Colored compomer properties - in vitro study

Authors

DOI:

https://doi.org/10.33448/rsd-v11i12.33987

Keywords:

Dental materials; Deciduous tooth; Compomers; Composite resins; Pediatric dentistry.

Abstract

Restorative treatment in pediatric dentistry requires a restorative material that has good mechanical properties and is easy to handle and use. Colored compomers for restoration of deciduous teeth are a form of motivation for children in dental treatment, helping them to accept treatment. The objective of this work was to evaluate the surface hardness, compressive and bond strengths of colored compomers. For this, specimens of colored twinky star flow compomers in blue and pink colors (n=15) and bulk fill flow resin were made. To evaluate the bond strength, specimens of colored compomers (twinky star flow in blue) and bulk fill flow resin with were made on bovine enamel (n=16). All were individually conditioned in distilled water for 72 hours in an oven at 37ºC. The values obtained were submitted to the Shapiro-Wilk, Levene tests and one-way analysis of variance. The significance level adopted in all analyzes was 5%. There was no statistically significant difference between the restorative materials in surface hardness, compressive and bond strengths. The pigmentation of the compomers does not interfere in values of surface hardness, compression and bond strength.

References

Arias E. P. S. (2018). Avaliação do grau de conversão, dureza e módulo de elasticidade de resinas compostas Bulk Fill. Dissertação de mestrado em odontologia. 50f

Arora V., Arora P., Srivastava N., & Togoo R. A. (2014). Multicoloured Restorations for Pediatric Dental Patients. British J Appl Sci & Tech, 4(28), 4014-4025

Avendaño, A. K. C., Salas, B. S. P., Peña, E. A. M., & Rojas, M. J. A. (2016). Comportamiento de los compómeros y composites en restauraciones de dientes posteriores: una revisión sistemática. Ver Venez Invest Odont IADR, 4(2), 234-252

Avşar, A., & Tuloglu N. (2010). Effect of different topical fluoride applications on the surface roughness of a colored compomer. Journal of Applied Oral Science, 18(2), 171-177

Bacchi, A. C., Bacchi, A. C., & Anziliero, L. (2013). O cimento de ionômero de vidro e sua utilização nas diferentes áreas odontológicas. Perspectiva, 37(137), 103-114

Bakkal, M., Yilmaz, B., Durmus, A., Dumus, Z., & Ozalp, S. (2019). Polymerization characteristics of colored compomers cured with different LED units. Journal of Applied Biomaterials &Functional Materials, 17(1), 2280800019827805

Balkaya, H., & Arslan, S. (2020). A two-year clinical comparison of three different restorative materials in class II cavities. Operative dentistry, 45(1), 32-42

Bayne, S. C., Thompson, J. Y., Swift, Jr E. J., Stamatiades, P., & Wilkerson, M. (1998). A characterization of first-generation flowable composites. J Am Dent Assoc, 129(5), 567-77

Berg, J. H. (1998). The continuum of restorative materials in pediatric dentistry: a review for the clinician. Pediatr Dent, 20(2), 93-100

Brito, A. C. R., Cintia, F. C., & Gouvêa, C. V. D. (2007). Avaliação comparativa da resistência à compressão entre uma resina composta direta e duas resinas laboratoriais. Pesquisa brasileira em odontopediatria e clínica integrada, 7(2), 145-148

Chammas, M. B., Valarini, N., Maciel, S. M., Poli-Frederico, R. C., Navarro, P. V. P. O., & Conti, A. C. C. F. (2009). Resistência à compressão de cimentos de ionômero de vidro restauradores encapsulados. Cient. Biol. Saúde, 11(4), 35-8

Charamba, C. F., Meireles, S. S., Duarte, R. M., Montenegro, R. V., & Andrade, A. K. M. (2017). Resistência de união de compósitos do tipo Bulk Fill: análise in vitro. Rev odontol UNESP, 46(2), 77-81

Croll, T. P. (2002). MagicFil: A colourful kiddie compomer. Compend Contin Educ Dent, 23, 1044-6

