Surface treatment with silver particles isles on Titanium cp: study of antimicrobial activity
DOI:
https://doi.org/10.33448/rsd-v9i4.2662Keywords:
Surface treatment; Antimicrobial activity; Dental Implants; Silver Nanoparticles.Abstract
During the last decades, researchers have been growing the interest in surface treatment with an antimicrobial agent. Silver nanoparticles (AgNPs) are widely used in biomedical fields due to their potent antimicrobial activity. So, in this study was investigated silver particles (isles) coated on titanium surface for dental and orthopedic application. Silver particles coating process on titanium surface were performed via sputtering that is a plasma-assisted deposition technique with and titanium without treatment was applied as comparing standard. Plasma treatment parameters were optimized so that the result was not a thin film of Ag but dispersed particles of Ag on the Ti-cp surface. The alloy surfaces were investigated using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). In order to investigate antibacterial potential Staphylococcus aureus and Escherichia coli have been used at Agar diffusion assay. The results were analyzed by analysis of variance (ANOVA) in order to verify significant difference antimicrobial activity between samples that have shown no difference between the surfaces studied treatments. For silver deposition scattered particles (isles) over titanium surface for a 10-minute treatment, EDS revealed by silver clusters that the particles were not properly scattered onto surface, hence, the low effectiveness in antibacterial activity.
References
Abdel-Fatah, W. I., Gobara, M. M., Mustafa, S. F. M., Ali, G. W., & Guirguis, O. W. (2016). Role of silver nanoparticles in imparting antimicrobial activity of titanium dioxide. Materials Letters, 179, 190–193.
Arifagaoglu, O., Oncul, S., Ercan, A., Olcay, O., & Ersu, B. (2019). HGF-1 Proliferation on Titanium Dental Implants Treated with Laser Melting Technology.
Arnell, R. D., & Kelly, P. J. (1999). Recent advances in magnetron sputtering," Surface and Coatings Technology. Surface and Coatings Technology, 112, 170–176.
Bellantone, M., Williams, H. D., & Hench, L. L. (2002). Broad-Spectrum Bactericidal Activity of Ag 2 O-Doped Bioactive Glass. ANTIMICROBIAL AGENTS AND CHEMOTHERAPY, 46(6), 1940–1945.
Carlsson, G. E. (2014). Implant and root supported overdentures - a literature review and some data on bone loss in edentulous jaws. The Journal of Advanced Prosthodontics, 6(4), 245.
Clupper, D. C., & Hench, L. L. (2001). Bioactive response of Ag-doped tape cast Bioglass® 45S5 following heat treatment. Journal of Materials Science: Materials in Medicine, 12(10–12), 917–921.
Cruz, M. A. E., Zanatta, M. B. T., da Veiga, M. A. M. S., Ciancaglini, P., & Ramos, A. P. (2019). Lipid-mediated growth of SrCO 3 /CaCO 3 hybrid films as bioactive coatings for Ti surfaces. Materials Science and Engineering C, 99(July 2018), 762–769.
Durán, N., Durán, M., de Jesus, M. B., Seabra, A. B., Fávaro, W. J., & Nakazato, G. (2016). Silver nanoparticles: A new view on mechanistic aspects on antimicrobial activity. Nanomedicine: Nanotechnology, Biology and Medicine, 12(3), 789–799.
Fernández-Yagüe, M., Antoñanzas, R. P., Roa, J. J., Biggs, M., Gil, F. J., & Pegueroles, M. (2019). Enhanced osteoconductivity on electrically charged titanium implants treated by physicochemical surface modifications methods. Nanomedicine: Nanotechnology, Biology, and Medicine, 18, 1–10.
Gulati, K., Maher, S., Findlay, D. M., & Losic, D. (2016). Titania nanotubes for orchestrating osteogenesis at the bone–implant interface. Nanomedicine, 11(14), 1847–1864.
Hirsch, U. M., Teuscher, N., Rühl, M., & Heilmann, A. (2019). Plasma-enhanced magnetron sputtering of silver nanoparticles on reverse osmosis membranes for improved antifouling properties. Surfaces and Interfaces, 16, 1–7.
Høiby, N., Henneberg, K.-Å., Wang, H., Stavnsbjerg, C., Bjarnsholt, T., Ciofu, O., … Sams, T. (2019). Formation of Pseudomonas aeruginosa inhibition zone during tobramycin disk diffusion is due to transition from planktonic to biofilm mode of growth. International Journal of Antimicrobial Agents, 53(5), 564–573.
Javadi, A., Solouk, A., Haghbin Nazarpak, M., & Bagheri, F. (2019). Surface engineering of titanium-based implants using electrospraying and dip coating methods. Materials Science and Engineering: C, 99, 620–630.
Kim, J. S., Kuk, E., Yu, K. N., Kim, J. H., Park, S. J., Lee, H. J., … Cho, M. H. (2007). Antimicrobial effects of silver nanoparticles. Nanomedicine: Nanotechnology, Biology, and Medicine, 3(1), 95–101.
Li, W., Yang, Y., Zhang, H., Xu, Z., Zhao, L., Wang, J., Liu, B. (2019). Improvements on biological and antimicrobial properties of titanium modified by AgNPs-loaded chitosan-heparin polyelectrolyte multilayers. Journal of Materials Science: Materials in Medicine, 30(5), 52.
Naoi, K., Ohko, Y., & Tatsuma, T. (2004). TiO2 Films Loaded with Silver Nanoparticles: Control of Multicolor Photochromic Behavior. Journal of the American Chemical Society, 126(11), 3664–3668.
Okazaki, K., Kiyama, T., Hirahara, K., Tanaka, N., Kuwabata, S., & Torimoto, T. (2008). Single-step synthesis of gold–silver alloy nanoparticles in ionic liquids by a sputter deposition technique. Chem. Commun., 0(6), 691–693.
Okumu, J., Dahmen, C., Sprafke, A. N., Luysberg, M., Von Plessen, G., & Wuttig, M. (2005). Photochromic silver nanoparticles fabricated by sputter deposition. J. Appl. Phys, 97, 94305.
Pareek, V., Gupta, R., & Panwar, J. (2018). Do physico-chemical properties of silver nanoparticles decide their interaction with biological media and bactericidal action? A review. Materials Science and Engineering: C, 90, 739–749.
Pye, A. D., Lockhart, D. E. A., Dawson, M. P., Murray, C. A., & Smith, A. J. (2009). A review of dental implants and infection. Journal of Hospital Infection, 72, 104–110.
Shimabukuro, M., Tsutsumi, Y., Yamada, R., Ashida, M., Chen, P., Doi, H., … Hanawa, T. (2019). Investigation of realizing both antibacterial property and osteogenic cell compatibility on titanium surface by simple electrochemical treatment. ACS Biomaterials Science & Engineering.
Surmenev, R. A. (2012). A review of plasma-assisted methods for calcium phosphate-based coatings fabrication. Surface and Coatings Technology, 206(8–9), 2035–2056.
Zhang, E., Li, F., Wang, H., Liu, J., Wang, C., Li, M., & Yang, K. (2013). A new antibacterial titanium-copper sintered alloy: Preparation and antibacterial property. Materials Science and Engineering C, 33(7), 4280–4287.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
