‐convective drying. AIChE Journal, 56(1), 24–35. https://doi.org/10.1002/aic.11948

Kowalski, S. J., Rajewska, K., & Rybicki, A. (2004). Mechanical effects in saturated capillary-porous materials during convective and microwave drying. Drying Technology, 22(10), 2291–2308. https://doi.org/10.1081/DRT-200040004

Kowalski, S. J., Rajewska, K., & Rybicki, A. (2005). Stresses generated during convective and microwave drying. Drying Technology, 23(9–11), 1875–1893. https://doi.org/10.1080/07373930500210226

Kowalski, S. J. (2012). Thermomechanics of drying processes (Vol. 8). https://doi.org/10.1007/978-3-540-36405-4

Kowalski, S. J., & Mielniczuk, B. (2007). Analysis of effectiveness and stress development during convective and microwave drying. Drying Technology, 26(1), 64–77. https://doi.org/10.1080/07373930701781637

Kumar, C., Karim, M. A., & Joardder, M. U. H. (2014). Intermittent drying of food products: A critical review. Journal of Food Engineering, 121, 48–57. https://doi.org/10.1016/j.jfoodeng.2013.08.014

ltaya, Y., & Hasatani, M. (1996). R & D Needs-Drying of Ceramics. Drying Technology, 14(6), 1301–1313. https://doi.org/10.1080/07373939608917147

Margueron, J. (2003). Les mésopotamiens. Editions A&J Picard.

Mihoubi, D., & Bellagi, A. (2009). Drying-induced stresses during convective and combined microwave and convective drying of saturated porous media. Drying Technology, 27(7–8), 851–856. https://doi.org/10.1080/07373930902988122

Mihoubi, D., Zagrouba, F., Vaxelaire, J., Bellagi, A., & Roques, M. (2004). Transfer phenomena during the drying of a shrinkable product: modeling and simulation. Drying Technology, 22(1–2), 91–109. https://doi.org/10.1081/DRT-120028216

Osepchuk, J. M. (2002). Microwave power applications. IEEE Transactions on Microwave Theory and Techniques, 50(3), 975–985. https://doi.org/10.1109/22.989980

Pereira A. S., Shitsuka, D. M., Parreira, F. J., Shitsuka, R. (2018). Metodologia da pesquisa científica. Editora UAB/NTE/UFSM, Santa Maria/RS. Recuperado de https://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_MetodologiaPesquisa-Cientifica.pdf?sequence=1.

Reed, J. S. (1995). Principles of ceramics processing. New York, USA: John Wiley & Sons, Inc.

Santos, G. M. (2001). Estudo do comportamento térmico de um forno túnel aplicado à indústria de cerâmica vermelha.

Shiraki, Y. (1955a). Studies on Clay–Water System.(II-1) Plasticity of Clay. Journal of the Ceramic Association of Japan, 63(709), 233–243.

Shiraki, Y. (1955b). Studies on Clay–Water System.(II-3) Theoretical Consideration to the Visco-Elastic Property of Clay–Water Masses. Journal of the Ceramic Association of Japan, 63(712), 421–429.

Shiraki, Y., & Fukuura, Y. (1955). Studies on Clay–Water System.(II-4) Plastic Deformation of Nearly Dry Clay, and Relations between Water Content and Modulus of Rupture and Modulus of Elasticity. Journal of the Ceramic Association of Japan, 63(714), 527–532.

Shiraki, Y., & Komaki, T. (1955). Studies on Clay–Water System.(I-12) Visco-Elastic Properties of Clay Paste. Journal of the Ceramic Association of Japan, 63(708), 194–197.

Silva, V. S., Delgado, J., Barbosa de Lima, W. M. P., & Barbosa de Lima, A. G. (2016). Heat and mass transfer in holed ceramic material using lumped model. Diffusion Foundations, 7, 30–52. https://doi.org/10.4028/www.scientific.net/DF.7.30

Su, S.-L. (1997). Modeling of multi-phase moisture transfer and induced stress in drying clay bricks. Applied Clay Science, 12(3), 189–207. https://doi.org/10.1016/S0169-1317(97)00003-3

Teixeira de Brito, M. K., Teixeira de Almeida, D. B., Barbosa de Lima, A. G., Almeida Rocha, L., Santana de Lima, E., & Barbosa de Oliveira, V. A. (2016). Heat and Mass Transfer during Drying of Clay Ceramic Materials: A Three-Dimensional Analytical Study. Diffusion Foundations, 10, 93–106. https://doi.org/10.4028/www.scientific.net/DF.10.93

Van der Zanden, A. J. J., Schoenmakers, A. M. E., & Kerkhof, P. (1996a). Isothermal vapour and liquid transport inside clay during drying. Drying Technology, 14(3–4), 647–676. https://doi.org/10.1080/07373939608917119

Van Der Zanden, A. J. J., Turner, I., & Mujumdar, A. S. (1996b). Modelling and simulating simultaneous liquid and vapour transport in partially saturated porous materials. Mathematical Modelling and Numerical Techniques in Drying Technology/Eds. Turner & Mujumdar, 157–177.

Vandiver, P. B. (1990). Venuses and wolverines: the origins of ceramic technology, ca. 26 000 B. P. Ceramics and Civilization, 5 Pp., 13.

Zagrouba, F., Mihoubi, D., & Bellagi, A. (2002). Drying of clay. II Rheological modelisation and simulation of physical phenomena. Drying Technology, 20(10), 1895–1917. https://doi.org/10.1081/DRT-120015575

Descargas

Publicado

03/12/2020

Cómo citar

GOMEZ, R. S. .; MAGALHÃES , H. L. F. .; PORTO , T. R. N. .; LIMA , E. S. de .; SANTANA, R. A. C. de .; GOMES, K. C. .; LIMA, W. M. P. B. de .; LIMA, A. G. B. de . Proceso de secado de materiales cerámicos arcillosos: una revisión. Research, Society and Development, [S. l.], v. 9, n. 11, p. e78591110300, 2020. DOI: 10.33448/rsd-v9i11.10300. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/10300. Acesso em: 23 nov. 2024.

Número

Vol. 9 Núm. 11

Sección

Revisiones

Licencia

Derechos de autor 2020 Ricardo Soares Gomez; Hortência Luma Fernandes Magalhães ; Túlio Rafael Nascimento Porto ; Elisiane Santana de Lima ; Renato Alexandre Costa de Santana; Kelly Cristiane Gomes; Wanderson Magno Paiva Barbosa de Lima; Antonio Gilson Barbosa de Lima

Creative Commons License

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.

Los autores que publican en esta revista concuerdan con los siguientes términos:

1) Los autores mantienen los derechos de autor y conceden a la revista el derecho de primera publicación, con el trabajo simultáneamente licenciado bajo la Licencia Creative Commons Attribution que permite el compartir el trabajo con reconocimiento de la autoría y publicación inicial en esta revista.

2) Los autores tienen autorización para asumir contratos adicionales por separado, para distribución no exclusiva de la versión del trabajo publicada en esta revista (por ejemplo, publicar en repositorio institucional o como capítulo de libro), con reconocimiento de autoría y publicación inicial en esta revista.

3) Los autores tienen permiso y son estimulados a publicar y distribuir su trabajo en línea (por ejemplo, en repositorios institucionales o en su página personal) a cualquier punto antes o durante el proceso editorial, ya que esto puede generar cambios productivos, así como aumentar el impacto y la cita del trabajo publicado.