Competitive performance of Brazil and the major world exports in the MDF market
DOI:
https://doi.org/10.33448/rsd-v11i5.28681Keywords:
Comparative advantage revealed; Coverage rate; Relative market position; International trade.Abstract
MDF began to be produced in Brazil at the end of the 90's and since then the market for this product has been expanding in the country, due to the creation of new production units, as well as the search for new sources of technology and modernization of the Brazilian industry, contributing to socioeconomic development. The present research analyzed the competitive performance of the Brazilian MDF industry and of the four largest exporters of the product in the world (Germany, Belgium, Thailand and China), between the period of 1995 and 2020, using the indices of Revealed Comparative Advantage, Coverage Rate, Strengths, Neutrals and Weaknesses and Relative Market Position. It was found that Brazil was competitive from 2015 and over the years has gained competitiveness in the international product market. Germany, on the other hand, was the most competitive country followed by Belgium, Thailand and China according to the estimated indicators.
References
Balassa, B. (1965). El desarollo econômico y la integracion. Centro de Estudios Monetarios Latinoamericanos.
Bittencourt, G. M. & De Souza, K. A. (2019). Avaliação do crescimento das exportações brasileiras de soja em grão. Revista de Política Agrária. https://seer.sede.embrapa.br/index.php/RPA/article/view/1462/pdf.
Bndes (2008). Setorial: Painéis de madeira no Brasil: panorama e perspectivas. 121-156. https://web.bndes.gov.br/bib/jspui/bitstream/1408/2526/2/BS%2027%20Pain%c3%a9is%20de%20madeira%20no%20Brasil_P.pdf.
Copetti, L.S., Fries, C. D. & Coronel, D. A. (2018). Mercado Mundial do açúcar: um estudo da competitividade e do grau de concentração dos mercados brasileiros e tailandês (2000-2016). RDE – Revista de Desenvolvimento Econômico. https://revistas.unifacs.br/index.php/rde/article/view/5553/3647.
Da Silva, L. D., Et al (2021). Especialização produtiva e competitividade tecnológica das exportações piauienses o período 2009-2017. Informe Econômico (UFPI). https://periodicos.ufpi.br/index.php/ie/article/view/731.
Fao (2021). Forestry Product and Trade. http://www.fao.org/faostat/en/#data/FO.
Gonçalves, K. P. A., Et al (2020). Instituições e competitividade no comércio internacional de derivados do coco. Desenvolvimento Regional com Políticas Econômicas Estratégicas e Sustentáveis: Governos Municipais, Estaduais, e Federal integrado. http://ojs.unialfa.com.br/index.php/desenvolvimentoregional/article/view/95.
Ibá (2020). Relatório Anual 2020. https://www.iba.org/datafiles/publicacoes/relatorios/relatorio-iba-2020.pdf.
Iwakiri, S., et al (2005). Painéis de madeira reconstituída. FUPEF. Curitiba – PR.
Krugman, P., Obstfeld, M. & Melitz, M (2015). Economia internacional: teoria e política. São Paulo: Pearson Education do Brasil. (10a ed.), https://edisciplinas.usp.br/pluginfile.php/5719121/mod_resource/content/1/ECONOMIA_INTERNACIONAL_ECONOMIA_INTERNAC.pdf.
Lafay, G (1990). Le mesure des avantages comparatifs revelés. Économie Prospective Internationale, p. 27-43.
Macêdo, R. D. & Soares, N. S. (2015). O desempenho das exportações brasileiras de amêndoas de castanha-de-caju entre os anos de 2007 e 2011. Informe Gepec, Toledo, 148-162. https://e-revista.unioeste.br/index.php/gepec/article/view/10810.
Nonnenberg, M. J (1991). Vantagens comparativas reveladas, custo relativo de fatores e intensidade de recursos naturais: resultados para o Brasil: 1980/1988.
Oliveira, D. V. de, Noce, Et al (2019). Deslocamento da oferta do MDF brasileiro no período de 2008-2017. Revista Ibero-Americana de Ciências Ambientais, p. 1-7. https://www.sustenere.co/index.php/rica/article/view/CBPC2179-6858.2019.003.0001/1666.
Omc (2021). Indicadores de Comércio Internacional. https://data.wto.org/.
Ongaratto, L. C. M. (2010). A competitividade da indústria moveleira do Brasil e suas vantagens comparativas reveladas no período de 2003 a 2007. 65 p. Dissertação. Mestrado – Universidade Federal de Pernambuco – UFPE. https://repositorio.ufpe.br/bitstream/123456789/4325/1/arquivo595_1.pdf.
Petrauski, S. M. F. C., Et al (2012). Competitividade do Brasil no mercado internacional de madeira serrada. CERNE, 99 – 104, https://www.scielo.br/j/cerne/a/WZ5jXZ3bqCGRLSXB8t6vrYd/?lang=pt&format=pdf.
Pinheiro, A. C., Moreira, A. R. B. & Horta, M. H. T. T. (1992). Indicadores de competitividade das exportações: Resultados setoriais para o período 1980/88. IPEA. https://www.ipea.gov.br/portal/index.php?option=com_content&view=article&id=3282.
Santos, R. M., Pamplona, T. & Ferreira, M. J. B. (1999). Design na indústria brasileira de móveis.
Torquato, L. P (2008). Caracterização dos painéis MDF comerciais produzidos no Brasil. 94 p. Dissertação. Mestrado – Universidade Federal do Paraná – UFPR. http://www.floresta.ufpr.br/pos-graduacao/defesas/pdf_ms/2008/d515_0712-M.pdf.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Adive Cardoso Ferreira Júnior; Luysa Rocha Guimarães; Naisy Silva Soares; Christiana Cabicieri Profice
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.