Influence of hydrofluoric acid etching time on the prosthetic adhesion of vitreous ceramics: a systematic review
DOI:
https://doi.org/10.33448/rsd-v10i2.12240Keywords:
Ceramics; Crowns; Acid Etching, Dental; Hydrofluoric Acid; Adhesiveness.Abstract
Objective: The objective was to evaluate the influence of the hydrofluoric acid (HF) etching time in different vitreous ceramics, in order to establish the best protocol that enables an adequate prosthetic adhesion of the restorative material. Methodology: This is a systematic review of in vitro studies. For its realization, the descriptors "Veneers", "Crowns", "Ceramics", "Ceramic", "Etching Time", "Application Time", "Surface Treatments", "Hydrofluoric Acid" and "Adhesion" were used in the Scopus, PubMed, Cochrane Library, SciElo, Web of Science and Lilacs bases. Studies that investigated the effects of the application time of HF on the adhesion of vitreous ceramics were included. The level of evidence for the selected articles followed the principles of the Oxford Center for Evidence-Based Medicine. This review followed the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-analyzes (PRISMA). Results: The search strategy resulted in 290 studies, of which 5 were included in the review. The studies demonstrated different evaluative parameters such as microstructural roughness, wettability, shear strength, biaxial flexural strength and microhardness of ceramics, in order to investigate the influence of HF etching time on vitreous ceramics, including feldspar, of lithium silicate reinforced by zirconia and lithium disilicate. Etching with HF for 60s is recommended for feldspathic ceramics, while for lithium silicate ceramics reinforced by zirconia and lithium disilicate it is indicated for 20s. Conclusion: The etching time of the ceramic with HF influences the adhesion. Prolonged etching times are detrimental to vitreous ceramics, reflecting a reduction in prosthetic adhesion.
References
Bajraktarova-Valjakova, E., Grozdanov, A., Guguvcevski, L., Korunoska-Stevkovska, V., Kapusevska, B., Gigovski, N., Mijoska, A., & Bajraktarova-Misevska, C. (2018). Acid Etching as Surface Treatment Method for Luting of Glass-Ceramic Restorations, part 1: Acids, Application Protocol and Etching Effectiveness. Open Access Macedonian Journal of Medical Sciences, 6(3), 568-573. https://doi.org/10.3889/oamjms.2018.147
Barchetta, N. F., Amaral, M., Prochnow, C., Rodrigues, F. P., Bottino, M. A., Valandro, L. F., & Melo, R. M. (2019). Strength of a Zirconia-Reinforced Lithium Silicate Ceramic: Acid-Etching Time and Resin Cement Application Effects. The International Journal of Periodontics & Restorative Dentistry, 39(3), 431-437. https://doi.org/10.11607/prd.4117
Chen, J. H., Matsumura, H., & Atsuta, M. (1998). Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. Journal of Dentistry, 26(1), 53-58. https://doi.org/10.1016/S0300-5712(96)00078-4
Colombo, L. A., Murillo-Gómez, F., & De Goes, M. F. (2019). Bond Strength of CAD/CAM Restorative Materials Treated with Different Surface Etching Protocols. The Journal of Adhesive Dentistry, 21(4), 307-317. https://doi.org/ 10.3290/j.jad.a42931
El-Damanhoury, H. M., & Gaintantzopoulou, M. D. (2018). Self-etching ceramic primer versus hydrofluoric acid etching: Etching efficacy and bonding performance. Journal of Prosthodontic Research, 62(1), 75-83. https://doi.org/10.1016/j.jpor.2017.06.002
Fonzar, R. F., Goracci, C., Carrabba, M., Louca, C., Ferrari, M., & Vichi, A. (2020). Influence of Acid Concentration and Etching Time on Composite Cement Adhesion to Lithium-silicate Glass Ceramics. The Journal of Adhesive Dentistry, 22(2), 175-182. https://doi.org/10.3290/j.jad.a44282
França, R., Bebsh, M., Haimeur, A., Fernandes, A. C., & Sacher, E. (2020). Physicochemical surface characterizations of four dental CAD/CAM lithium disilicate-based glass ceramics on HF etching: An XPS study. Ceramics International, 46(2), 1411-1418. https://doi.org/10.1016/j.ceramint.2019.09.105
Guyatt, G. H., Oxman, A. D., Vist, G. E., Kunz, R., Falck-Ytter, Y., Alonso-Coello, P., & Schünemann, H. J. (2008). GRADE: an emerging consensus on rating quality of evidence and strength of recommendations. Bmj, 336(7650), 924-926.
Howick, J., Chalmers, I., Glasziou, P., Greenhalgh, T., Heneghan, C., Liberati, A., & Thornton, H. (2011). The 2011 Oxford CEBM evidence levels of evidence (introductory document). Oxford Center for Evidence Based Medicine.
Liu, D., Tsoi, J. K. H., Pow, E. H. N., & Wong, H. M. (2015). Influence of different etching protocols on the reliability of resin bonding to CAD/CAM feldspathic porcelain. International Journal of Adhesion and Adhesives, 62, 18-24. https://doi.org/10.1016/j.ijadhadh.2015.06.007
Miranda, J. S., Monteiro, J. B., Silva, P. N. F., Valera, M. C., Bresciani, E., & Melo, R. M. (2020). Can different etching protocols change the properties of a hybrid ceramic? General Dentistry, 68(2), 20-25. PMID: 32105221.
Moher, D., Liberati, A., Tetzlaff, J., Altman, D. G., & Prisma Group. (2009). Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement. PLoS med, 6(7), e1000097.
