Case study: description of the total quality system in a cold steel rolling unit
DOI:
https://doi.org/10.33448/rsd-v8i1.570Keywords:
Quality methods; Total quality in industry; Cold rolling; SteelAbstract
The main propose of this paper is to show using the case study method to explain how the total quality system was used in the cold rolling mill of a steel industry in Brazil. Conclusions and consequences of this work may be through the implementation of the total quality system, the technical capabilities were optimized, resulting in a lower cost of production, less investment with the maximum productive capacity of each equipment and production lines, in an Ideal Cost. With this Ideal Cost, we expect a greater production volume coupled with the excellence in the quality of the cold rolled product of the steel industry.
References
GAMA, Mailson Junior Nascimento; NEGREIROS, Miguel Carlos Viana; DE SOUZA, Arnaldo Donisete. Orçamento empresarial: O Beyond Budgeting (BB) como ferramenta de gestão global da organização com ênfase nos aspectos financeiros. Revista de Contabilidade, Ciência da Gestão e Finanças, v. 5, n. 2, p. 66-84, 2018.
OLIVEIRA, Marcelle Colares. Análise dos periódicos brasileiros de contabilidade. Revista Contabilidade & Finanças, v. 13, n. 29, p. 68-86, 2002.
NAHMIAS-WOLINSKY, Yael. Models, numbers, and cases: methods for studying international relations. University of Michigan Press, 2004.
SCHNEIDER, Ronald M. Brazil: culture and politics in a new industrial powerhouse. Routledge, 2018.
SOUZA, Wellington Rodrigues Silva et al. Twenty-one years without monetary correction in Brazil: impacts on the comparability of the accounting information of siderurgical and metallurgical companies. Revista Contabilidade & Finanças, n. AHEAD, 2018.
RODRIGUES, Alyson Da Luz Pereira et al. A utilização do ciclo PDCA para melhoria da qualidade na manutenção de shuts. Iberoamerican Journal of Industrial Engineering, v. 9, n. 18, p. 48-70, 2017.
DO NASCIMENTO, Adelson Pereira et al. A estratégia da qualidade ou a qualidade da estratégia? Uma avaliação da adoção da gestão estratégica na norma ABNT NBR ISO 9001: 2015. Sistemas & Gestão, v. 12, n. 1, p. 57-69, 2017.
LADEIRA, Marcelo Bronzo et al. Gestão de processos, indicadores analíticos e impactos sobre o desempenho competitivo em grandes e médias empresas brasileiras dos setores da indústria e de serviços. Gestão & Produção, v. 19, n. 2, p. 389-404, 2012.
PIVA, Allan Michel Simões; PRANDO, Gerson; MORILLA, José Carlos. Comparative study between methodology types Lean Manufacturing and Lean Six Sigma. Unisanta Science and Technology, v. 5, n. 2, p. 96-103, 2017.
WERKEMA, Cristina. Ferramentas Estatísticas Básicas do Lean Seis Sigma Integradas: PDCA e DMAIC. Elsevier Brasil, 2016.
DE JESUS PACHECOA, Diego Augusto. Teoria das Restrições, Lean Manufacturing e Seis Sigma: limites e possibilidades de integração. Production, v. 24, n. 4, p. 940-956, 2014.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
