The use of anatomical fiberglass posts as an alternative for an aesthetic improvement in rehabilitative treatments: literature review
DOI:
https://doi.org/10.33448/rsd-v10i15.22744Keywords:
Rehabilitation; Fiberglass pins; Aesthetics; Anatomical pins.Abstract
Introduction: In dentistry there are several challenges and an aesthetic and functional rehabilitation of teeth with coronary destruction is one of them. General Objective: to elucidate a literature review regarding esthetic and functional rehabilitation with anatomical fiber pins. Methodology: For the construction of this scientific article, a descriptive bibliographic review of the literature was used. Results and Discussion: When presented cases where there is a great loss in the tooth structure, the use of fiberglass posts is presented as an excellent alternative offering better support to rehabilitate the unit. Conclusion: we conclude that the technique used brings concrete benefits for both the professional and the patient. Because it has a modulus of elasticity close to dentin, thus enabling a better distribution of loads, as well as the risk of fractures.
References
Angelus. Pinos de Fibra de Vidro: Entenda as Principais Vantagens de Usar. blog.angelus.ind.br/pino-de-fibra-de-vidro/>.
Angelus. Splendo SAP: Angelus. .
Baratieri, L. N. (2001). Odontologia Restauradora Fundamentos e Possibilidades. 1 ed São Paulo: Santos, 739.
Barbosa, I. F., et al. (2016). Pinos de fibra: revisão de literatura. Revista Uningá Review. 28(1),83-87.
Barbosa, I. F., Barreto, B. C. T., Coelho, M. D. O., Pereira, G. D. D. S., & de Carvalho, Z. M. C. (2016). Pinos de fibra: revisão da literatura. Rev Uningá Review, 28(1), 83-7.
Boing, T. F et al. (2011). Avaliação do grau de conversão de uma resina composta utilizando diferentes tratamentos de superfície previamente à fotopolimerização final. Rev Dent online. 22, 9-14. http://coral.ufsm.br/dentisticaonline/1018.pdf.
Camarinha, S. M. L. B. (2008). Avaliação da adaptação de núcleo metálico fundido em função da técnica de moldagem. Dissertação (Mestrado em Reabilitação Oral). Faculdade de Odontologia de Ribeirão Preto, Universidade de São Paulo.
Chieffi, N., et al. (2007). The effect of application sustained seating pressure on adhesive luting procedure. Dent Mater, 23(2), 159-64.
Clavijo, Victor., & Kabbach, W. (2014). Pinos anatômicos: acredite nessa técnica. Clínica-International Journal of Brazilian Dentistry, Florianópolis, 10(1), 12- 21.
Corrêa, L. R. N., et al. (2017). Confecção de pino anatômico pela técnica semidireta. Revista rede de cuidados em saúde. 10(1). http://publicacoes.unigranrio.edu.br/index.php/rcs/article/view/4281/2240
Costa, D. D., Carvalho, L. C. B., Nery, F. S., Barbosa, P. A., Amado, D. S., & Cruz, J. S. W. (2011). Avaliação quantitativa do remanescente dentinário após instalação de pino de fibra de vidro em incisivos inferiores com raízes achatadas. Revista de Ciências Médicas e Biológicas, 10(1), 39-43. Salvador – BA.
Guiotti, F.A.; Guiotti, A.M.; Andrade, M.F.; KUGA, M.C.; Visão Contemporânea Sobre Pinos Anatômicos; Arch Health Invest.; n.3, v.2, p.64-73, 2014.
Iglesia-Puig, Arellano-Carbonero. Fiber-reinforced post and core adapted.
Mazaro, J. V. Q., Santos, A. B., Zavanelli, A. C., Mello, C. C., Lemos, C. A. A., Filho, H. G. (2014). Avaliação dos Fatores Críticos para Seleção e Aplicação Clínica dos Pinos de Fibra- Relato de Caso. Revista Odontológica de Araçatuba; 35(2), 26-36.
Mezzomo, E. (2002). Prótese fixa contemporânea. 1st ed. São Paulo: Santos.
Pegoraro, L, F., et al. (2013). Prótese Fixa: Bases Para o Planejamento em Reabilitação Oral. 2a Edição. Editora Artes Médicas.
Pereira, Jeferson Ricardo. (2011). Retentores Intra-radiculares. São Paulo: Artes Médicas.
Prado, M, A, A., et al. (2014). Retentores Intrarradiculares: Revisão de Literatura. UNOPAR Científica, Ciências Biológicas e da Saúde. 16(1), 51-55.
Sausen, B. P. (2011). Avaliação em mev da fenda de contração de polimerização entre pino de fibra de vidro e resina composta de baixa contração. 37 f. TCC (Graduação) - Curso de Odontologia, Universidade Federal do Rio Grande do Sul, Porto Alegre.
Scotti, R., & Ferrari, M. (2003). Pinos de Fibra: considerações teóricas e aplicações clínicas. 1. ed. São Paulo: Artes Médicas.
Shillingburg, H. T., Hobo, S., Whitsett, L. D., Jacobi, R., Brackett, S. E. (1998). Fundamentos de prótese fixa. 3rd ed. São Paulo: Quintessence.
Shillingburg H. T., Kessler J. C. (1991). Restauração de dentes tratados endodonticamente. São Paulo: Quintessence Publishing.
Silva, N. R. et al. (2009). Influ.ence of Different Post Design and Composition on Stress Distribution in Maxillary Central Incisor: Finite Element Analysis, Indian J Dent Res. 20, 2, 153- 8.
Smith, C. T., Schuman, N. J., & Wasson, W. (1998). Biomechanica criteria for evaluating prefabricated post-and-core systems: A guide for the restorative dentist. Quintes- sence Int., 29(5), 305-12.
Tanoue., N., et al. (2007). Application of a preimpregnated fiber-reinforced composite in the fabrication of an indirect dowelcore. J Oral Sci. 49, 179-182. https://www.ncbi.nlm.nih.gov/pubmed/17634733.
Teixeira, S. C., et al. (2009). Bond Strength of Fiber Posts to Weakened Roots After Resin Restoration With Different Light-Curing Times. JOE. 35(7), https://www.jendodon.com/article/S0099-2399(09)00362-8/fulltext.
Terry, D. A., Geller, W. (2014). Odontologia estética e restauradora. 2 ed. São Paulo: Editora Quintessence.
Velmurugan, N. (2004). Parameswaran A. Custom-made resin post and core. Oper Dent. 29(1),112-4.
Watzke, R., et al. (2008). Interface homogeneity of adhesively luted glass fiber posts. Dent. Mater., Kidlington, 24(11), 1512-1517, https://www.ncbi.nlm.nih.gov/pubmed/18466965.
WEISER, F., & BEHR, M. (2015). Self-adhesive resin cements: a clinical review. J Prosthodont. Feb,24(2), 100-8. https://www.ncbi.nlm.nih.gov/pubmed/25041496.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Manuela Moraes Meireles; Neusimar Queiroz Coelho; Gabriel Catunda de Souza

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.