Use of the Computer Aided Design-Computer Aided Manufacturing (CAD-CAM) system with its indications, advantages and disadvantages: An integrative review
DOI:
https://doi.org/10.33448/rsd-v13i9.46833Keywords:
Printing three-dimensional; Technology dental; CAD-CAM.Abstract
The introduction of CAD-CAM in dentistry has revolutionized the way dental treatments are planned, designed, and manufactured. The CAD/CAM system refers to a set of technologies used for designing and manufacturing dental prostheses, such as crowns, veneers, dentures, among other devices. CAD/CAM systems can be a useful tool in diagnosis, planning, and rehabilitative treatments. In order to present the indications, advantages, and disadvantages of CAD/CAM technology, research was conducted in the academic databases Google Scholar, Pubmed, Lilacs, and Scielo on the subject. As a conclusion, we found that this technology offers significant benefits, including greater precision, reduced treatment time for patients, and a decrease in the need for uncomfortable traditional impressions. However, the initial cost of equipment and materials may be a challenge for some dental clinics or offices.
References
Al-Aali, K. A., Bin-Shuwaish, M. S., Alhenaki, A. M., Al Ahdal, K., Al Deeb, L., Maawadh, A. M., AlHelal, A., Alshehri, H., Vohra, F., & Abduljabbar, T. (2020). Influence of milling systems and marginal configurations on the fit of yttrium stabilized tetragonal zirconia polycrystals (Y-TZP) copings. Journal of Applied Biomaterials & Functional Materials, 18, 2280800020924514. https://doi.org/10.1177/2280800020924514
Al-Meraikhi, H., Yilmaz, B., McGlumphy, E., Brantley, W., & Johnston, W. M. (2018). In vitro fit of CAD-CAM complete arch screw-retained titanium and zirconia implant prostheses fabricated on 4 implants. Journal of Prosthetic Dentistry, 119(3), 409-416. https://doi.org/10.1016/j.prosdent.2017.04.023
Alves, H. F. T. (2022, October 5). Restaurações unitárias indiretas CAD/CAM: Uma revisão de literatura [Trabalho de conclusão de curso]. Repositório de Trabalhos de Conclusão de Curso.
Alves, C. L. de O., Maia, C. F. L., Moura, J. B. de, Andrade, K. L. C., & Rodrigues, R. A. A. (2022). Sistema CAD/CAM: Uma ferramenta digital na odontologia atual / CAD/CAM system: Digital tool in current dentistry. Saúde em Foco, 9(2), 40-57.
Batista, M. S. (2021, December 3). Fluxo digital na odontologia moderna: Revisão de literatura [Trabalho de conclusão de curso]. Centro Universitário UNDB.
Blackwell, E., Nesbit, M., & Petridis, H. (2017). Survey on the use of CAD-CAM technology by UK and Irish dental technicians. British Dental Journal, 222(9), 689-693. https://doi.org/10.1038/sj.bdj.2017.407.
Cao, J., Chang-Kit, B., Katsnelson, G., Far, P. M., Uleryk, E., Ogunbameru, A., Miranda, R. N., & Felfeli, T. (2022). Protocol for a systematic review and meta-analysis of the diagnostic accuracy of artificial intelligence for grading of ophthalmology imaging modalities. Diagnostic and Prognostic Research, 6(1), 15. https://doi.org/10.1186/s41512-022-00127-9
Camargo, I. F., Manetti, L. P., Zeczkowski, M., Neto, D. S., Pini, N. I. P., Mori, A. A., et al. (2018). Sistemas CAD/CAM e suas aplicações na odontologia: Revisão da literatura. Revista Uningá, 55(S3), 221-228.
Choukse, V., Kunturkar, A., Nirmal Aidasani, A., Masih Gottlieb, A., Agrawal, R., & Bumb, P. P. (2023). Survey of Indian dental professionals regarding the use of computer-aided design/computer-aided manufacture (CAD/CAM) technology. Cureus, 15(6), e40392. https://doi.org/10.7759/cureus.40392
Cruz, E. M. (2018, July 10). Sistemas CAD/CAM na odontologia [Trabalho de conclusão de curso]. Universidade Federal de Minas Gerais.
