Valorização da lama do beneficiamento de rochas ornamentais em pavimentos flexíveis

Renan Tavares Fachin; Francisco Roger Carneiro  Ribeiro; Fernanda  Pacheco; Feliciane Andrade  Brehm; Regina Célia Espinosa  Modolo

doi:10.33448/rsd-v11i1.25404

Autores/as

Renan Tavares Fachin Universidade do Vale do Rio do Sinos https://orcid.org/0000-0003-1893-0110
Francisco Roger Carneiro Ribeiro Universidade Federal do Rio Grande do Sul https://orcid.org/0000-0001-8790-3023
Fernanda Pacheco Universidade do Vale do Rio do Sinos https://orcid.org/0000-0003-3455-491X
Feliciane Andrade Brehm Universidade do Vale do Rio do Sinos https://orcid.org/0000-0002-3272-5837
Regina Célia Espinosa Modolo Universidade do Vale do Rio do Sinos https://orcid.org/0000-0001-7088-2502

DOI:

https://doi.org/10.33448/rsd-v11i1.25404

Palabras clave:

Residuos industriales sólidos; Lodos procedentes del procesamiento de rocas ornamentales; Rellenos; Hormigón bituminoso mecanizado en caliente.

Resumen

El objetivo de este estudio es evaluar la incorporación de barro en el beneficio de las rocas ornamentales como material de recubrimiento, a través de sustituciones parciales de materiales convencionales, en el hormigón betuminoso utilizado en el quente. Se han investigado las características físico-químicas del material y de los agregados que componen la mezcla asfáltica, seguido del desarrollo de fórmulas para la ejecución de la prueba de resistencia mecánica por el método Marshall. Los resultados muestran que la sustitución de los materiales naturales por roca residual mejora ligeramente las propiedades físicas y mecánicas de las mezclas bituminosas. Se concluye, por tanto, que la lama del beneficio de las rocas ornamentales presenta un potencial de utilización y puede ser un material prometedor para ser utilizado por la industria de la pavimentación, evitando así la extracción mineral de recursos naturales no renovables.

Citas

Aljassar, A. H., Metwalli, S., & Ali, M. A. (2004). Effect of Filler Types on Marshall Stability and Retained Strength of Asphalt Concrete. International Journal of Pavement Engineering, 5, 47-51.

Amaral, L.F., Carvalho, R. P. R. G., Silva, B. M., Delaqua, D. C. G., Monteiro, S. N., & Vieira, C. M. F. (2019). Development of ceramic paver with ornamental rock waste. Journal of Materials Research and Technology, 8, 599-608.

American Society for Testing and Materials. (2005). ASTM D4791: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate.

Arab, P. B., Araujo, T. P., & Pejon, O. J. (2015). Identification of clay minerals in mixtures subjected to differential thermal and thermogravimetry analyses and methylene blue adsorption tests. Applied Clay Science, 114, 133-140.

Asphalt Institute. (2001). HMA Construction. Manual Series No. 22.

Associação Brasileira de Normas Técnicas. (2016). NBR 7180: Solo – Determinação do limite de plasticidade.

Associação Brasileira de Normas Técnicas. (2017). NBR 6459: Solo – Determinação do limite de liquidez.

Barra, B., Momm, L., Guerrero, Y., & Bernucci, L. (2014). Characterization of granite and limestone powders for use as fillers in bituminous mastics dosage. Anais da Academia Brasileira de Ciências, 86, 995-1002.

Behl, A., Kumar, G., Sharma, G., & Jain, P. K. (2013). Evaluation of field performance of warm-mix asphalt pavements in India. Procedia - Social and Behavioral Sciences, 104, 158-167.

Chandra, S., & Choudhary, R. (2013). Performance characteristics of bituminous concrete with industrial wastes as filler. Journal of Materials in Civil Engineering, 25, 1666-1673.

Chen, H., & Xu, Q. (2010). Experimental study of fibers in stabilizing and reinforcing asphalt binder. Fuel, 89, 1616-1622.

Cia. (2017). Available From: https://www.cia.gov/library/publications/the-worldfactbook/ rankorder/2085rank.html.

