Navegação em software livre e impressão 3D aplicada ao tratamento de    osteoma mandibular

Jadson Lisboa da  Silva; Vinícius Matheus  Szydloski; Edela Puricelli; Deise Ponzoni

doi:10.33448/rsd-v12i14.44507

Autores

Jadson Lisboa da Silva Universidade Federal do Rio Grande do Sul https://orcid.org/0000-0002-5848-6416
Vinícius Matheus Szydloski Complexo Hospitalar Santa Casa de Misericórdia de Porto Alegre https://orcid.org/0000-0001-7559-7735
Edela Puricelli Universidade Federal do Rio Grande do Sul https://orcid.org/0000-0003-1318-709X
Deise Ponzoni Universidade Federal do Rio Grande do Sul https://orcid.org/0000-0003-2855-7495

DOI:

https://doi.org/10.33448/rsd-v12i14.44507

Palavras-chave:

Impressão tridimensional; Realidade virtual; Cirurgia bucal; Osteoma.

Resumo

Introdução: O osteoma mandibular é uma lesão benigna que pode provocar assimetria facial e comprometer a funcionalidade do paciente. Nessas situações, há indicação de tratamento cirúrgico. O planejamento virtual tem sido empregado pela Cirurgia e Traumatologia Buco-maxilo-faciais oferecendo a possibilidade de simulação detalhada da intervenção e confecção de biomodelos e guias cirúrgicas. Objetivo e relato do caso: O artigo tem por objetivo explorar as possibilidades, benefícios, desafios e limitações do planejamento virtual com softwares livres para tratamento cirúrgico de uma paciente com um osteoma em região de corpo mandibular. O tratamento cirúrgico para exérese da lesão foi realizado, em ambiente hospitalar, sob efeitos de anestesia geral. Considerações finais: A utilização de softwares livres representa uma alternativa viável, especialmente em ambientes com recursos financeiros limitados, como no Sistema Único de Saúde. Essas ferramentas proporcionam aos cirurgiões a criação de modelos tridimensionais detalhados, biomodelos e guias cirúrgicas personalizadas, melhorando a precisão e eficiência dos procedimentos.

Referências

Abbate, V., Togo, G., Committeri, U., Zarone, F., Sammartino, G., Valletta, A., Elefante, A., Califano, L., & Dell'Aversana Orabona, G. (2023). Full Digital Workflow for Mandibular Ameloblastoma Management: Showcase for Technical Description. Journal of clinical medicine, 12(17), 5526.

Agarwal, S., Bhansali, S. P., Talreja, G., & Tiwari, A. (2021). Surgical Excision of Peripheral Osteoma of the Inferior Border of the Mandible by Extraoral Approach: A Case Report of Three Cases. Annals of maxillofacial surgery, 11(2), 333–335.

Alsaywid, B. S., & Abdulhaq, N. M. (2019). Guideline on writing a case report. Urology Annals, 11(2), 126– 131. 10.4103/UA.UA_177_18.

Bessho, K., Murakami, K., Iizuka, T., & Ono, T. (1987). Osteoma in mandibular condyle. International journal of oral and maxillofacial surgery, 16(3), 372–375.

Bhure, U., Roos, J. E., & Strobel, K. (2019). Osteoid osteoma: multimodality imaging with focus on hybrid imaging. European journal of nuclear medicine and molecular imaging, 46(4), 1019–1036.

Blackwell, M. C., Thakkar, B., Flores, A., & Zhang, W. (2023). Extracolonic manifestations of Gardner syndrome: A case report. Imaging science in dentistry, 53(2), 169–174.

Blender HQ – Amsterdam. (s.d.). System Requirements for Blender. https://www.blender.org/download/requirements/

Bodner, L., Gatot, A., Sion-Vardy, N., & Fliss, D. M. (1998). Peripheral osteoma of the mandibular ascending ramus. Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 56(12), 1446–1449.

Boffano, P., Roccia, F., Campisi, P., & Gallesio, C. (2012). Review of 43 osteomas of the craniomaxillofacial region. Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 70(5), 1093–1095.

Cutilli, B. J., & Quinn, P. D. (1992). Traumatically induced peripheral osteoma. Report of a case. Oral surgery, oral medicine, and oral pathology, 73(6), 667–669.