Dickens, N., Haider, H., Lien, W., Simecek, J., & Stahl, J. (2019). Longitudinal analysis of CAD/CAM restoration incorporation rates into Navy dentistry. Military Medicine, 184(5-6), e365-e372. https://doi.org/10.1093/milmed/usy260
Datta, A., & Sandhu, H. S. (2022). Success of fixed partial denture prostheses observed in a military dental centre: A cross-sectional study. Medical Journal of the Armed Forces India, 78(Suppl 1), S206-S212. https://doi.org/10.1016/j.mjafi.2020.08.009
Gorripati, J. P., & Godbole Dubey, S. A. (2024). Designing a single lithium disilicate crown: A computer-aided design and computer-aided manufacturing approach with Exocad software. Cureus, 16(4), e57384. https://doi.org/10.7759/cureus.57384
Junior, M., & Lima, H. (2020). Fotografias, imagens digitais, CAD-CAM e prototipagem: A evolução do atendimento em odontologia (Artigo de graduação). Centro Universitário Fametro, Fortaleza.
Jurado, C. A., Lee, D., Ramirez, P., Cortes-Treviño, D. A., & Tsujimoto, A. (2024). Fracture resistance of chairside CAD/CAM lithium disilicate-reinforced ceramic occlusal veneers with and without margin and full coverage crowns. Operative Dentistry, 49(1), 84-90. https://doi.org/10.2341/23-043-L
Kunkel, T. C., & Engelmeier, R. L. (2016). Canine guidance via Biogeneric Copy: A clinical report. International Journal of Computerized Dentistry, 19(1), 77-81. https://doi.org/10.1234/abcd.2016.01901
Lima, V. A., & Pinho, L. C. F. de. (2023, September 10). Odontologia digital. Revista Cathedral, 5(3), 47-57.
Mendes, I. E., Ribeiro Filho, J. C., Lourini, L. C., Salvador, M. D., de Carvalho, A. R., Buzanello, M. R., & Bertolini, G. R. F. (2022). Cryotherapy in anterior cruciate ligamentoplasty pain: A scoping review. Therapeutic Hypothermia and Temperature Management, 12(4), 183-190. https://doi.org/10.1089/ther.2021.0032
Mendes KDS, Silveira RCCP, Galvão CM. (2008). Revisão integrativa: Método de pesquisa para a Incorporação de evidências na saúde e na enfermagem. Texto Contexto Enferm, Florianópolis, Out-Dez; 17(4): 758-64. https://doi.org/10.1590/S0104-07072008000400018
Mangano, F., Gandolfi, A., Luongo, G., & Logozzo, S. (2017). Intraoral scanners in dentistry: A review of the current literature. BMC Oral Health, 17(1), 149. https://doi.org/10.1186/s12903-017-0442-x
Medeiros Alves, V., Simões de Oliveira, R., Luiz, O., Barbosa, C., Neto, O., Dias, S., et al. (2017). Vantagens X desvantagens do sistema CAD/CAM / Advantages X disadvantages of the CAD/CAM system. Brazilian Journal of Surgery and Clinical Research - BJSCR, 18(1), 2317-4404.
Meirowitz, A., Bitterman, Y., Levy, S., Mijiritsky, E., & Dolev, E. (2019). An in vitro evaluation of marginal fit zirconia crowns fabricated by a CAD-CAM dental laboratory and a milling center. BMC Oral Health, 19(1), 103. https://doi.org/10.1186/s12903-019-0810-9 .
Malpartida-Carrillo, V., Tinedo-Lopez, P. L., Ortiz-Culca, F., Guerrero, M. E., & Amaya-Pajares, S. P. (2020). Techniques for retrievability and for registering screw access holes in cement-retained implant-supported prostheses: A scoping review of the literature. Journal of Prosthetic Dentistry, 123(3), 427-433. https://doi.org/10.1016/j.prosdent.2019.03.011 .
