Development and characterization of bioplastic composites based on corn starch with different reinforcement materials
DOI:
https://doi.org/10.33448/rsd-v11i13.35676Keywords:
Polymers; Starch; Bioplastics; Composites.Abstract
The use of synthetic polymers as raw material in industry has increased significantly in recent decades, due to the many advantages they have. However, considering the environmental impact that these non-renewable source materials can cause, the search for more sustainable alternatives, such as bioplastics, began. One of these materials is starch, easy to obtain and low cost, however, it has thermal and mechanical properties inferior to polymers. In this sense, this work aims to develop bioplastic starch composites, incorporated with different reinforcement materials, and to evaluate the influence of their addition on the polymer matrix. For this, composites based on corn starch were synthesized through the casting method, incorporated with ZnO, TiO2 and silica. Then, these were characterized by determination of moisture content, tensile and elongation tests, by SEM, FTIR and TGA analysis and soil biodegradation test. The addition of ZnO and TiO2 improved the mechanical properties of the bioplastics, but the silica sample did not obtain good results, as it did not present a good dispersion in the polymer matrix, as could be seen in the morphological analysis. All samples showed similar behavior in the analysis of infrared spectrometry and in terms of thermal stability, however the composite containing ZnO was more stable. In the biodegradation test, the composite with TiO2 showed a behavior more similar to the unfilled bioplastic. Thus, ZnO and TiO2 proved to be interesting as reinforcements to be used in starch bioplastics, especially ZnO, with potential use for several applications.
References
Abe, M. M., Branciforti, M.C., & Brienzo, M. (2021). Biodegradation of Hemicellulose-Cellulose-Starch-Based Bioplastics and Microbial Polyesters. Recycling (MDPI AG), 6(1), p. 1–21.
Abiplast - Associação brasileira da indústria do plástico (2021). Perfil 2020: a indústria de transformação e reciclagem de plásticos no Brasil. Edição especial. São Paulo: Abiplast. 50 p.
Ali, A., Yu, L., Liu, H., Khalid, S., Meng, L., & Chen, L. (2017). Preparation and characterization of starch-based composite films reinforced by corn and wheat hulls. Journal of Applied Polymer Science, 134(32), p. 45159.
Amin, M. R., Chowdhury, M. A., & Kowser, M. A. (2019). Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch. Heliyon, 5(8), p. 02009.
Azêvedo, L. C., Rovani, S., Santos, J. et al. (2020). Study of Renewable Silica Powder Influence in the Preparation of Bioplastics from Corn and Potato Starch. Journal of Polymers and the Environment, 29(3), p. 707-720.
Babapour, H., Jalali, H., & Mohammadi N. A. (2021). The synergistic effects of zinc oxide nanoparticles and fennel essential oil on physicochemical, mechanical, and antibacterial properties of potato starch films. Food Science & Nutrition, 9(7), p. 3893–3905.
Brito E. S., & Costa, D. M. A. (2019). Desenvolvimento de filmes biodegradáveis de amido incorporados com fibra de mandioca e de agave. Congresso Nacional de Pesquisa e Ensino em Ciências – CONAPESC, 2019, p. 1.
Chia, M. R., Ahmad, I., & Phang, S. W. (2022). Starch/Polyaniline Biopolymer Film as Potential Intelligent Food Packaging with Colourimetric Ammonia Sensor. Polymers, 14(6), p. 1122.
Estrela, C. (2018). Metodologia científica: Ciência, Ensino e Pesquisa. (3ª Ed.) Editora: Artes Médicas, Universidade Federal de Goiás (FO/UFG) – Goiás, 738p.
Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3(7), p. 1.
Jacobs, V., Souza, F. S., Hamm, J. B. S., & Mancilha, F. S. (2020). Produção e caracterização de biofilmes de amido incorporados com polpa de acerola. Revista Iberoamericana de Polímeros, 21(3), p. 107-119.
Jeremić, S., Milovanović, J., Mojićević, M., et al. (2020). Understanding bioplastic materials - Current state and trends. Journal of the Serbian Chemical Society, 85(12), p. 1507–1538.
Loos, M. R. (2014). Nanociência e nanotecnologia: Compósitos Termofixos Reforçados com Nanotubos de Carbono. Rio de Janeiro: Editora Interciência, 298 p.
Lopes, B. L. S. (2017). Polímeros reforçados por fibras vegetais uma visão sobre esses compósitos. São Paulo: Blucher, 44 p.
Machado, C. M., Benelli, P., & Tessaro, I. C. (2020). Study of interactions between cassava starch and peanut skin on biodegradable foams. International Journal of Biological Macromolecules, 147, p. 1343-1353.
Oleyaei, S. A., Zahedi, Y., Ghanbarzadeh, B., & Moayedi, A. A. (2016). Modification of physicochemical and thermal properties of starch films by incorporation of TiO2 nanoparticles. International Journal of Biological Macromolecules, 89, p. 256-264.
Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia da pesquisa científica. UAB/NTE/UFSM, Universidade Federal de Santa Maria – RS, 119p.
Rodrigues, N. H .P., Souza, J. T., Rodrigues, R. L., Canteri, M. H. G., Tramontin, S. M. K., & Francisco, A. C. (2020). Starch-Based Foam Packaging Developed from a By-Product of Potato Industrialization (Solanum tuberosum L.). Applied Sciences-Basel, 10, p. 2235.
Samer, M., Khalefa, Z., Abdelall, T. et al. (2019). Bioplastics production from agricultural crop residues. CIGR Journal, Giza: Agricultural Engineering International, 21(3), p. 190-194.
Severino, A. J. (2013). Metodologia do trabalho científico. 3ª Edição, Cortez Editora, São Paulo – SP, 274p.
Tamimi, N., Nafchi, A. M., Moghaddam, H. H., & Baghaie, H. (2021). The effects of nano‐zinc oxide morphology on functional and antibacterial properties of tapioca starch bionanocomposite. Food Science & Nutrition, 9(8), p. 4497–4508.
Tunma, S. (2018). Starch Based Nanocomposites in Active Packaging for Extended Shelf Life of Fresh Fruits. Walailak Journal of Science & Technology, 15(4), p. 273–281, 2018.
Zamora, Andrea Maltchik (2020). Atlas do Plástico: fatos e números sobre o mundo dos polímeros sintéticos. Fundação Henrique Böll Stiftung, 62 p.
Zhang, R., Wang, X., Cheng, M. (2018). Preparation and Characterization of Potato Starch Film with Various Size of Nano-SiO2. Polymers, Zibo: Shandong University of Technology, 10(10), p. 1172.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Caroline Moreira; Bianca Simone Schneider; Sandra Raquel Kunst; Fernando Dal Pont Morisso; Cláudia Trindade Oliveira; Tiele Caprioli Machado
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.