Croll, T. P., Helpin, M. L., & Ponkly, K. J. (2004). Multi-coloured dual cured-compomer. Pediatr Dent, 26, 273-6

Dapieve, J. V., Souza, F. H. C., Júnior, C. A. K., Campos, L. M., Leites, A. R., Demarco, F. F., et al. (2005). Avaliação da resistência à compressão de duas resinas compostas em diferentes espessuras. Stomatos, 11(20), 29-35

Didem, A., & Haluk, B. (2011). Conversion degrees of a colored compomer in different colors utilized by various curing times. J Dent Child, 78(13), 83-7

Durmus, Z., Durmus, A., Yilmaz, B., Bakkal, M., & Ozalp, S. (2019). Polymerization characteristics of colored compomers cured with different led units. J Appl Biomater Funct Mater, 17(1)

El-Kalla, I. H., & Godoy, F. G. (1999). Mechanical properties of compomer restorative materials. Operative dentistry, 24, 2-8

Ertugrul, F., Cogulu, D., Özdemir, Y., & Ersin, N. (2010). Comparison of Conventional versus Colored Compomers for Class II Restorations in Primary Molars: A 12-Month Clinical Study. Med Princ Pract, 19, 48–152

Fishman, R., Guelmann, M., & Bimstein, E. (2006). Children's selection of posterior restorative materials. J Clin Pediatr Dent, 31(1), 1-4

Hirayama, S., Iwai, H., & Tanimoto, Y. (2014). Mechanical evaluation of five flowable resin composites by the dynamic micro-indentation method. J Dent Biomech, 5

Garcia, R. N., Werlich de Lucca, A. P., Da Costa, B. P. S., Gonçalves, F. C., Rafaeli J., & Dambros, P. C. (2016). Bond strength and degradation of self-adhesive flowable composite in dental substrates and a restorative composite. RFO, 21(1), 61-68

Jandt, K. D., Mills, R. W., Blackwell, G. B., & Ashworth, S. H. (2000). Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (Leds). Elsevier Science, 16, 41-47

Janiszewska-Olszowska, J., Tandecka, K., Szatkiewicz, T., Stępień, P., Sporniak-Tutak, K., & Grocholewicz, K. (2015). Three-dimensional analysis of enamel surface alteration resulting from orthodontic clean-up–comparison of three different tools. BMC Oral Health, 15(1), 1-7

Kelic, K., Matić, S., Marović, D., Klarić, E., & Tarle, Z. (2016). Microhardness of Bulk-Fill Composite Materials. Acta Clin Croat, 55(4), 607-614

Kramer, N., Lohbauer, U., & Frankenberger, R. (2007). Restorative materials in the primary dentition of poli-caries patients. Eur Arch Paediatr Dent, 8(1), 29-35

Martins, F., Delbem, A. C. B., Santos, L. R. A., Soares, H. L. O., & Martins, E. O. B. (2002). Microdureza de resinas em função da cor e luz halógena. Pesqui Odontol Bras, 16(3), 246-250

Melebari, L. A., Attas, S. E., & Arafa, A. (2019). The motivational effect of multicolored dental restoration on dental behavior of first preliminary school children. Clin Exp Dent Res, 5, 398-405

Menezes-Silva, R., Oliveira, B. M. B., Magalhães, A. P. R., Bueno, L. S., Borges, A. F. S., Baesso, M. L., et al. Correlation between mechanical properties and stabilization time of chemical bonds in glass-ionomer cements. Braz. Oral Ver. 2020; 34:e053.

