The influence of ceramic thickness on the mechanical properties of dual resin cements: literature review

Authors

DOI:

https://doi.org/10.33448/rsd-v11i14.36519

Keywords:

Surface properties; Resin cements; Ceramics.

Abstract

The objective of this study is to clarify the extent to which the thickness of the ceramics influences the light curing and thus affects the mechanical properties of dual cure resin cements, through a literature review. Articles published in online databases were searched in which they evaluated whether there is an influence of ceramic thickness on the mechanical properties of dual cure resin cements. The databases used were PubMed, LILACS and SCOPUS. The research conducted by two authors was carried out in June 2022 and obtained the final result of 6 articles selected for the review. In this research, the authors report that dual cure resin cements can be used in zirconia crowns up to 2 mm, while for monolithic lithium disilicate crowns they can be used in pieces up to 2.5 mm. After reviewing the literature on the influence of ceramic thickness on the mechanical properties of dual cure resin cements, we can consider that in pieces from 2 mm there is a decrease in mechanical properties, including microhardness and degree of conversion.

References

Ayres, A. P. A., Andre, C. B., Pacheco, R. R., Carvalho, A. O., Bacelar-Sá, R. C., Rueggeberg, F. A., & Giannini, M. (2015). Indirect restoration thickness and time after light-activation effects on degree of conversion of resin cement. Brazilian dental journal, 26, 363-367.

Bansal, R., Taneja, S., & Kumari, M. (2016). Effect of ceramic type, thickness, and time of irradiation on degree of polymerization of dual–cure resin cement. Journal of Conservative Dentistry: JCD, 19(5), 414.

Bastiani, F. G., Loatt, A. H. M., Busato, M. C. A., Bernardon, P., & Lagustera, C. E. (2022). Avaliação da alteração de cor, inicial e tardia, de cimento resinoso fotopolimerizável. Revista Cereus, 14(2), 167-181.

Campos, V. S. (2020). Influência de diferentes espessuras cerâmicas na atenuação da luz, nas propriedades mecânicas e de nanoinfiltração de cimentos resinosos autoadesivos. [Tese- Doutorado em Odontologia]. Ponta Grossa: Universidade Estadual de Ponta Grossa.

Ganjkar, M. H., Heshmat, H., & Ahangari, R. H. (2017). Evaluation of the effect of porcelain laminate thickness on degree of conversion of light cure and dual cure resin cements using FTIR. Journal of Dentistry, 18(1), 30.

Kilinc, E., Antonson, S. A., Hardigan, P. C., & Kesercioglu, A. (2011). The effect of ceramic restoration shade and thickness on the polymerization of light-and dual-cure resin cements. Operative Dentistry, 36(6), 661-669.

Lee, I. B., An, W., Chang, J., & Um, C. M. (2008). Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements. Dental Materials, 24(8), 1141-1147.

Longhini, D., Rocha, C. O. M., De Oliveira, L. T., Olenscki, N. G., Bonfante, E. A., & Adabo, G. L. (2019). Mechanical behavior of ceramic monolithic systems with different thicknesses. Operative Dentistry, 44(5), E244-E253.

Martins, F. V., Vasques, W. F., & Fonseca, E. M. (2019). How the variations of the thickness in ceramic restorations of lithium disilicate and the use of different photopolymerizers influence the degree of conversion of the resin cements: a systematic review and meta‐analysis. Journal of Prosthodontics, 28(1), e395-e403.

Meng, X., Yoshida, K., & Atsuta, M. (2008). Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agents. Dental Materials, 24(5), 594-599.

Monteiro, J. B., Riquieri, H., Prochnow, C., Guilardi, L. F., Pereira, G. K. R., Borges, A. L. S., & Valandro, L. F. (2018). Fatigue failure load of two resin-bonded zirconia-reinforced lithium silicate glass-ceramics: Effect of ceramic thickness. Dental Materials, 34(6), 891-900.

Nocca, G., Iori, A., Rossini, C., Martorana, G. E., Ciasca, G., Arcovito, A., & Marigo, L. (2015). Effects of barriers on chemical and biological properties of two dual resin cements. European Journal of Oral Sciences, 123(3), 208-214.

Passos, S. P., Kimpara, E. T., Bottino, M. A., Santos-Jr, G. C., & Rizkalla, A. S. (2013). Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR. Dental Materials, 29(3), 317-323.

Pishevar, L., Ashtijoo, Z., & Khavvaji, M. (2019). The effect of ceramic thickness on the surface microhardness of dual-cured and light-cured resin cements. The Journal of Contemporary Dental Practice, 20(4), 466-470.

Queiroz, M. E. (2022). Influência da espessura e diferentes graus de opacidade do dissilicato de lítio no grau de conversão e resistência de união de cimentos resinosos. [Dissertação- Mestrado em Odontologia]. São Paulo: Universidade Estadual Paulista

Scotti, N., Comba, A., Cadenaro, M., Fontanive, L., Breschi, L., Monaco, C., & Scotti, R. (2016). Effect of lithium disilicate veneers of different thickness on the degree of conversion and microhardness of a light-curing and a dual-curing cement. The International journal of prosthodontics, 29(4), 384-388.

Soares, C. J., Silva, N. R., & Fonseca, R. B. (2006). Influence of the feldspathic ceramic thickness and shade on the microhardness of dual resin cement. Operative dentistry, 31(3), 384-389.

Sulaiman, T. A., Abdulmajeed, A. A., Donovan, T. E., Ritter, A. V., Lassila, L. V., Vallittu, P. K., & Närhi, T. O. (2015). Degree of conversion of dual-polymerizing cements light polymerized through monolithic zirconia of different thicknesses and types. The Journal of Prosthetic Dentistry, 114(1), 103-108.

Turp, V., Ongul, D., Gultekin, P., Bultan, O., Karataslı, B., & Tunc, E. P. (2015). Polymerization efficiency of two dual-cure cements through dental ceramics. Journal of Istanbul University Faculty of Dentistry, 49(1), 10.

Turp, V., Turkoglu, P., & Sen, D. (2018). Influence of monolithic lithium disilicate and zirconia thickness on polymerization efficiency of dual‐cure resin cements. Journal of Esthetic and Restorative Dentistry, 30(4), 360-368.

Yoshida, K., Tsuo, Y., Meng, X., & Atsuta, M. (2007). Mechanical Properties of Dual‐Cured Resin Luting Agents for Ceramic Restoration. Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry, 16(5), 370-376.

Downloads

Published

03/11/2022

How to Cite

LIMA, C. E. de M. C. .; MOREIRA , P. H. de A. .; BESERRA, Y. P. .; SANTOS , G. S. B. dos .; BAZÁN, J. M. N. . The influence of ceramic thickness on the mechanical properties of dual resin cements: literature review. Research, Society and Development, [S. l.], v. 11, n. 14, p. e495111436519, 2022. DOI: 10.33448/rsd-v11i14.36519. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/36519. Acesso em: 27 dec. 2024.

Issue

Vol. 11 No. 14

Section

Health Sciences

License

Copyright (c) 2022 Carlos Emanuel de Matos Chaves Lima; Pedro Henrique de Aguiar Moreira ; Yuri Pereira Beserra; George Sampaio Bonates dos Santos ; José Manuel Noguera Bazán

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.