What is the importance of finishing and polishing in direct composite resin restorations in anterior teeth?
DOI:
https://doi.org/10.33448/rsd-v11i12.34561Keywords:
Diastema; Dental finishing; Dental polishing; Composite resins.Abstract
The search for aesthetic dental procedures has increased considerably in recent years. With the evolution of resins and direct restorative techniques, diastema closure can be performed, following a clinical protocol conducive to esthetics and restoration composting. This article presents the clinical sequence of diastema closure performed at the Clinic of the Federal University of Maranhão (UFMA). Seeking to emphasize the importance of obeying aesthetic and functional principles of the dental structure and periodontal tissues, emphasizing the importance of finishing and polishing in the success of mimicking the characteristics of natural teeth. It was possible to conclude that with the choice of suitable restorative materials and techniques, combined with a systematic protocol for finishing and polishing the composite resin, it is possible to provide the rehabilitated tooth with characteristics that bring it as close as possible to a natural tooth, favoring a higher quality and treatment longevity.
References
Amaya-Pajares, S. P.; Koi, K.; Watanabe, H.; da Costa, J. B. & Ferracane, J. L. (2022). Development and maintenance of surface gloss of dental composites after polishing and brushing: Review of the literature. Journal of Esthetic and Restorative Dentistry, 34 (1), 15-41. 10.1111/jerd.12875.
Aydin, N.; Topçu, F. T.; Karaoğlanoğlu, S.; Oktay, E. A. & Erdemir, U. (2021). Effect of finishing and polishing systems on the surface roughness and color change of composite resins. Journal of Clinical and Experimental Dentistry, 13 (5), 446-454. 10.4317/jced.58011.
Batihalim, C. N. & Ratnasari, D. (2021). The effect of polishing techniques on color change of nanofill composite resin immersed in green tea (camellia sinensis). Journal of Indonesian Dental Association, 4 (1), 21-27. 10.32793/jida.v4i1.471.
Berwanger, C. et al. (2016). Fechamento de diastema com resina composta direta - relato de caso clínico. Revista da Associacao Paulista de Cirurgioes Dentistas, 70 (3), 317-322. Retrieved from http://revodonto.bvsalud.org/pdf/apcd/v70n3/a16v70n3.pdf.
Dennis, T.; Zoltie, T.; Wood, D. & Altaie, A. (2021). Reduced-step composite polishing systems - a new gold standard? Journal of Dentistry, 112 (2), 67-75. 10.1016/j.jdent.2021.103769.
Dias, J. N.; Veras, I. M. D.; Borges, B. C. D.; de Carvalho, L. K. C. G. & de Assunção, I. V. (2020). Alteração de forma dentária com resina direta: relato de caso. Revista Ciência Plural, 6 (3), 230-238. 10.21680/2446-7286.2020v6n3ID21044.
Freitas, G. R. et al. (2021). Reabilitação estética e funcional das bordas incisais dos dentes anteriores com fechamento de diastemas e reanatomização em resina composta: relato de caso clínico. Revista Odontológica do Brasil Central, 30 (89), 339-356. 10.36065/robrac.v30i89.1537.
Guerra, M. L. R. S.; Venâncio, G. N. & Augusto, C. R. (2017). Fechamento de diastemas anteriores com resina composta direta: Relato de caso. Revista da Faculdade de Odontologia de Lins (UNIMEP), 27 (1), 63-68. 10.15600/2238-1236/fol.v27n1p63-68.
Machado, A. C. et al. (2022). Substituição de restaurações de resina composta em incisivos superiores: relato de caso clínico. Revista Odontológica do Brasil Central, 31 (90), 53-68. 10.36065/robrac.v31i90.1433.
Maenosono, R. M. et al. (2018). Orthodontic treatment finishing with minimally invasive resin composite veneers. Brazilian Dental Science, 18 (4), 127-131. 10.14295/bds.2015.v18i4.1099.
Mangani, F.; Cerutti, A.; Putignano, A.; Bollero, R. & Madini, L. (2017). Clinical approach to anterior adhesive restorations using resin composite veneers. European Journal of Esthetic Dentistry, 2 (2), 188-209. Retrieved from https://pubmed.ncbi.nlm.nih.gov/19655565/.
