Base plate: Interface between steel and concrete

Authors

  • Pedro Emílio Amador Salomão Faculdade Presidente Antônio Carlos
  • Délcio Lehmann Júnior Faculdade Presidente Antônio Carlos
  • Larissa Petrini Alves Lorentz Faculdade Presidente Antônio Carlos
  • Larissa Tatiane Gonçalves de Paula Faculdade Presidente Antônio Carlos

DOI:

https://doi.org/10.33448/rsd-v8i9.1267

Keywords:

base plates; pathologies; metallic structure

Abstract

A piece of great importance in the metallic structure, the base plates, pass unnoticed by the public eye in general, it justifies the nonobservance even by the place where they work that after finishing the structure they become invisible pieces, with a paper the whole of the structure, whereby they pass all the load directed to the foundation and are not always and given the due attention, which, once settled, become almost irreplaceable  and can in a short time cause serious structural problems causing damages and damaging the image of metal construction has enormous potential for growth in Brazil. In this study, we will present test results that demonstrate how these pieces work and how, if poorly designed, they potentiate future pathologies. These tests will be comparative only for visualization of the problematic involving these elements.

References

DEWOLF, J. T. & RICHER, D. T (1990). Column Base Plates, Steel Design Guides Series 1, American Institute of Steel Construction, Chicago.

PIMENTA, Roberval José et at. (2010) – Ligações de apoio de pilares em perfil tubular. CONSTRUMETAL 2010 – Congresso Latino Americano da Construção Metálica. São Paulo – Brasil – 31 de agosto a 2 de setembro.

PINHEIRO, Antonio Carlos da Fonseca Bragança (2005) – estruturas metálicas, detalhes, exercícios e projetos. São Paulo: Edgard Blucher, 2005.

Siqueira, R. A., Silva, A. J. M., Ribeiro, P. T., & Salomão P. E. A. (2018). ANÁLISE COMPARATIVA ENTRE O CONCRETO USINADO E O CONCRETO PRODUZIDO NO CANTEIRO DE OBRA. Revista Multidisciplinar do Nordeste Mineiro–Unipac ISSN, 2178, 6925.

Salomão, P. E. A., Suski, A., Pinheiro, W. F., & Lopes, A. A. (2019). Estudo de proteção contra corrosão em armaduras de aço da construção civil. Research, Society and Development, 8(1), 15.

HALLAL, Ricardo, Fakury; CASTRO, Ana Lydia Reis e silva; CALDAS, Rodrigo Barreto (2016). – Dimensionamento de elementos estruturais de aço e mistos de aço e concreto, São Paulo Pearson Education do Brasil.

Bellei, Ildony H, Edificios de múltiplos andares em aço / Ildony H. Bellei, Fernando O. pinho, Mauro O. Pinho, 2. Ed. São Paulo: Pini 2008.

ASSOCIAÇÃO BRASILEIRA DE NORMAS TECNICAS – NBR 8800, Projeto de estruturas de aço e de estruturas mista aço e concreto de edifícios. 2008.

Downloads

Published

14/06/2019

How to Cite

SALOMÃO, P. E. A.; LEHMANN JÚNIOR, D.; LORENTZ, L. P. A.; PAULA, L. T. G. de. Base plate: Interface between steel and concrete. Research, Society and Development, [S. l.], v. 8, n. 9, p. e13891267, 2019. DOI: 10.33448/rsd-v8i9.1267. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/1267. Acesso em: 23 dec. 2024.

Issue

Vol. 8 No. 9

Section

Engineerings

License

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.