Nihei, T., Ohkubo, C., Nishiyama, Y., Tsubota, Y., Koizumi, H., Maseki, T., & Miyazaki, M. (2020). A report on the clinical use of bonding systems for coronal restorations produced from CAD/CAM resin blocks. Dental Materials Journal, 39(4), 531-533. https://doi.org/10.4012/dmj.2019-277
Numajiri, T., Morita, D., Yamochi, R., Nakamura, H., Tsujiko, S., Sowa, Y., Toyoda, K., Tsujikawa, T., Arai, A., & Hirano, S. (2020). Does an in-house computer-aided design/computer-aided manufacturing approach contribute to accuracy and time shortening in mandibular reconstruction? Journal of Craniofacial Surgery, 31(7), 1928-1932. https://doi.org/10.1097/SCS.0000000000006699
Nobre, T. C. N., Rosa, D. O. S., & Heliodoro, E. A. (2020). Integrative reviews in Brazilian nursing postgraduation programs: A bibliometric study. Revista Brasileira de Enfermagem, 73(suppl 6), e20190441. https://doi.org/10.1590/0034-7167-2019-0441
Ouzer, A. (2015). The evolution and fabrication of implant-supported full-arch hybrid prostheses: From conventional casted metal to an all-ceramic zirconia. New York State Dental Journal, 81(6), 44-49.
Papadiochou, S., & Pissiotis, A. L. (2018). Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques. Journal of Prosthetic Dentistry, 119(4), 545-551. https://doi.org/10.1016/j.prosdent.2017.07.001
Peng, M., Li, C., Huang, C., & Liang, S. (2021). Digital technologies to facilitate minimally invasive rehabilitation of a severely worn dentition: A dental technique. Journal of Prosthetic Dentistry, 126(2), 167-172. https://doi.org/10.1016/j.prosdent.2020.05.012
Roh, Y. H., Kang, T., Lim, C., & Nam, K. W. (2023). Metal ion release according to leg length discrepancy in ceramic-on-metal hip arthroplasty. Acta Ortopédica Brasileira, 31(spe2), e265272. https://doi.org/10.1590/1413-785220233102e265272
Ruf, P., Orassi, V., Fischer, H., Steffen, C., Duda, G. N., Heiland, M., Kreutzer, K., Checa, S., & Rendenbach, C. (2022). Towards mechanobiologically optimized mandible reconstruction: CAD/CAM miniplates vs. reconstruction plates for fibula free flap fixation: A finite element study. Frontiers in Bioengineering and Biotechnology, 10, 1005022. https://doi.org/10.3389/fbioe.2022.1005022
Santos, P. V. B. dos. (2022). O uso da tomografia computadorizada de feixe cônico e sistema CAD/CAM no planejamento de implantes: Revisão de literatura [Trabalho de conclusão de curso]. Escola Bahiana de Medicina e Saúde Pública.
Suhonen, R., Stolt, M., Katajisto, J., & Leino-Kilpi, H. (2015). Review of sampling, sample and data collection procedures in nursing research—An example of research on ethical climate as perceived by nurses. Scandinavian Journal of Caring Sciences, 29(4), 843-858. https://doi.org/10.1111/scs.12194
Stona, D., Burnett, L. H. Jr., Mota, E. G., & Spohr, A. M. (2015). Fracture resistance of computer-aided design and computer-aided manufacturing ceramic crowns cemented on solid abutments. Journal of the American Dental Association, 146(7), 501-507. https://doi.org/10.1016/j.adaj.2015.02.012
Tapie, L., Lebon, N., Mawussi, B., Fron-Chabouis, H., Duret, F., & Attal, J. P. (2015). Understanding dental CAD/CAM for restorations—accuracy from a mechanical engineering viewpoint. International Journal of Computerized Dentistry, 18(4), 343-367. https://doi.org/10.1111/ijcd.2015.18.issue-4
Wanderley, A. E. C., & Souto, R. R. F. A. (2018). Uso de sistema CAD/CAM na odontologia estética: Relato de caso. Archives of Health Investigation, 7(2317-3009). https://doi.org/10.5935/2317-3009.20180045
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Elizangela Andrade de Abreu; Jade Galdino; Fernando Martins Baeder; Gabriela Traldi Zaffalon ; Ricardo dos Santos Baptista; Paola Fernanda Leal Corazza
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