Marques, M. J. I. F.; Cardoso, M. E. P. & Martins, V. R. G. (2021). Longevidade Das Facetas Diretas Em Resina Composta. Brazilian Journal of Health Review, 4 (6), 28495-28509. 10.34119/bjhrv4n6-395.
Mondelli, J. et al (2018). Fundamentos de dentística operatória. In Guanabara Koogan (Ed.), pp. 234-265, Rio de Janeiro.
Moura, C. A.; Chagas, D. R. S. & Mendonça, I. C. G. Direct and indirect restoration techniques for closing diastemases in early tinds: literature review (2021). Brazilian Journal of Health Review, 4 (6), 29342-29349. 10.34119/bjhrv4n6-461.
Muniz, M. A. B. et al. (2022). Reabilitação oral com facetas de resina composta e influencia na qualidade de vida - relato de caso. Research, society and development, 11 (3), 56-63. 10.33448/rsd-v11i3.26467.
Paolone, G. et al. (2020). Effect of finishing systems on surface roughness and gloss of full-body bulk-fill resin composites. Materials, 13 (24), 1-9. 10.3390/ma13245657.
Pereira, M. R. et al. (2020). Reabilitação estética com resina composta em paciente jovem: relato de caso clínico. Revista Odontológica do Brasil Central, 29 (88), 24-28. 10.36065/robrac.v29i88.1296.
Pereira, A. S., Shitsuka, D. M., Parreira, F. J. & Shitsuka, R. (2018).Metodologia da pesquisa científica. Santa Maria, UFSM.
Pirôpo, L. M. N. et al. (2021). Efeito dos discos de lixa d'água no acabamento e polimento de resina composta. Revista da Faculdade de Odontologia da Universidade Federal da Bahia, 51 (2), 108-115. 10.9771/revfo.v51i2.46652.
Reis, B. O. et al. (2017).Avaliação de diferentes procedimentos de acabamento e polimento sobre a rugosidade de superfície de resina composta submetida à escovação com dentifrício. Archives of Health Investigation, 6 (11), 524-529. 10.21270/archi.v6i11.2263.
Reis, G. R. et al. (2018).Mock-up: predictability and facilitator of restorations aesthetic in composite resin. Revista Odontológica do Brasil Central, 27 (81), 105-111. 10.36065/robrac.v27i81.1131.
Santin, D. C. et al. (2019). Protocolo de acabamento, texturização e polimento para restaurações diretas em resina composta. Clinical and Laboratorial Research in Dentistry, 1-7. 10.11606/issn.2357-8041.clrd.2019.152964.
Sapata, A. & Sato, C (2017). Simple: uma abordagem simples em resinas compostas: anatomia, escultura e protocolos clínicos. In Napoleão (Ed.), pp. 321-347, São Paulo.
Severo, B. G. M. & Reis, T. A. (2022). Classification of composite resins and finishing and polishing methods. Research, society and development, 11 (7), 57-69. 10.33448/rsd-v11i7.30257.
Tosco, V. et al. (2020). Effect of four different nishing and polishing systems on resin composites: roughness surface and gloss retention evaluations. Minerva Stomatologica, 69 (4), 207-214. 10.23736/S0026-4970.19.04310-3.
Tessarin, F. B. P. et al. (2018). Influence of illuminants and different observers on the perception of surface gloss of resin composite. Brazilian Dental Science, 21 (4), 451-460. 10.14295/bds.2018.v21i4.1648.
Vishwanath, S. et al (2022). Finishing and polishing of composite restoration: assessment of knowledge, attitude and practice among various dental professionals in india. Cureus, 14 (1), 163-171. 10.7759/cureus.20887.
Zhang, L.; Yu, P. & Wang, X. Y. (2021). Surface roughness and gloss of polished nanofilled and nanohybrid resin composites. Journal of Dental Sciences, 16 (4), 1198-1203. 10.1016/j.jds.2021.03.003.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Djalma Antonio de Lima Júnior; Ronaldo Nogueira Filho; Marcela Regina Araujo de Jesus Batista; Geyna Aguiar Soares do Couto; Darlon Martins Lima; Leily Macedo Firoozmand
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
