Displacement of the positions obtained with the PPP – IBGE caused by changes in transformation parameters between IGb08 and SIRGAS2000
DOI:
https://doi.org/10.33448/rsd-v11i5.27905Keywords:
ITRF; IGb08; Helmert transform; Precise point positioning.Abstract
In this work we have investigated the displacement in coordinates processed by the PPP-IBGE before 17/05/2020, when the IBGE adopted new transformation parameters between IGb08 and SIRGAS2000. The parameters Applied until the former date considered 3 translations, 1 scale fator and 3 rotations between both geodetic reference systems. The parameters adopted after 15/05/2020 not only show slightly diferences in translations but also adopted null rotations, that is, both systems were considered to be parallel. For demonstration purpose, we used data processed by the PPP-IBGE in 2016, before the change in parameters. The coordinates converted from IGb08 to SIRGAS2000 using both set of parameters were calculated and compared, and the resulting displacement was ~ 3 cm, as expected by the IBGE. Therefore, in all those cases in which the precision has not to be better than 3 cm the change in parameters can be neglected.
References
Bomford, G. (1971). Geodesy. Oxford.
Costa, S. M. A. (1999). Integração da Rede Geodésica Brasileira aos Sistemas de Referência Terrestres. Tese de Doutorado. CPGCG – UFPR.
Dalazoana, R. (2001). Implicações na cartografia com a evolução do Sistema Geodésico Brasileiro e futura adoção do SIRGAS. Dissertação de Mestrado. CPGCG – UFPR.
Dalazoana, R. & Freitas, S. R. C. (2002). Efeitos na cartografia devido à evolução do Sistema Geodésico Brasileiro e adoção de um referencial geocêntrico. Revista Brasileira de Cartografia. 2 (4), 66-76.
Drewes, H.; Dodson, A.; Fortes, L. P. S.; Sánche, L. & Sandoval, P. (1999). Vertical reference systems, IAG Series 124. Springer.
Gemael, C. (1999). Geodésia física. UFPR.
IBGE - INSTITUTO BRASILEIRO DE GEOGRAFIA E ESTATÍSTICA. (2022). IBGE-PPP: https://www.ibge.gov.br/geociencias/informacoes-sobre-posicionamento-geodesico/servicos-para-posicionamento-geodesico/16334-servico-online-para-pos-processamento-de-dados-gnss-ibge-ppp.html?=&t=processar-os-dados.
Jekeli, C. (2006). Geometric Reference Systems in Geodesy. The Ohio State University.
Krakiwsky, E. J. & Wells, D. E. (1971). Coordinate Systems in Geodesy. University of Brunswick.
Krakiwsky, E. J. & Thomson, D. B. (1974). Geodetic position computations. University of Brunswick.
Lu, Z. & Qu. Y. (2014). Geodesy: introduction to Geodetic datum and Geodetic Systems. Springer-Verlag.
Maling, D. H. (1992). Coordinate Systems and Map Projections. Oxford.
Monico, J. F. G. (2008). Posicionamento pelo GNSS, descrição, fundamentos e aplicações, 2° Ed. Unesp.
Oliveira, A. P. & Statella, T. (2017). Implantação de estação planimétrica geodésica nas dependências do campus Bela Vista do Instituto Federal de Educação, Ciência e Tecnologia de Mato Grosso (IFMT). Revista Brasileira de Geomática, 5 (4), 543-560.
Pereira A. S. et al. (2018). Metodologia da pesquisa científica.
Rapp, R. H. (1991a). Geometric Geodesy, Part 1. The Ohio State University.
Rapp, R. H. (1991b). Geometric Geodesy, Part 2. The Ohio State University.
Sapucci, L.F. & Monico, J. F. G. (2001). Transformação de Helmert Generalizada no Posicionamento de Alta Precisão: Fundamentação Teórica e Exemplificações. Revista Brasileira de Geofísica, 18 (12), 161-172.
Seeber, G. (2003). Satelite geodesy: foudations, methods and applications. Walter de Gruyter.
Torge, W. (2001). Geodesy. Walter de Gruyter.
Vanicek, P. & Krakiwsky, E. J. (1986). Geodesy: the concepts. Elsevier.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Thiago Statella; Patrícia Regina da Silva Gonçalves
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.