Use of fiberglass CAD-CAM post-and-core for rapid orthodontic extrusion of anterior tooth – Case Report
DOI:
https://doi.org/10.33448/rsd-v10i16.23686Keywords:
Computer-Aided Design; Orthodontic Extrusion; Ceramics.Abstract
This report describes the restoration of an anterior fractured tooth with a fiberglass CAD-CAM post-and-core followed by rapid orthodontic extrusion. The post space was prepared, the post-and-core was luted and a interim crown was luted to allow the tooth extrusion through the use of orthodontic buttons and elastic rubber bands. A lithium disilicate glass-ceramic crown was luted and the case was followed up after 6 and 12 months.
References
Abreu, L. O., Romão, C. B. P., Alves, J. V., Pinheiro, K. N. B., Silva, G. M. T., Oliveira, M. A. C., Sousa, R. V., Coura, R. M., Oliveira, N. V. S. G., Oliveira Júnior, J. K. (2021). Oral rehabilitation in ceramic crown using digital flow: case report. Research, Society and Development, 10(14), (e)389101422212.
Aleisa, K., AL-Dwairi, Z. N., Alsubait, S. A., Morgano, S. M. (2016). Pull-out retentive strength of fiber posts cemented at different times in canals obturated with a eugenol-based sealer. J Prosthet Dent, 116:85-90.
Amižić, I. P., Miletić, I., Baraba, A., Fan, Y., Nathanson, D. (2018). In vitro retention of prefabricated and individually formed posts: A pilot study. J Prosthet Dent;1–5.
Braga, G., Bocchieri, A. (2012). A new flapless technique for crown lengthening after orthodontic extrusion. Int J Periodontics Restorative Dent, 32:81-90.
Brown, G. J., Welbury, R. R. (2000). Root extrusion, a practical solution in complicated crown-root incisor fractures. Br Dent J, 189:477-8.
Chen, Z., Li, Y., Deng, X. & Wang, X. (2014). A novel computer-aided method to fabricate a custom one-piece glass fiber dowel-and-core based on digitized impression and crown preparation data. J Prosthodont, 23:276-83.
Cooke, M. S., Scheer, B. (1980) Extrusion of fractured teeth. The evolution of practical clinical techniques. Br Dent J, 149:50-3.
Eid, R. Y., Koken, S., Baba, N. Z., Ounsi, H., Ferrari, M., Salameh, Z. (2019) Effect of fabrication technique and thermal cycling on the bond strength of CAD/CAM milled custom fit anatomical post and core: an in vitro study. J Prosthodont, 28:898–905.
Faria, L. F., Cardoso, M. S., Lima, C. M., Melo, L. A., Leite, F. P. P. (2021). Influence of hydrofluoric acid etching time on the prosthetic adhesion of vitreous ceramics: a systematic review. Research, Society and Development, 10, (2), (e)18810212240.
Fiber Cad Post & Core. (2017). Scientific documentation: Angelus.
Kim, C. S., Choi, S. H., Chai, J. K., Kim, C. K., Cho, K. S. (2004). Surgical extrusion technique for clinical crown lengthening: report of three cases. Int J Periodontics Restorative Dent, Oct;24:412-21.
Libonati, A., Di Taranto, V., Gallusi, G., Montemurro, E., Campanella, V. (2020). CAD/CAM customized glass fiber post and core with digital intraoral impression: A Case Report. Clin Cosmet Investig Dent, 12:17-24.
Liu P., Deng, X. L. & Wang, X. Z. (2010). Use of a CAD/CAM-fabricated glass fiber post and core to restore fractured anterior teeth: A clinical report. J Prosthet Dent, 103(6):330-3.
Moustapha, G., AlShwaimi, E., Silwadi, M., Ounsi, H., Ferrari, M., Salameh, Z. (2019). Marginal and internal fit of CAD/CAM fiber post and cores. Int J Comput Dent. 22(1):45-53.
Nascimento, B. J., Silva, A. J. F., Prescinotti, R., Pedriali, M. B. B. P., Kasuya, A. V. B. Dental fracture with invasion of biological space: Multidisciplinary treatment. Research, Society and Development. 10(5), (e)42010515003, 2021.
Oliveira, L. K. B. F., Silva, S. R. C., Moura, V. S., Andrade, A.M.C., Torres, L.M.M., Silva, M.A.F., Santos, L. R. S., Silva, D. A., Gomes, J. De A., Gonçalves, E.G. (2021) Comparative analysis between fiberglass post and cast metal core: an integrative review. Research, Society and Development, 10(5), (e)51610515236.
Pang, J., Feng, C., Zhu, X., Liu, B., Deng, T., Gao, Y. (2019). Fracture behaviors of maxillary central incisors with flares root canals restored with CAD/CAM integrated glass fiber post-and-cores. Dent Mater J, 38:114-9.
Pereira, A.S., Shitsuka, D.M., Parreira, F.J., & Shitsuka, R. (2018). Metodologia da pesquisa científica.
Ramos Júnior, S., Felizardo, K. R., Guiraldo, R. D., Berger, S. B., Ramos, N. B. P., De Assis, A. C. M., Lopes, M. (2021) B. CAD-CAM endodontic posts: literature review. Research, Society and Development, 10(1), (e)3210111314.
Reitan, K. (1967). Clinical and histologic observations on tooth movement during and after orthodontic treatment. Am J Orthod, 53:721-45.
Sadek, F. T., Monticelli, F., Goracci, C., Tay, F. R., Cardoso, P. E. C. & Ferrari, M. (2007). Bond strength performance of different resin composites used as core materials around fiber posts. Dent Mater, 23:95-9.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Anderson Petrauskas; Bruna Luiza do Nascimento; Isabelle Adad Fornazari; Evelise Machado de Souza; Rodrigo Nunes Rached
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