Meyer J. M., Lorente C., & Dupuis V. (1998). Compomers: between glass-ionomer cements and composites. Elsevier Science, 19, 529-539

Moodley, D., & Grobler, S. R. (2003). Compomers: adhesion and setting reactions. SADJ: journal of the South African Dental Association = tydskrif van die Suid-Afrikaanse Tandheelkundige Vereniging, 58(1), 21–28

Moreno, V. B., Ribeiro, M., & Melo, A. T. (2000). Compômero: principais propriedades e indicações. Ver. Biociência. Taubaté, 6(2), 49-54

Neto J. M. A. S., Ferreira M. F., Barros Y. S., Souza V. P., Barros J. V. A. R. A, Santos J. K. B., et al. (2020). A estabilidade das resinas tipo bulk fill na dentística restauradora. reas/ejch, 58, e4085

Nicholson J. W. (2007). Polyacid-modified composite resins (“compomers”) and their use in clinical dentistry. Elsevier Sciense, 23, 615-622

Nigam, A. G., Jaiswal, J. N., Murthy, R. C., & Pandey, R. K. (2009). Estimation of Fluoride Release from Various Dental Materials in Different Media—An In Vitro Study. Int J of Clin Pediatr Dent, 2(1), 1-8

Oliveira, I. L. M., de Brito, O. F. F., & Maj, R. M. (2020). Microtensile Bond Strength of Bulk-fill Resin Composite Restorations in High C-factor Cavities. The Journal of Contemporary Dental Practice, 21(6), 626-631

Perdigão, J., Geraldeli, S., Heymann, H. O., & Rosa, B. T. (2000). Effect of conditioner and restorative resin on enamel bond strengths. Am J Dent, 13(2), 88-92

Rizzante, F. A. P., Duque, J. A., Duarte, M. A. H., Mondelli, R. F. L., Mendonça, G., & Ishikiriama, S. K. (2019). Polymerization shrinkage, microhardness and depth of cure of bulk fill resin composites. Dental materials jornal, 38(3), 403-410

Sabbagh, J., Fahd, J. C., Hajj, M., & Nahas, P. (2019). Les composites en monocouche ou bulk-fill Partie 2 -Propriétés physico-mécaniques et applications cliniques. Biomatériaux Cliniques, 2(1), 2-11

Silva, C. M., & Dias, K. R. H. C. (2009). Compressive strength of esthetic restorative materials polymerized with quartz-tungsten-halogen kight and blue led. Braz Dent J, 20(1), 54-57

Souza, A. L. T., Oliveira, F. M. M. P., Moysés, M. R., Assis, C. P., Ribeiro, J. C. R., & Dias, S. C. (2007). Avaliação da resistência à compressão de resinas compostas fotopolimerizáveis. Arquivos em Odontologia, 43(01), 30-35

Tedesco, T. K., Calvo, A. F. B., Yoshioka, L., Fukushima, K. A., Cesar, P. F., & Raggio, D. P. (2018). Does acid challenge affect the properties and bond stability of restorative materials on primary teeth? J. Adhes Dent, 20, 223-231

Van Meerbeek, B., De Munck, J., Yoshida, Y., Inoue, S., Vargas, M., Vijay, P., Van Landuyt, K., Lambrechts, P., & Vanherle, G. (2003). Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent, 28(3), 215-35

Vicenzi, C. B., & Benetti, P. (2018). Características mecânicas e ópticas de resinas bulk-fill: revisão de literatura. RFO, 23(1), 107-113

Zimmerli, B., Strub, M., Jeger, F., Stadler, O., & Lussi, A. (2010). Composite materials: composition, properties and clinical applications. Schweiz Monatsschr Zahnmed, 120, 972-979

Downloads

Published

06/09/2022

How to Cite

OLIVEIRA, G. G. de; DIAS, C. H. C. .; ARAGÃO, E. de C. D. .; CALVO, A. F. B. .; FLORIANO, I.; GIMENEZ, T.; TEDESCO, T. K. .; IMPARATO, J. C. P. . Colored compomer properties - in vitro study. Research, Society and Development, [S. l.], v. 11, n. 12, p. e34111233987, 2022. DOI: 10.33448/rsd-v11i12.33987. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/33987. Acesso em: 22 nov. 2024.

Issue

Vol. 11 No. 12

Section

Health Sciences

License

Copyright (c) 2022 Gisele Gomes de Oliveira; Carolina Hoeveler Costa Dias; Eliane de Carvalho Dourado Aragão; Ana Flávia Bissoto Calvo; Isabela Floriano; Thais Gimenez; Tamara Kerber Tedesco; José Carlos Pettorossi Imparato

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.