Mokhtarpour, F., Alaghehmand, H., & Khafri, S. (2017). Effect of hydrofluoric acid surface treatments on micro-shear bond strength of CAD/CAM ceramics. Electronic Physician, 9(10), 5487-5493. http://dx.doi.org/10.19082/5487
Monteiro, J. B., Oliani, M. G., Guilardi, L. F., Prochnow, C., Pereira, G. K. R., Bottino, M. A., Melo, R. M., & Valandro, L. F. (2018). Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration. Journal of the Mechanical Behavior of Biomedical Materials, 77, 375-382. https://doi.org/10.1016/j.jmbbm.2017.09.028
Moura, D. M. D., Araújo, A. M. M., Souza, K. B., Veríssimo, A. H., Tribst, J. P. M., & Souza, R. O. A. (2020). Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics. Brazilian Oral Research, 34, 1-10. http://dx.doi.org/10.1590/1807-3107bor-2020.vol34.0018
Murillo-Gómez, F., Palma-Dibb, R. G., & De Goes, M. F. (2018). Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials. Dental Materials, 34(6), 944-955. https://doi.org/10.1016/j.dental.2018.03.013
Naves, L. Z., Soares, C. J., Moraes, R. R., Gonçalves, L. S., Sinhoreti, M. A. C., & Correr-Sobrinho, L. (2010). Surface/Interface Morphology and Bond Strength to Glass Ceramic Etched for Different Periods. Operative Dentistry, 35(4), 420-427. https://doi.org/10.2341/09-152-L
Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia da pesquisa científica. [e-book]. Santa Maria. Ed (pp. 67-74). UAB/NTE/UFSM. Disponível em: https://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_Metodologia-Pesquisa-Cientifica. pdf.
Puppin-Rontani, J., Sundfeld, D., Costa, A. R., Correr, A. B., Puppin-Rontani, R. M., Borges, G. A., Sinhoreti, M. A. C., & Correr-Sobrinho, L. (2017). Effect of Hydrofluoric Acid Concentration and Etching Time on Bond Strength to Lithium Disilicate Glass Ceramic. Operative Dentistry, 42(6), 606-615. https://doi.org/10.2341/16-215-L
Ramakrishnaiah, R., Alkheraif, A. A., Divakar, D. D., Matinlinna, J. P., & Vallittu, P. K. (2016). The Effect of Hydrofluoric Acid Etching Duration on the Surface Micromorphology, Roughness, and Wettability of Dental Ceramics. International Journal of Molecular Sciences, 17(6), 822. https://doi.org/10.3390/ijms17060822
Silva Neto, J. M. A., Furtado, K. R. S., Baumberger, M. C. A., Duarte, I. K. F., Trujillo, A. M., Alves, E. V. R., Medeiros, M. L. B. B., Cavalcanti, T. C., Vanderlei, A. D., Figueiredo, B. C., & Amaral, A. L. C. (2020). Cerâmicas odontológicas: Uma revisão de literatura. Revista Eletrônica Acervo Saúde, (40), e2416-e2416. https://doi.org/10.25248/reas.e2416.2020
Souza, R. O. A., & Bottino, M. A. (2018). Cimentação adesiva em próteses cerâmicas: o que realmente eu preciso saber? PróteseNews, 5(5), 516-531.
Straface, A., Rupp, L., Gintaute, A., Fischer, J., Zitzmann, N. U., & Rohr, N. (2019). HF etching of CAD/CAM materials: influence of HF concentration and etching time on shear bond strength. Head & Face Medicine, 15(21), 1-10. https://doi.org/10.1186/s13005-019-0206-8
Sudré, J. P., Salvio, L. A., Baroudi, K., Sotto-Maior, B. S., Melo-Silva, C. L., & Assis, N. M. S. P. (2020). Influence of Surface Treatment of Lithium Disilicate on Roughness and Bond Strength. The International Journal of Prosthodontics, 33(2), 212-216. https://doi.org/10.11607/ijp.6453
Thiesen, K. P. P. R., Souza, M. D. B., Schmitt, V. L., Nahsan, F. P. S., & Naufel, F. S. (2019). Bond strength to ZLS ceramics at different etching times and cementation protocols after aging. Brazilian Dental Science, 22(4), 488-496. https://doi.org/10.14295/bds.2019.v22i4.1816
Veríssimo, A. H., Moura, D. M. D., Tribst, J. P. M., Araújo, A. M. M., Leite, F. P. P., & Souza, R. O. A. (2019). Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics. Brazilian Oral Research, 33, 1-11. https://doi.org/10.1590/1807-3107bor-2019.vol33.0041
Vila-Nova, T. E. L., Silva, N. R., Moura, D. M. D., Araújo, G. M., Miranda, L. M., Carvalho, I. H. G., Souza, K. B., Silva, S. E. G., & Souza, R. O. A. (2019). Cimentação adesiva em cerâmicas vítreas: Condicionamento e limpeza pós-condicionamento. Parte I. PróteseNews, 6(5), 587-590.
Wong, A. C. H., Tian, T., Tsoi, J. K. H., Burrow, M. F., & Matinlinna, J. P. (2017). Aspects of adhesion tests on resin–glass ceramic bonding. Dental Materials, 33(9), 1045-1055. https://doi.org/10.1016/j.dental.2017.06.013
Zogheib, L. V., Bona, A. D., Kimpara, E. T., & Mccabe, J. F. (2011). Effect of hydrofluoric acid etching duration on the roughness and flexural strength of a lithium disilicate-based glass ceramic. Brazilian Dental Journal, 22(1), 45-50. https://doi.org/10.1590/S0103-64402011000100008
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Laís Ferrante de Faria; Millena Silva Cardoso; Camila Moreira Lima; Laércio Almeida de Melo; Fabíola Pessôa Pereira Leite
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.