Production and characterization of laminated metal composite produced by cold roll bonding
DOI:
https://doi.org/10.33448/rsd-v8i2.749Keywords:
Revetment by rolling; Intermetallic; Adhesion.Abstract
The growing interest in the industries for laminated metal composite results in the needed to develop manufacturing technologies each time more efficiently. Ever since is a topic of a few discussion in Brazil and it results on the delay in scientific knowledge about the subject, the present work goals to produce a laminated metal composite by the cold roll bonding process in order to improve the national material competitiveness in the external marketplace. The first composite proposed was constitute by aluminium AA1050 and duplex stainless steel UNS S32304. Once the production attempts were ineffective, the second material replaced by a ferritic stainless steel AISI 430 in order to understand the bonding mechanism. The use of this metal allowed the laminated metal composite production and posterior study with peeling test, microestrutural analysis of the materials bonding mechanism.
References
AKRAMIFARD, H. R.; MIRZADEH, H.; PARSA, M. H. Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties. Materials Science and Engineering: A, v. 613, p. 232-239, 2014.
BAY, N. Mechanisms producing metallic bonds in cold welding. Welding Journal, v. 62, n. 5, p. 137, 1983.
CHIAVERINI, V. Tecnologia Mecânica – Processos de Fabricação e Tratamento. Volume II, 2ª Edição, São Paulo, Editora McGraw-Hill, 1986.
HELMAN, H.; CETLIN, P. R. Fundamentos Da Conformação Mecânica Dos Metais. Ed. Rio de Janeiro: Editora Guanabara Dois, 2010.
LI, L.; NAGAI, K.; YIN, F. Progress in cold roll bonding of metals. Science and Technology of Advanced Materials, v. 9, n. 2, p. 1-11, 2008.
MOHAMED, H. A.; WASHBURN, J. Mechanism of solid state pressure welding. Welding Journal. vol. 54, p. 302-310. 1975.
NASERI, M.; REIHANIAN, M.; BORHANI, E. Bonding behavior during cold roll-cladding of tri-layered Al/brass/Al composite. Journal of Manufacturing Processes, v. 24, p. 125-137, 2016.
PAN, D.; GAO, K.; YU, J. Cold roll bonding of bimetallic sheets and strips. Materials Science and Technology, v. 5, n. 9, p. 934-939, 1989.
WU, B.; LI, L.; GAO, C.; YANG, Z.; ZHOU, D. Study of Deformation Behavior of 4A60 Aluminum Alloy/08Al Steel Clad Material During Cold Roll Bonding. DEStech Transactions on Engineering and Technology Research, n. apetc, 2017.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
