Evaluation of mixing processes of pervious concrete with pebbles
DOI:
https://doi.org/10.33448/rsd-v10i4.14205Keywords:
Permeable concrete; Mixing sequence; Control variable.Abstract
The increasing waterproofing of urban spaces brings environmental problems and disasters, such as flooding, resulting from changes in rainwater that seep and pass, requiring greater capacity of micro and macro drainage systems. Permeable concrete (CPER), composed of Portland cement and coarse aggregate, gains space as a way to mitigate the effects of reducing permeable areas. In this context, the present work seeks to investigate the influence of the mixing sequence on the hydraulic and mechanical behavior of the roll-milled CPER, given the presence of gaps in the literature about the impact of these parameters on the material. For this, three sequences of mixtures were studied from the production of CPER plates of dimensions 40cmx40cmx10cm. The results of resistance to flexural alteration, porosity, tortuosity and permeability were analyzed. Statistically, no differences were found between the results, however, reduced the volume growth and pore area, changing as sequences when used in the production of concrete or inclined shaft mixer.
References
ABNT (2015) - NBR 16416: Pavimentos permeáveis de concreto – Requisitos e procedimentos. Associação Brasileira de Normas Técnicas, Rio de Janeiro.
ABNT (2003) - NBR NM 248: Agregados - Determinação da composição granulométrica. Associação Brasileira de Normas Técnicas, Rio de Janeiro.
ABNT (2006) - NBR NM 45: Agregados - Determinação da massa unitária e do volume de vazios. Associação Brasileira de Normas Técnicas, Rio de Janeiro.
ABNT (2009) - NBR NM 53: Agregados graúdo - Determinação da massa específica, massa específica aparente e absorção de águas. Associação Brasileira de Normas Técnicas, Rio de Janeiro.
ABNT (2010) - NBR 12142: Concreto - Determinação da resistência à tração de corpos de prova prismáticos. Associação Brasileira de Normas Técnicas, Rio de Janeiro.
Agar-Ozbek, A. S., Weerheijm, J., Schlangen, E. & Van Breugel, K. (2013). Investigating porous concrete with improved strength: Testing at different scales. Revista. Construction and Building Materials. Vol 41, p. 480-490.
Batezini, R. (2013). Estudo preliminar de concretos permeáveis como revestimento de pavimentos para áreas de veículos leves. Dissertação de mestrado apresentada à Escola Politécnica da Universidade de São Paulo. São Paulo.
Bhutta, M.A.R., Tsuruta, K. & Mirza, J. (2012). Evaluation of high-performance porous concrete properties. Construction and Building Materials. Vol 31, p.67-73.
Bradley, P. & Andrew, N. (2011). Comparison of test specimen preparation techniques for pervious concrete pavements. Construction and Building Materials. Vol. 25, p. 3480–3485.
Castro, J.,Solminihac, H., Videla, C. & Fernandéz, B, (2009). Estudio de dosificaciones en laboratorio para pavimentos porosos de hormigón. Revista Ingenieria de Construccion. Vol. 24(3), p. 271-284.
Chandrappa, A. K. & Biligiri, K. P. (2018). Pervious concrete as a sustainable pavement material – Research findings and future prospects: A state-of-theart review. Construction and Building Materials. Vol. 111, p. 262–274.
Chen, Y., Wang, K. & Liang, D. (2012). Mechanical Properties of Pervious Cement Concrete, J. Cent. South Univ. Vol. 19, P. 3329–3334.
Chindapraist, P., Hatanaka, S., Chareerat, T., Mishima, N. & Yuasa, Y. (2008). Cement paste characteristics and porous concrete properties. Construction and Building Materials. Vol. 22, p. 894-901.
De Larrard, F. (1999). Concrete Mixture Proportioning - A Scientific Approach. Modern Concrete Technology Series, v. 9, E&FN SPON, London, 421 p.
Filho, M. (2017) Determinação da tortuosidade de arenitos e carbonatos utilizando florestas de caminhos ótimos. Tese de Doutorado apresentada à Uviversidade do Estadual de Campinas. São Paulo.
Koche, J. C. (2011). Fundamentos de metodologia científica. Petrópolis.
Laskar, I. (2011) Mix design of high-performance concrete. Materials Research. Vol. 14 (4): p. 429-433.
Lian, C., Zhuge, Y. & Beecham, S. (2011). The relationship between porosity and strength for porous concrete. Construction and Building Materials. Vol. 25, p.4294-4298.
Masoud, K., Dane, A., John T. & Eta, A. (2012). Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in park lots. Construction and Building Materials. Vol. 95, p. 114–123.
Matyka, M. & Koza, Z. (2012). How to Calculate Tortuosity Easily? AIP Conference Proceedings 1453, 17.
Mehta, P. K. & Monteiro, P. (2008). Concreto: microestrutura, propriedades e materiais. 3ª Ed. Ibracon, São Paulo.
Neto, B., Oliveira, C. & Ramos, D. (2011). Efeitos do tipo, tamanho e teor de agregado graúdo no módulo de deformação do concreto de alta resistência. Revista matéria, vol. 16 (2), p. 680-702.
Nicholas A., Hamid A. & Fatih A. (2016). Flexural strength and fracture size effects of pervious concrete. Construction and Building Materials. Vol. 113, p. 536–543.
Salomão, P. E. A., Porto, T. B., Cabrai, S. C., da Silva, W. L., & de Oliveira, A. N. S. (2018). Elaboration of tables for concrete dosage based on the aggregates used in Northeast Mineiro. Research, Society and Development, 7 (4), 1274305
Tennis, P., Leming, M. & Akers, D. (2004). Pervious concrete pavements. Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, Silver Spring, Maryland, USA.
Torres, A., Hu, J. & Ramos, A. (2015). The effect of the cementitious paste thickness on the performance of pervious concrete. Construction and Building Materials. Vol. 95, p.850-859.
Tucci, C. (2002). Gerenciamento da drenagem urbana. Revista Brasileira de recursos hídricos, Porto Alegre. Vol. 07, p. 5-27.
Tucci, C. (2009). Hidrologia: ciência e aplicação. Revista Brasileira de recursos hídricos, Porto Alegre. Vol. 07, p. 5-27.
Xu, G., Shen, W., Huo, X., Yang, Z.,Wang, J., Zhang, W. & Ji, X. (2018). Investigation on the properties of porous concrete as road base material. Construction and Building Materials. Vol 158, p. 141-148.
Zheng, M. (2004). Physical And Mechanical Performance Of Porous Concrete For Drainage Base. Tese De Pós-Doutorado. China.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Juliana Chaves Cordeiro; Denny Martins Freitas; Luciana de Nazaré Pinheiro Cordeiro; Arthur Aviz Palma e Silva
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.