The use of the CAD/CAM system in the previous aesthetic resolution of a patient with different substrates

Authors

DOI:

https://doi.org/10.33448/rsd-v10i3.13491

Keywords:

dental substrates; CAD-CAM; Ceramics; ceramic; Color; Esthetics dental; Mouth rehabilitation.

Abstract

Currently in dentistry, there are treatments that combine not only aesthetics and longevity, but also ease of execution and consequently saving time. The objective of this work is to demonstrate, through a clinical case report, the ability of the CAD/CAM CEREC (Ceramic Reconstruction) system to mimic the dental structure and standardize the dental substrate in the final result. The present study reports the preparation of previous restorations (13, 12, 11, 21, 22 and 23) in lithium disilicate (e.max - Ivoclar vivadent), in a female patient, 50 years old, with different dental substrates, through complete office systems (chair side). As results obtained: clinical steps successfully achieved, excellent adaptations of the pieces, mimicment of the dental structures, results in ceramic restorations of excellence, well indicated, qualified and aesthetically pleasing, which was the main reason why the patient attended.

References

Alves, V. (2017). Vantagens x desvantagens do sistema CAD/CAM. Brazilian Journal of Surgery and clinical Research, 18(1), 106-109.

Chang, J., Da Silva, J. D., Sakai, M., Kristiansen, J., & Ishikawa-Nagai, S. (2009). The optical effect of composite luting cement on all ceramic crowns. Journal of dentistry, 37(12), 937-943.

Correia, A. R. M., Fernandes, J. C. A. S., Cardoso, J. A. P., & Silva, C. F. C. L. (2013). CAD-CAM: a informática a serviço da prótese fixa. Revista de Odontologia da UNESP, 35(2), 183-189.

Cruz, E. M. (2018). Sistemas CAD/CAM na Odontologia.

Dartora, G., Dartora, N., Radaelli, M. B., Alessandretti, R., Spazzin, A. O., & Bacchi, A. (2014). Precisão dos sistemas CAD/CAM em restaurações unitárias: revisão de literatura. Prosth. Lab. Sci, 3(10), 133-139.

Hilgert, L. A. (2009). Influência da coloração do substrato, espessura e translucidez da cerâmica na cor de facetas laminadas produzidas com o sistema CEREC InLab.

Maroli, A., Federizzi, L., Spazzin, A. O., & Radaelli, M. T. B. (2019). Comparação estética entre sistemas cerâmicos sobre substrato escurecido. Journal of Oral Investigations, 8(1), 69-85.

Martins, L. D. M. (2011). Confiabilidade de coroas de dissilicato de lítio com diferentes espessuras sob fadiga (Doctoral dissertation, Universidade de São Paulo).

Moura, R. B. B., & Santos, T. C. (2015). Sistemas cerâmicos metal free: tecnologia CAD/CAM-revisão de literatura. Revista Interdisciplinar, 8(1), 220-226.

Pedroche, L. O., Bernardes, S. R., Leao, M. P., Kintopp, C. C. D. A., Correr, G. M., Ornaghi, B. P., & Gonzaga, C. C. (2016). Marginal and internal fit of zirconia copings obtained using different digital scanning methods. Brazilian oral research, 30(1).

Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia da Pesquisa Científica-Licenciatura em Computação. UFSM.

Published

25/03/2021

How to Cite

ALMEIDA, L.; SANTANA, S. C.; NAUFEL, F. S.; SCHMITT, V. L.; LUZZI, L. I. T.; PICCOLOTTO, A. The use of the CAD/CAM system in the previous aesthetic resolution of a patient with different substrates . Research, Society and Development, [S. l.], v. 10, n. 3, p. e53410313491, 2021. DOI: 10.33448/rsd-v10i3.13491. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/13491. Acesso em: 22 nov. 2024.

Issue

Section

Health Sciences