Applicability of calcined sewage sludge instead of Portland cement for coating mortars
DOI:
https://doi.org/10.33448/rsd-v11i15.37057Keywords:
Calcined Sewage Sludge; Coating Mortars; Feasibility of use.Abstract
Based on the environmental assumptions that permeate the role of researchers in enabling the use of waste in consumer goods, using sewage sludge in human consumption material has become the object of worldwide study because of the potential that it carries. Aiming to fulfill the sustainable role through the creation of mechanisms that favor the ecological coexistence between environment and human beings, the use of the calcined sewage sludge as a potentiator in the properties of the material is made possible through the construction materials, behavior. Coating mortars are currently evaluated by exposing, from the replacement of the cement by the calcined material, an effective applicability with respect to its resistance to deleterious agents. It is understood that to idealize unconventional materials with the use of residues that have high degradation power to the environment, ratifies the attempt to mitigate large and irreversible environmental impacts arising from improper and poorly planned disposal.
References
Andreoli, C. V., Ferreira, A, C., Bonnet, B. R. P., Lara, A. I., & Pegorini, E. S. (1998). Produção real e estimativas teóricas de lodo de esgoto no Estado do Paraná. In: I Seminário sobre Gerenciamento de Biossólidos do Mercosul, Curitiba, PR, Brasil, 1998. <https://bit.ly/3h6iuOm>.
Banfill, P., & Frias, M. (2007). Rheology and conduction calorimetry of cement modified with calcined paper sludge. Cement and Concrete Research, 37 (2), 184-190. https://doi.org/10.1016/j.cemconres.2006.11.013
Castro, A. L. F. G., Rodrigues, O., & Escala, P. S. (2015). Cenário da disposição do lodo de esgoto: uma revisão das publicações ocorridas no Brasil de 2004 a 2014. Multi-Science Journal, 1 (2), 66-73. https://doi.org/10.33837/msj.v1i2.84
Chen, H., Ma, X., & Dai, H. (2010). Reuse of water purification sludge as raw material in cement production. Cement and Concrete Composites, 32 (6), 436-439. https://doi.org/10.1016/j.cemconcomp.2010.02.009
Couto, T. A. (2008). Reação álcali-agregado: estudo do fenômeno em rochas silicosas. Dissertação de mestrado, Universidade Federal de Goiás, Goiânia, GO, Brasil.
Cunha Oliveira, J. V. (2020). State of the art of the development of sustainable concrete for applications in conventional structures. Research, Society and Development, 9 (11), 1-19. http://dx.doi.org/10.33448/rsd-v9i11.10272
Cunha Oliveira, J. V., Chagas, L. S. V. B., Meira, F. F. D. A., & Carneiro, A. M. P. (2021). Potentialities in the performance of coating mortars through the addition of sewage sludge ash. Research, Society and Development, 10 (6), 1-13. http://dx.doi.org/10.33448/rsd-v10i6.15736
Cunha Oliveira, J. V., Chagas, L. S. V. B., Meira, F. F. D. A., Carneiro, A. M. P., & Melo Neto, A. A. (2020). Study of the potential of adhesion to the substrate of masonry and tensile in the flexion in mortars of coating with gray of the sewage sludge. Materials Science Forum, 1012, 256-261. https://doi.org/10.4028/www.scientific.net/MSF.1012.256
Cunha Oliveira, J. V., Meira, F. F. D. A., & Chagas, L. S. V. B. (2021). Soil-cement bricks with insertion of scheelite-tailings: Mechanical behavior and physico-chemical evaluation of kneading water. Research, Society and Development, 10 (6), 1-13. http://dx.doi.org/10.33448/rsd-v10i6.15412
Cunha Oliveira, J. V., Meira, F. F. D. A., & Lucena, K. F. M. (2021a). Highlights on the properties of the soda-lime-silicate glass residue that enable its use as filler in ultra-high performance concrete. Research, Society and Development, 10 (3), 1-11. http://dx.doi.org/10.33448/rsd-v10i3.13801
Cunha Oliveira, J. V., Meira, F. F. D. A., & Lucena, K. F. M. (2021b). Application of mineral admixtures and steel fibers in experimental compositions for reactive powders concrete. Research, Society and Development, 10 (1), 1-18. http://dx.doi.org/10.33448/rsd-v10i1.11910
Cunha Oliveira, J. V., Morais, C. R. S., & Meira, F. F. D. A. (2021). Ultra-high performance concrete made from the insertion of glass residues as supplementary cement material. Research, Society and Development, 10 (7), 1-13. https://doi.org/10.33448/rsd-v10i7.16988
Geraldo, R. H. (2016). Aglomerante álcali-ativado contendo lodo de ETA e cinza de casca de arroz. Dissertação de mestrado, Universidade Estadual de Campinas, Campinas, SP, Brasil.
