Molar uprighting using mini-implant with a bracket like head with inverted thread: Case report
DOI:
https://doi.org/10.33448/rsd-v11i13.25505Keywords:
Verticalization; Miniscrew; Malocclusion.Abstract
Uprighting inclined molars, whether due to anodontics or premature loss of adjacent teeth, can be a challenge for orthodontists. There are many mechanics used to correct this inclination, but it is necessary to analyze the side effects that can be caused during the verticalization process. The present work deals with a case report where a root correction loop was chosen, activated in the VI geometry and associated with a mini inverted thread bracket head screw, a mechanic that brings a minimum of unwanted side effects.
References
Ahmad, P., Akhtar, U., Chaudhry, A., Rahid, U., Saif, S., & Asif, J. A. (2019). Repercussions of diabetes mellitus on the oral cavity. European Journal of General Dentistry, 8(3), 55. 10.4103/ejgd.ejgd_28_19
Alexander, S. A., Askari, M., & Lewis, P. (2015). The premature loss of primary first molars: space loss to molar occlusal relationships and facial patterns. The Angle Orthodontist, 85(2), 218-223.
Derton, N., Perini, A., Mutinelli, S., & Gracco, A. (2012). Mandibular molar uprighting using mini-implants: Different approaches for different clinical cases-Two case reports. ORTHODONTICS: The Art & Practice of Dentofacial Enhancement, 13(1).
Gameiro, G. H. (2020). The six geometries revisited: History, terminology and applications. Paper presented at the Seminars in Orthodontics.
Locks, A., Locks, R. L., & Locks, L. L. (2015). Diferentes abordagens para a verticalização de molares. Revista Clínica de Ortodontia Dental Press, 14(4).
Maciel, F. D. A., Lima, A. P. B., Mendes-Júnior, T. E., Mendes, T. E., Marchiori, G. E., & Paranhos, L. R. (2014). Aspectos clínicos relacionados à verticalização de molares. Revista da Faculdade de Odontologia-UPF, 19(2).
Maeda, S., Maeda, Y., Ono, Y., Nakamura, K., & Sasaki, T. (2005). Interdisciplinary treatment of a patient with severe pathologic tooth migration caused by localized aggressive periodontitis. American journal of orthodontics and dentofacial orthopedics, 127(3), 374-384.
Martins-Júnior, P. A., Ramos-Jorge, M. L., de Paiva, S. M., Pereira, L. J., & Marques, L. S. (2017). Premature deciduous tooth loss and orthodontic treatment need: a 6-year prospective study. Journal of Public Health, 25(2), 173-179.
Martires, S., Kamat, N. V., & Dessai, S. R. (2018). A CBCT evaluation of molar uprighting by conventional versus microimplant-assisted methods: an in-vivo study. Dental Press Journal of Orthodontics, 23, 35. e31-35. e39.
McABOY, C. P., Grumet, J. T., Siegel, E. B., & Iacopino, A. M. (2003). Surgical uprighting and repositioning of severely impacted mandibular second molars. The Journal of the American Dental Association, 134(11), 1459-1462.
Nunes, M. M. (2018). O uso de mini implantes ortodônticos como meio de ancoragem para verticalização de molares inferiores: revisão de literatura.
Park, H.-S., Kwon, O.-W., & Sung, J.-H. (2004). Uprighting second molars with micro-implant anchorage. Journal of Clinical Orthodontics, 38(2), 100-105.
Raveli, T. B., Raveli, D. B., de Mathias Almeida, K. C., & dos Santos Pinto, A. (2017). Molar uprighting: A Considerable and safe decision to avoid prosthetic treatment. The open dentistry journal, 11, 466.
Ruellas, A. C. d. O., Pithon, M. M., & Santos, R. L. d. (2013). Miniscrew-supported coil spring for molar uprighting: description. Dental Press Journal of Orthodontics, 18(1), 45-49.
Sakima, M. T., Dalstra, M., Loiola, A. V., & Gameiro, G. H. (2017). Quantification of the force systems delivered by transpalatal arches activated in the six Burstone geometries. The Angle Orthodontist, 87(4), 542-548.
Sakima, M. T., Sakima, P. R. T., Sakima, T., Gandini Júnior, L. G., & Pinto, A. d. S. (2000). Técnica do arco segmentado de Burstone. Rev. dent. press ortodon. ortop. maxilar, 91-115.
Silva, E. A., Tôrres, L. H. d. N., & Sousa, M. d. L. R. d. (2012). Perda dentária e o impacto na qualidade de vida em adultos usuários de duas Unidades Básicas de Saúde. Rev. odontol. UNESP (Online).
Tagawa, D. T., Abrão, A. F., Tornelli, H. R., Oliveira, R. C. B. d., Ogata, R., & Abrão, J. (2015). Verticalização do segundo molar inferior com mini-implante em paciente adulto-relato de caso clínico. Revista da Associacao Paulista de Cirurgioes Dentistas, 69(1), 50-54.
Turley, P. K. (2020). The management of mesially inclined/impacted mandibular permanent second molars. Journal of the World Federation of Orthodontists, 9(3), S45-S53.
Vasconcelos, M. B., da Silva, J. G., da Silva Pedrosa, M., Nascimento, R. M. B. L., Carvalho, M. R. A., & Lopes, M. R. L. V. M. (2018). Mesialização de molares com ancoragem em mini-implantes e braço de força. Ortho Sci., Orthod. sci. pract, 92-98.
Wilmes, B., Vasudavan, S., & Drescher, D. (2019). Maxillary molar mesialization with the use of palatal mini-implants for direct anchorage in an adolescent patient. American journal of orthodontics and dentofacial orthopedics, 155(5), 725-732.
Yamaguchi, M., Inami, T., Ito, K., Kasai, K., & Tanimoto, Y. (2012). Mini-implants in the anchorage armamentarium: new paradigms in the orthodontics. International journal of biomaterials, 2012.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Ingridy Silva Lima Muniz; Tayanne Silva Gonçalves Viana; Lara Guabiraba da Silva; Betânia Pessoa Lima; Marcus Barreto Vasconcelos; Maura Régia Lima Verde Moura Lopes
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