Crispino, M., Mariani, E., & Toraldo, E. (2013). Assessment of fiber-reinforced bituminous mixtures compaction temperatures through mastics viscosity tests Construction and Building Materials, 38, 1031-1039.

Departamento Nacional de Estradas de Rodagem. (1995). DNER-ME 043: Mistura betuminosas a quente – Ensaio Marshall.

Departamento Nacional de Infraestrutura de Transportes. (2006). DNIT ES 031: Pavimentos flexíveis – Concreto asfáltico – Especificações de serviço.

Hasan, M.R.M., Chew, J., Jamshidi, A., Yang, X., & Hamzah, M. O. (2019). Review of sustainability, pretreatment, and engineering considerations of asphalt modifiers from the industrial solid wastes. Journal of Traffic and Transportation Engineering, 6, 209-244.

Karasahin, M., & Terzi, S. (2007). Evaluation of marble waste dust in the mixture of asphaltic concrete. Construction and Building Materials, 21, 616-620.

Li, Q., Yanjun, Q., Rahman, A., & Ding, H. (2018). Application of steel slag powder to enhance the low-temperature fracture properties of asphalt mastic and its corresponding mechanism. Journal of Cleaner Production, 184, 21-31.

Matos, P., Micaelo, R., Duarte, C., & Quaresma, L. (2014). Influence of bitumen and filler on the selection of appropriate mixing and compaction temperatures. International Journal of Pavement Research and Technology, 7, 237-246.

Modarres, A., Rahmanzadeh, M., & Ayar, R. (2015). Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts. Journal of Cleaner Production, 91, 262-268.

Modolo, R., Benta, A., Ferreira, V. M., & Machado, L. M. (2010). Pulp and paper plant wastes valorisation in bituminous mixes. Waste Management, 30, 685-696.

Pasandín, A. R., Pérez, I., Ramírez, A., & Cano, M. M. (2016). Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler. Journal of Cleaner Production, 112, 853-862.

Rahman, Md. A., Imteaz, M. A., Arulrajah, A., Piratheepan, J., & Disfani, M. M. (2015). Recycled construction and demolition materials in permeable pavement systems: geotechnical and hydraulic characteristics. Journal of Cleaner Production, 90, 193-194.

Roberts, F. L., Brown, E. R., Kandhal, P. S., Lee, D., Kennedy, T. W., & Kim, Y. R. (1996). Hot mix asphalt materials, mixture design and construction.

Wang, H., Al-Qadi, I. L., Faheem, A. F., Bahia, H. U., Yang, S., & Reinke, G. H. (2011). Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record, 2208, 33-39.

Wang, H., Liu, X., Apostolidis, P., & Scarpas, T. (2018). Review of warm mix rubberized asphalt concrete: Towards a sustainable paving technology. Journal of Cleaner Production, 177, 302-314.

Wei, C. J., Poovaneshvaran, S., Hasan, M. R. M., Hamzah, M. O., Valentin, J., & Sani, A. (2020). Microscopic analysis and mechanical properties of recycled paper mill sludge modified asphalt mixture using granite and limestone aggregates. Construction and Building Materials, 243.

West, R. C., & James, R. S. (2006). Evaluation of a lime kiln dust as a mineral filler for stone matrix asphalt. Transportation Research Board, 750, 1-18.

Xiong, R., Chu, C., Qiao, N., Wang, L., Yang, F., Sheng, Y., Guan, B., Niu, D., Geng, J., & Chen, H. (2019). Performance evaluation of asphalt mixture exposed to dynamic water and chlorine salt erosion. Construction and Building Materials, 201, 121-126.

Zhang, M., Wang, Y., Song, Y., Zhang, T., & Wang, J. (2016). Manifest system for management of non-hazardous industrial solid wastes: results from a Tianjin industrial park. Journal of Cleaner Production, 133, 252-261.

Zulkati, A., Diew, W. Y., & Delai, D. S. (2012). Effects of fillers on properties of asphalt-concrete mixture. Journal of Transportation Engineering, 138, 902-910.

Utilización de lodos de procesamiento de piedra ornamental en pavimentos flexibles

Autores/as

DOI:

Palabras clave:

Resumen

Citas

Descargas

Publicado

Cómo citar

Número

Sección

Licencia

JOURNAL METRICS

Idioma

Enviar un artículo