Applicability of technological development in oral rehabilitation: case report

Authors

DOI:

https://doi.org/10.33448/rsd-v10i1.12158

Keywords:

Cone-Beam Computed Tomography; Computer-Aided Design; Mouth Rehabilitation; Dental Implants; Three-dimensional printing.

Abstract

Rehabilitation dentistry is undergoing a major evolution in all areas of knowledge, whether through scientific research, development of surgical techniques and development of materials. With the emergence of new technologies, more resources are being added to the daily clinic, since materials and techniques help from diagnosis to the manufacture of prostheses on implants. The objective of this clinical case report is to demonstrate the importance of associating several areas of knowledge in implant-supported rehabilitation, valuing the benefits of using cone beam computed tomography, the CAD / CAM system, intraoral scanners and adhesive techniques in rehabilitation. A 54-year-old patient sought treatment at Fundecto-USP (Fundação Faculdade de Odontologia associated with FOUSP) with a complaint of dental absence in the region of elements 14 and 15, in addition to complaints regarding aesthetics in the anterior region. The diagnosis was made through assembly in a semi-adjustable articulator, photographs and diagnostic waxing. Despite the absence of two elements, rehabilitation with implantation of only element 15 and an increase in elements 16 and 13 was planned. Cone beam computed tomography allowed to identify the absence of sufficient bone height for implant installation in the region of 15, so it was planned installation of the implant with simultaneous lifting of the maxillary sinus membrane. Through intraoral scanning, CAD / CAM technology and clinical information, the virtual waxing project for future crowns was carried out. After approval, the models were printed, reamed the wax crowns, tasted the wax crowns and ceramic reamed crowns. Based on the experience, it seems reasonable to conclude that technological developments have made complex dental rehabilitation faster, more effective and predictable.

References

Amoroso, A. P., Gennari Filho, H., Pellizzer, E. P., Goiato, M. C., Júnior, S., Ferreira, J., & Villa, L. M. R. (2012). Planejamento reverso em implantodontia: relato de caso clínico. Revista Odontológica de Araçatuba, 75-79.

Beldiman, M. A., Tatarciuc, M., Luca, E., & Vițalariu, A. M. (2020). Technological aspects in cad/cam fixed rehabilitation on implants. Romanian Journal of Oral Rehabilitation, 12(2).

Bernardes, S. R., de Matias, T. S. I., & Thomé, G. (2012). Tecnologia CAD/CAM aplicada a prótese dentária e sobre implantes. Jornal ILAPEO, 6(1), 8-13.

Camardella, L., Rothier, E. K. C., Camardella, E. G., & Chaves, R. (2014). A utilização dos modelos digitais em Ortodontia. Ortodontia SPO, 47(1), 75-82.

Condurache, G. G., Matei, M., Boancă, A. C., Buga, V., & Earar, K. (2020). Aesthetic aspects in oral rehabilitation correlated with access to nowadays equipment. Romanian Journal of Oral Rehabilitation, 12(2), 155-164.

da Silva, R. A. R., de Almeida Neto, L. F., Marcelino, K. P., Cardoso, L. C. L., Dantas, E. M., Barbosa, G. A. S., ... & Gondim, A. L. M. F. (2020). Osteotomia segmentar da maxila em área estética para viabilizar reabilitação com implantes dentários: relato de caso. Research, Society and Development, 9(9), e594997525-e594997525.

de Macêdo, F. C., de Almeida Neto, L. F., Marcelino, K. P., Dantas, E. M., Dantas, W. R. M., Barbosa, G. A. S., & Gondim, A. L. M. F. (2020). Tratamento cirúrgico de fratura de mandíbula após transposição do nervo alveolar inferior: relato de caso. Research, Society and Development, 9(9), e838998021-e838998021.

Gondim, A. L. M. F., Miyashita, E. ., Sartori, I. A. de M. ., Traina, A. A., Neves, F. D. das ., Belo, H. D. S. ., Almeida Neto, L. F. de, Marcelino, K. P., Ferreira, I. J., & Riesco, M. G. . (2021). Interdisciplinary treatment for complex aesthetic rehabilitation of the smile: a case report. Research, Society and Development, 10(1), e16310111565. https://doi.org/10.33448/rsd-v10i1.11565

Magda-Ecaterina, A., Monica, A., Ramona, F., Ovidiu, S., & Consuela, F. N. (2018). Aspects of oral rehabilitation using removable dentures: esthetics and functionality. Romanian Journal of Oral Rehabilitation, 10(1), 133-139.

Marcelino, K. P., de Souza, J. A. N., Ribeiro, D. T., Dantas, E. M., Barbosa, G. A. S., Gondim, A. L. M. F., & de Almeida Neto, L. F. (2020). Conduta cirúrgica após perfuração da membrana de Schneider durante sinus lift: relato de caso. Research, Society and Development, 9(10), e9959109425-e9959109425.

Medeiros, M. S., Marcelino, K. P., de Oliveira Júnior, J. C., Pinheiro, N. C. G., Freire, J. C. P., Dantas, E. M., ... & de Almeida Neto, L. F. (2020). Exodontia atraumática e implante imediato em área estética: relato de caso. Research, Society and Development, 9(9), e880997997-e880997997.

Miyashita, E., & Oliveira, G. G. (2014). Odontologia estética: os desafios da clínica diária. São Paulo: Napoleão.

Miyazaki, T., Hotta, Y., Kunii, J., Kuriyama, S., & Tamaki, Y. (2009). A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials journal, 28(1), 44-56.

Neves, F. D. D., Barbosa, G. A. S., & Bernardes, S. R. (2016). Fundamentos da prótese sobre implantes. In Fundamentos da prótese sobre implantes (pp. 365-365).

Pereira A.S. et al. (2018). Metodologia da pesquisa científica. [e-book]. Santa Maria. Ed. UAB/NTE/UFSM. Recuperado de: https://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1

Van Noort, R. (2012). The future of dental devices is digital. Dental materials, 28(1), 3-12.

Downloads

Published

31/01/2021

How to Cite

BELO, H. D. S. .; GONDIM, A. L. M. F.; NEVES, F. D. das; TRAINA, A. A.; RIESCO, M. G.; FRATA, K. A.; ALMEIDA NETO, L. F. de; MARCELINO, K. P.; SARTORI, I. A. de M. . Applicability of technological development in oral rehabilitation: case report. Research, Society and Development, [S. l.], v. 10, n. 1, p. e57010112158, 2021. DOI: 10.33448/rsd-v10i1.12158. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/12158. Acesso em: 23 apr. 2024.

Issue

Vol. 10 No. 1

Section

Health Sciences

License

Copyright (c) 2021 Horácio D’Aguiar Silva Belo; André Luiz Marinho Falcão Gondim; Flávio Domingues das Neves; Andréia Aparecida Traina; Marta Gonzalez Riesco; Katia Arduini Frata; Luis Ferreira de Almeida Neto; Karolina Pires Marcelino; Ivete Aparecida de Mattias Sartori

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.