Implementation of the SMED tool for continuous improvement in a process of format exchange in the tissue paper industrial plant: A Bibliometric analysis

Authors

DOI:

https://doi.org/10.33448/rsd-v8i2.705

Keywords:

Format exchange; SMED; tissue industry.

Abstract

The tissue industry, over the decades, has shown remarkable growth, which can be explained, for the most part, by the increase of consumer goods for hygiene in developing countries, such as Brazil. The evolution of the market has made it even more competitive and, for companies, it is necessary to assume bold models of management capable of promoting productivity increase with cost reduction, for example with the adoption of SMED (Single Minute Exchange of Die) in one step of production: programmed format change in tissue conversion unit. Thus, this study had as main objective to carry out a bibliometric revision on the subject, in order to map pertinent literature and to ascertain the studies, countries and authors with greater scientific relevance. The database used for bibliometric review was the Web of Science® (WoS). From the results of the research carried out in September 2018, a bank of 10 articles was constructed, observing a large number of publications, 171 in all, on the SMED tool applied in continuous improvement in processes of format change in industrial plants. The countries with the largest number of publications on the subject are Italy, Poland and Turkey and the year the most published on the application of SMED in industries was 2016 and 2017. This highlights the relevance of research on SMED implementation, in addition to In addition, the frequent attempt to propose new methods for reducing the times of format change in industries indicates that there is still a field of research to be explored.

References

BRAGLIA, M.; et al. Enhancing SMED: Changeover Out of Machine Evaluation Technique to implement the duplication strategy. Production Planning & Control, Inglaterra, Vol. 27, ed. 4, p. 328-342, 2016.

BRAGLIA, M.; et al. SMED enhanced with 5-Whys Analysis to improve set-upreduction programs: the SWAN approach. International Journal of Advanced Manufacturing Technology, Itália, Vol. 90, ed. 5-8, p. 1845-1855, 2017.

CHIAVANETO, I. Introdução à Teoria Geral da Administração. Rio de Janeiro: Elsevier, 2003.

CORREA, D. V. G. Celulose: logística e distribuição internacional. SENAI SP. São Paulo. 2014.

FALAGAS, M. E. et al. Comparison of PubMed, Scopus, web of science, and Google scholar: strengths and weaknesses. The FASEB journal, v. 22, n. 2, p. 338-342, 2008.

FILLA, J. The Single Minute Exchange of Die Methodology in a High-Mix Processing Line. Journal of Competitiveness, República Tcheca, Vol. 8, ed. 2, p. 59-69, 2016.

FMI. Perspectiva Econômica Mundial. Relatório do Fundo Monetário Internacional, 2018. Disponível em: <https://www.imf.org/en/publications/weo>.

Acesso em: 25 de Setembro de 2018.

FU, H. Z.; WANG, M. H.; HO, Y. S. Mapping of drinking water research: A bibliometric analysis of research output during 1992–2011. Science of the Total Environment, v. 443, p. 757-765, 2013.

GODINHO, M. F.; FERNANDES, F. C. F. Manufatura enxuta: uma revisão que classifica e analisa os trabalhos apontando perspectivas de pesquisa futuras. Gestão & Produção. Brasil. Vol. 11, n. 1 (jan./abr. 2004), p. 1-19, 2004.

GRZYBOWSKA, K.; et al. Optymisation of equipment setup processes in enterprises. Metalurgija, Polônia, Vol. 51, ed. 4, p. 555-558, 2012.

JCR, JOURNAL CITATION REPORT. 2017 Journal Citation Reports, 2017. Disponível em:<https://admin.umt.edu.pk/Media/Site/lrc/FileManager/hecrecjournals/JCR_2017.pdf>. Acesso em: 20 de Junho de 2018.

JULIEN, P. A. Empreendedorismo regional e economia do conhecimento. Trad. Márcia Freire Ferreira Salvador. Editora Saraiva. São Paulo. 2017.

KARASU, M.; et al. FIS-SMED: a fuzzy inference system application for plastic injection mold changeover. International Journal of Advanced Manufacturing Technology, Londres, Vol. 94, p. 545-559, 2018.

KARASU, M.; et al. Improvement of changeover times via Taguchi empowered SMED/case study on injection molding production. Measurement, Oxford, Vol. 47, p. 741-748, 2014.

LEME, R. D. J.; et al. Creating value with less impact: Lean, green and eco-efficiency in a metalworking industry towards a cleaner production. Journal of Cleaner Production, Inglaterra, Vol. 196, p. 517-534, 2018.

LEVINSON, W.A. Henry Ford's lean vision: Enduring principles from the first Ford motor plant. Productivity Press. 2002.

MANKTELOW, J.; CARLSON, M. SWOT Analysis Discover new Opportunities Manage and Eliminate Threats. Mindtools. 2010. Disponível em: <http://www.mindtools.com/pages/article/newTMC_05.htm>.

Acesso em 20 de Jun de 2015.

MATTOS, R. L. G.; VALENÇA, A. C. V. A reestruturação do setor de papel e celulose. BNDES Setorial, Rio de Janeiro, n. 10, p. 263-267, 1999.

MIGUEZ, P. Economia criativa: uma discussão preliminar. EDUFBA, Salvador, p. 95-115, 2007.

PINTO, J. P. Pensamento Lean - A filosofia das organizações vencedoras. Lidel Edições. Técnicas, Ltda. 2009.

RODRIGUES, J. N.; et al. 50 Gurus Para o Século XXI. 1. ed. Lisboa: Centro Atlântico. Portugal, 2005.

SHINGO, S. A Revolution in Manufacturing: The SMED System. Translated by Andrew P. Dillon. Productivity Press. Portland, Oregon. 1985.

SHINGO, S. O Sistema Toyota de Produção do ponto de vista da Engenharia de Produção. Trad. Eduardo Schaan. 1ª Ed. – Artes Médicas. Editora Bookman. Porto Alegre. 1996.

STADNICKA, D. Setup analysis: combining SMED with other tools. Management and Production Engineering Review, Polônia, Vol. 6, ed. 1, p. 36-50, 2015.

STREHL, L. O fator de impacto do ISI e a avaliação da produção científica: aspectos conceituais e metodológicos. Ciência da informação. Brasília. Vol. 34, n. 1 (jan./abr. 2005), p. 19-27, 2005.

VAN LEEUWEN, J. P.; et al. Distributed object models for collaboration in the construction industry. Automation in Construction, Holanda, Vol.14, ed. 4, p. 491-499, 2005.

WOMACK, J. P.; JONES, D. T. Lean Thinking. Banish Waste and Create Wealth in you Corporation. 2nd edition. – Free Press. New York. 2002.

WOMACK, J. P.; JONES, D. T. A Mentalidade Enxuta nas Empresas: elimine o desperdício e crie riqueza. 6ª ed – Campus. Rio de Janeiro. 2004.

YANG, J. S. A procedural approach of inspecting CAD model errors. Engineering Computations, Inglaterra, Vol. 21, ed. 7-8, p. 736-747, 2004.

Published

01/01/2019

How to Cite

RODRIGUES, R. M.; FREITAS, R. R. de. Implementation of the SMED tool for continuous improvement in a process of format exchange in the tissue paper industrial plant: A Bibliometric analysis. Research, Society and Development, [S. l.], v. 8, n. 2, p. e4582705, 2019. DOI: 10.33448/rsd-v8i2.705. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/705. Acesso em: 25 sep. 2021.

Issue

Section

Review Article