D'Agostino, S., Dell'Olio, F., Tempesta, A., Cervinara, F., D'Amati, A., Dolci, M., Favia, G., Capodiferro, S., & Limongelli, L. (2023). Osteoma of the Jaw as First Clinical Sign of Gardner's Syndrome: The Experience of Two Italian Centers and Review. Journal of clinical medicine, 12(4), 1496.

de Lima, L. B., Caixeta, M. A., & Viana, H. C. (2021). Prototipagem rápida confeccionada pela técnica da impressão tridimensional na cirurgia e implantodontia. Research, Society and Development, 10(12), e405101220633-e405101220633.

DeStefano, V., Khan, S., & Tabada, A. (2020). Applications of PLA in modern medicine. Engineered Regeneration, 76-87.

Estrela, C. (2018). Metodologia Científica: Ciência, Ensino, Pesquisa (3a ed.). Artes Médicas.

Ganry, L., Hersant, B., Bosc, R., Leyder, P., Quilichini, J., & Meningaud, J. P. (2018). Study of medical education in 3D surgical modeling by surgeons with free open-source software: Example of mandibular reconstruction with fibula free flap and creation of its surgical guides. Journal of stomatology, oral and maxillofacial surgery, 119(4), 262–267.

Ganry, L., Hersant, B., Quilichini, J., Leyder, P., & Meningaud, J. P. (2017). Use of the 3D surgical modelling technique with open-source software for mandibular fibula free flap reconstruction and its surgical guides. Journal of stomatology, oral and maxillofacial surgery, 118(3), 197–202.

Guidolin, L. R., Muller, A. F., Tonetto, M. S., Pletsch, A., Puricelli, E., Quevedo, A. S. D., & Ponzoni, D. (2022). Navegação em software livre e impressão 3D: princípios básicos e simulações em Cirurgia e Traumatologia Buco-Maxilo-Faciais. Research, society and development. 11(1), e57811125324, 11p.

Haas, O. L., Jr, Becker, O. E., & de Oliveira, R. B. (2014). Computer-aided planning in orthognathic surgery- systematic review. International journal of oral and maxillofacial surgery, S0901-5027(14)00430-5. Advance online publication.

Halawi, A. M., Maley, J. E., Robinson, R. A., Swenson, C., & Graham, S. M. (2013). Craniofacial osteoma: clinical presentation and patterns of growth. American journal of rhinology & allergy, 27(2), 128–133.

Kim, G. H., Yoon, Y. S., Kim, E. K., & Min, K. H. (2023). Frontal peripheral osteomas: a retrospective study. Archives of craniofacial surgery, 24(1), 24–27.

Larrea-Oyarbide, N., Valmaseda-Castellón, E., Berini-Aytés, L., & Gay-Escoda, C. (2008). Osteomas of the craniofacial region. Review of 106 cases. Journal of oral pathology & medicine: official publication of the International Association of Oral Pathologists and the American Academy of Oral Pathology, 37(1), 38–42.

Lazar, A., & Brookes, C. C. D. (2021). Giant Osteomas: Optimizing Outcomes Through Virtual Planning; a Report of Two Cases and Review of the Literature. Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons, 79(2), 366–375.

Lucamba, A. J., Grillo, R., Jodas, C. R. P., & Teixeira, R. G. (2023). Multiple Gardner Syndrome Osteomas Mimicking Temporomandibular Ankylosis: Case Report. Journal of maxillofacial and oral surgery, 1–4.

Mehra, P., Miner, J., D’Innocenzo, R., & Nadershah, M. (2011). Use of 3-D Stereolithographic Models in Oral and Maxillofacial Surgery. Journal of Oral and Maxillofacial Surgery, 6-13.

Miller, N. R., Gray, J., & Snip, R. (1977). Giant, mushroom-shaped osteoma of the orbit originating from the maxillary sinus. American journal of ophthalmology, 83(4), 587–591.

Movio, G., & Ahmed, S. (2023). Paranasal Osteoma: The Importance of Surveillance. Cureus, 15(9), e44696.

Onică, N., Onică, C. A., Tatarciuc, M., Baciu, E. R., Vlasie, G. L., Ciofu, M., Balan, M., & Gelețu, G. L. (2023). Managing Predicted Post-Orthognathic Surgical Defects Using Combined Digital Software: A Case Report. Healthcare (Basel, Switzerland), 11(9), 1219.