Geyer, A. L. B. (2001). Contribuição ao estudo da disposição final e aproveitamento da cinza de lodo de estações de tratamento de esgotos sanitários como adição ao concreto. Tese de doutorado, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Brasil.
John, V. M. (2017). Materiais de Construção e o Meio Ambiente. In: Materiais de Construção Civil e Princípios de Ciência e Engenharia de Materiais (3. ed.), São Paulo, SP, Brasil. ISBN 978-85-98576-27-5. Available in <https://bit.ly/2NS9xWS>.
Lerepio, A. A. (2004). Gaia: um método de gerenciamento de aspectos e impactos ambientais. Tese de doutorado, Universidade Federal de Santa Catarina, Florianópolis, SC, Brasil.
Lessa, G. T. (2005). Contribuição ao estudo da viabilidade da utilização do lodo de estação de tratamento biológico de esgoto misto na construção civil. Dissertação de mestrado, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Brasil.
Lin, Y., Zhou, S., Li, F., & Lin, Y. (2012). Utilization of municipal sewage sludge as additives for the production of eco-cement. Journal of Hazardous Materials, 213-214, 457-465. https://doi.org/10.1016/j.jhazmat.2012.02.020
Mehta, P. K., & Monteiro, P. J. (2008). Concreto: Microestrutura, Propriedades e Materiais (2. ed.). New York: McGraw-Hill.
Menezes, R. R., Neves, G. A., & Ferreira, H. C. (2002). O estado da arte sobre o uso de resíduos como matérias-primas cerâmicas alternativas. Revista Brasileira de Engenharia Agrícola e Ambiental, 6 (2), 303-313. http://dx.doi.org/10.1590/S1415-43662002000200020
Oliveira, M. A. (2017). Finos de agregados reativos na minimização da reação álcali-agregado. Dissertação de mestrado, Universidade Federal de Ouro Preto, Ouro Preto, MG, Brasil.
Passeto, W. (2006). Dossiê do Saneamento – Esgoto é vida (4. ed.). Curitiba: cediplac.
Pedroza, M. M., Vieira, G. E. G., Sousa, J. F., Pickler, A. C., Leal, E. R. M., & Milhomen, C. C. (2010). Produção e tratamento de lodo de esgoto – uma revisão. Revista Liberato, 11 (16), 147-157. https://bit.ly/3efkjXJ
Recena, F. A. P. (2012). Conhecendo argamassa (2. ed.). Porto Alegre: EDIPUCRS.
Tay, J. H. (1987). Bricks Manufactured from Sludge. Journal of Environmental Engineering, 113 (2), 278-284. https://doi.org/10.1061/(ASCE)0733-9372(1987)113:2(278)
Viana, M. M. (2013). Obtenção e utilização de produtos de pirólise do lodo de esgoto para adsorção de poluentes em meio aquoso. Tese de doutorado, Universidade de São Paulo, São Paulo, SP, Brasil.
Waldemar, C. C. (1992). Avaliação do potencial de utilização do lodo nas estações de tratamento de esgotos. Relatório 1. Belém, PA, Brasil.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Humberto Alencar de Sá; João Victor da Cunha Oliveira; Leila Soares Viegas Barreto Chagas; Frankslale Fabian Diniz de Andrade Meira
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
