Mechanized instrumentation of root canals: a literature review
DOI:
https://doi.org/10.33448/rsd-v12i4.40916Keywords:
Endodontics; Root Canal Therapy; Root canal preparation.Abstract
Endodontics has been undergoing technological advances and clinical improvements, with increasingly faster and more effective treatments. The mechanized technique in root canal preparations reduced operative errors, increasing the clinical success of endodontic treatment. The objective of this work is to carry out a literature review in databases such as Scielo, BVS, Google Scholar, PubMed and some books, in the period between 2012 and 2022, on mechanized instrumentation in endodontic treatment, as well as to discuss its advantages and disadvantages in Endodontics. Based on the findings of this review, the importance of mechanized instruments for Endodontics is observed, both in the dentist's daily life and in promoting improvements in the quality and predictability of root canal preparation, in contrast to conventional ones. However, further studies are needed, as each instrument has its indications and limitations.
References
Cunha, A. D. (2016). Sistemas endodônticos de rotação contínua x sistemas rotatórios alternados: Revisão de literatura (Trabalho de Conclusão de Curso de Graduação em Odontologia). Universidade Tiradentes, Aracajú, SE.
Freitas, C. B. V., Garcia, V. B., Fernandes, K. G. C., Boer, N. C. P., & Moreti, L. C. T. (2018). Sistemas endodônticos rotatórios contínuos x reciprocantes: revisão de literatura. Archives of Health Investigation, 7.
Keskin, C., Inan, U., Demiral, M., & Keleş, A. (2017). Cyclic fatigue resistance of Reciproc Blue, Reciproc, and WaveOne Gold reciprocating instruments. Journal of Endodontics, 43(8), 1360-1363.
Kuzekanani, M. (2018). Nickel–Titanium rotary instruments: Development of the single-file systems. Journal of International Society of Preventive & Community Dentistry, 8(5), 386.
Lakatos, E. M., & Marconi, M. D. A. (2007). Fundamentos de metodologia científica. 5. reimp. Atlas, 310.
Lopes, H. P., & Siqueira Jr, J. F. (2020). Endodontia: Biologia e técnica (5th ed.). Rio de Janeiro: Elsevier.
Martins, D. A., Vieira, E. A. A., & Kervahal, P. A. (2022). Benefícios das limas rotatórias no tratamento Endodontia. Research, Society and Development, 11(13), e595111335957-e595111335957.
Morais, S. J., Duarte, P. H. M., & Junior, N. B. D. (2022). O uso de sistemas mecanizados em endodontia na graduação. Anais da Mostra de Iniciação Científica do Cesuca-ISSN 2317-5915, 16, 749-749.
Moreira, S. H. H. C., de Castro, F. T. L., Diógenes, M. A. R., & Lima, D. M. (2018). Defeitos dentinários após instrumentação mecanizada: Revisão de literatura. Jornada Odontológica dos Acadêmicos da Católica, 4(1).
Mozardo, D. S. B., Hussne, R. P., Nishiyama, C. K., Bodanezi, A., & Câmara, A. S. (2014). Efetividade de um sistema rotatório para retratamento na remoção da obturação de canais radiculares. Revista da Associacao Paulista de Cirurgioes Dentistas, 68(3), 202-207.
Okabashi, S. (2015). Análise das vantagens e desvantagens dos sistemas rotatórios contínuos e reciprocantes nos tratamentos endodônticos: Revisão de literatura. https://openrit.grupotiradentes.com.
Ramos, A. M. A. (2021). Endodontia mecanizada: sistemas rotatórios e reciprocantes. Recuperado de https://openrit.grupotiradentes.com/ [Accessed 1 May 2021].
Schäfer, E., & Bürklein, S. (2012). Impact of nickel–titanium instrumentation of the root canal on clinical outcomes: A focused review. Odontology, 100, 130-136.10.1007/s10266-011-0025-9
Siddique, R., & Nivedhitha, M. S. (2019). Effectiveness of rotary and reciprocating systems on microbial reduction: A systematic review. Journal of Conservative Dentistry: JCD, 22(2), 114.
Silva, E., de Lima, C. O., Vieira, V., Antunes, H., Moreira, E. J. L., & Versiani, M. (2020). Cyclic fatigue and torsional resistance of four martensite-based nickel titanium reciprocating instruments. European Endodontic Journal, 5(3), 231. https://doi.org/10.1016/j.eje.2020.04.004.
Sousa, L. F. M. (2019). Evolução da composição das ligas metálicas utilizadas em endodontia mecanizada: da liga de aço inoxidável à liga M-Wire (Tese de Doutorado). Recuperado de http://hdl.handle.net/10316/74753.
Souza, J. P., de Oliveira, L. K. L., de Araújo, W. R., & Lopes, L. P. B. (2020). Instrumentação endodontica mecanizada e suas evoluções: Revisão de literatura. Brazilian Journal of Development, 6(12), 96231-96240.
Tavares, W. L. F., Mayor, C. D. P. S., de Souza Gonçalves, G., Viana, A. C. D., & Henriques, L. C. F. (2015). Índice de fratura de instrumentos manuais de aço inoxidável e rotatórios de NiTi em clínica de pós-graduação em Endodontia. Arquivos em Odontologia, 51(3), 245-250.
Zuolo, M. L., Kherlakian, D., Junior, J. E. M., Carvalho, M. C. C., & Fagundes, M. (2017). Reintervenção em Endodontia. Rio de Janeiro: Quintessence Editora.
Zupanc, J., Vahdat-Pajouh, N., & Schäfer, E. (2018). New thermomechanically treated NiTi alloys–a review. International Endodontic Journal, 51(10), 1088-1103.10.1111/iej.12999.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Lucas Laerte Ribeiro dos Santos; Jaciara Alves Busarello; Elton de Lima Rodrigues
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