Ortega Beltrá, N., Matarredona Quiles, S., Martín Arroyo, M., & Pons Rocher, F. (2021). Mandibular osteoma as a cause of ankylosis and progressive trismus. BMJ case reports, 14(9), e244014.

Ostrofsky, M., Morkel, J. A., & Titinchi, F. (2019). Osteoma of the mandibular condyle: a rare case report and review of the literature. Journal of stomatology, oral and maxillofacial surgery, 120(6), 584–587.

Putro, Y. A. P., Magetsari, R., Taroeno-Hariadi, K. W., Dwianingsih, E. K., Pribadi, A. W., & Sukotjo, K. K. (2023). Classic and rare manifestations of multiple osteoma: A case report. International journal of surgery case reports, 110, 108713.

Serrano, D. R., Kara, A., Yuste, I., Luciano, F. C., Ongoren, B., Anaya, B. G., et al. (2023). 3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals. Pharmaceutics , 313.

Stelt, V. D., Verhulst, A. C., Vas Nunes, J. H., Koroma, T. A., Nolet, W. W., Slump, C. H., et al. (2020). Improving Lives in Three Dimensions: The Feasibility of 3D Printing for Creating Personalized Medical Aids in a Rural Area of Sierra Leone. The American journal of Tropical medicine and Hygine , 905-909.

Sun, Z., Wong, H. Y., & Yeong, H. C. (2023). Patient-Specific 3D-Printed Low-Cost Models in Medical Education and Clinical Practice. Micromachines, 14-56.

Taketomi, T., Imayama, K., Nakamura, K., & Kusukawa, J. (2023). An Isolated Laminar Osteoma Arising in the Maxillary Sinus. The American journal of case reports, 24, e938904.

Talmazov, G., Bencharit, S., Waldrop, T. C., & Ammoun, R. (2020). Accuracy of Implant Placement Position Using Nondental Open-Source Software: An In Vitro Study. Journal of prosthodontics: official journal of the American College of Prosthodontists, 29(7), 604–610.

Tarsitano, A., Ricotta, F., Spinnato, P., Chiesa, A. M., Di Carlo, M., Parmeggiani, A., Miceli, M., & Facchini, G. (2021). Craniofacial Osteomas: From Diagnosis to Therapy. Journal of clinical medicine, 10(23), 5584.

Tawashi, Y., Tawashi, K., Beski, T., & Alhakeem, K. (2023). Exophthalmos and hemiheadache caused by osteoma in the greater wing of sphenoid bone: an extremely rare case report. Annals of medicine and surgery (2012), 85(5), 2052–2055.

Vitorino, N. D. S. (2020). Uso de ferramenta de software livre no diagnóstico e tratamento tridimensional das deformidades dento-faciais.

Woertler K. (2003). Benign bone tumors and tumor-like lesions: value of cross-sectional imaging. European radiology, 13(8), 1820–1835.

Wolf-Grotto, I., Nogueira, L. M., Milani, B., & Marchiori, E. C. (2022). Management of giant osteoma in the mandible associated with minor trauma: a case report. Journal of medical case reports, 16(1), 8.

Xia, J. J., Phillips, C. V., Gateno, J., Teichgraeber, J. F., Christensen, A. M., Gliddon, M. J., Lemoine, J. J., & Liebschner, M. A. (2006). Cost-effectiveness analysis for computer-aided surgical simulation in complex cranio- maxillofacial surgery. Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 64(12), 1780–1784.

Yamasoba, T., Harada, T., Okuno, T., & Nomura, Y. (1990). Osteoma of the middle ear. Report of a case. Archives of otolaryngology--head & neck surgery, 116(10), 1214–1216.

Zeller, A. N., Neuhaus, M. T., Fresenborg, S., Zimmerer, R. M., Jehn, P., Spalthoff, S., Gellrich, N. C., & Dittmann, J. A. (2021). Accurate and cost-effective mandibular biomodels: a standardized evaluation of 3D- Printing via fused layer deposition modeling on soluble support structures. Journal of Stomatology, Oral and Maxillofacial Surgery, 122(4), 355–360.

Navegação em software livre e impressão 3D aplicada ao tratamento de osteoma mandibular

Autores

DOI:

Palavras-chave:

Resumo

Referências

Downloads

Publicado

Como Citar

Edição

Seção

Licença

JOURNAL METRICS

Idioma

Enviar Submissão