Evaluation of surface changes in glass-ceramics submitted to artificial aging by simulated brushing
DOI:
https://doi.org/10.33448/rsd-v11i9.31081Keywords:
Glass-ceramics; Simulated brushing; Artificial aging.Abstract
The aim of this study was to evaluate the surface changes of glass ceramics, submitted to artificial aging by simulated brushing with different toothpastes, using a brushing machine designed by the authors. Twenty-four specimens were made in the form of an upper right central incisor, in color A1 and made up in color A3; divided into 4 groups with n =6. The mechanical tests were performed by a brushing machine at an ambient temperature of 37ºC, with a frequency of 250 strokes per minute, under 250mg brush pressure and simultaneous dripping of the dentifrice solution. Test times were divided into: 0; 25,000; 50,000; 75,000; 100,000; 125,000 and 150,000 strokes and the parameters analyzed by a rugosimeter. The obtained values of surface roughness (SR) were submitted to the Kolmogorov-Smirnov test (p=0.321) to verify the normality of the data distribution and, later, to the Levene test (p=0.076). The results obtained showed that the aging time did not influence the surface roughness of the glass ceramics, there were differences in surface roughness in some toothpastes. Thus, it can be concluded that the glass ceramics were susceptible to mass loss, but resistant to the action of toothpastes. Dentifrices with anti-plaque and anti-tartar characteristics can change the surface over time.
References
Al-Marzok, M. I., & Al-Azzawi, H. J. (2009). The effect of the surface roughness of porcelain on the adhesion of oral Streptococcus mutans. The journal of contemporary dental practice, 10(6), E017–E24.
Alnasser, M., Finkelman, M., Papathanasiou, A., Suzuki, M., Ghaffari, R., & Ali, A. (2019). Effect of acidic pH on surface roughness of esthetic dental materials. The Journal of prosthetic dentistry, 122(6), 567.e1–567.e8. https://doi.org/10.1016/j.prosdent.2019.08.022
Bollen, C. M., Lambrechts, P., & Quirynen, M. (1997). Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dental materials: official publication of the Academy of Dental Materials, 13(4), 258–269. https://doi.org/10.1016/s0109-5641(97)80038-3
Brasil. Ministério da Saúde. Resolução da Diretoria Colegiada – RDC n. 04, de 30 de janeiro de 2014. Dispõe sobre os requisitos técnicos para a regularização de produtos de higiene pessoal, cosméticos e perfumes e dá outras providências, conforme Anexos I e II desta Resolução.
Butler, C. J., Masri, R., Driscoll, C. F., Thompson, G. A., Runyan, D. A., & Anthony von Fraunhofer, J. (2004). Effect of fluoride and 10% carbamide peroxide on the surface roughness of low-fusing and ultra low-fusing porcelain. The Journal of prosthetic dentistry, 92(2), 179–183. https://doi.org/10.1016/j.prosdent.2004.04.025
Callicchio, L., Kyrillos, M., Morreira, M. & Nhoncance, W. (2015). Precision: os segredos da odontologia estética minimamente invasiva fragmentos e lentes de contato. Quintessence.
Castro, H. L., Pereira, P. C., Feitosa, A. S., Valera, M. C., Araujo, M. A. M. & Araujo, R.M. (2014). Influence of brushing on a machined lithium disilicate-based ceramic: assessment of color maintenance and surface roughness. RFO UPF, 19(1), 83-7.
Esquivel-Upshaw, J. F., Dieng, F. Y., Clark, A. E., Neal, D., & Anusavice, K. J. (2013). Surface degradation of dental ceramics as a function of environmental pH. Journal of dental research, 92(5), 467–471. https://doi.org/10.1177/0022034513484332
Esquivel-Upshaw, J. F., Ren, F., Hsu, S. M., Dieng, F. Y., Neal, D., & Clark, A. E. (2018). Novel Testing for Corrosion of Glass-Ceramics for Dental Applications. Journal of dental research, 97(3), 296–302. https://doi.org/10.1177/0022034517732283
Fathy, S. M., & Swain, M. V. (2018). In-vitro wear of natural tooth surface opposed with zirconia reinforced lithium silicate glass ceramic after accelerated ageing. Dental materials: official publication of the Academy of Dental Materials, 34(3), 551–559. https://doi.org/10.1016/j.dental.2017.12.010
Firouz, F., Vafaee, F., Khamverdi, Z., Khazaei, S., Gholiabad, S. G., & Mohajeri, M. (2019). Effect of Three Commonly Consumed Beverages on Surface Roughness of Polished and Glazed Zirconia-Reinforced Lithium Silicate Glass Ceramics. Frontiers in dentistry, 16(4), 296–302. https://doi.org/10.18502/fid.v16i4.2089
Flury, S., Diebold, E., Peutzfeldt, A., & Lussi, A. (2017). Effect of artificial toothbrushing and water storage on the surface roughness and micromechanical properties of tooth-colored CAD-CAM materials. The Journal of prosthetic dentistry, 117(6), 767–774. https://doi.org/10.1016/j.prosdent.2016.08.034
Garza, L. A., Thompson, G., Cho, S. H., & Berzins, D. W. (2016). Effect of toothbrushing on shade and surface roughness of extrinsically stained pressable ceramics. The Journal of prosthetic dentistry, 115(4), 489–494. https://doi.org/10.1016/j.prosdent.2015.09.013
Glavina, D., Skrinjaric, I., Mahovic, S., & Majstorovic, M. (2004). Surface quality of Cerec CAD/CAM ceramic veneers treated with four different polishing systems. European journal of paediatric dentistry, 5(1), 30–34.
Gomes, E. A., Assunção, W. G., Rocha, E. P. & Santos, P. H. (2008). Cerâmicas odontológicas: O estado atual. Cerâmica, 54(1), 319-325.
Heintze, S. D., Forjanic, M., Ohmiti, K., & Rousson, V. (2010). Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load. Dental materials: official publication of the Academy of Dental Materials, 26(4), 306–319. https://doi.org/10.1016/j.dental.2009.11.152
Hsu, S. M., Ren, F., Batich, C. D., Clark, A. E., Neal, D., & Esquivel-Upshaw, J. F. (2020). Effect of pH Cycling Frequency on Glass-Ceramic Corrosion. Materials (Basel, Switzerland), 13(16), 3655. https://doi.org/10.3390/ma13163655
Kulkarni, A., Rothrock, J., & Thompson, J. (2020). Impact of Gastric Acid Induced Surface Changes on Mechanical Behavior and Optical Characteristics of Dental Ceramics. Journal of prosthodontics: official journal of the American College of Prosthodontists, 29(3), 207–218.
Li, R. W., Chow, T. W., & Matinlinna, J. P. (2014). Ceramic dental biomaterials and CAD/CAM technology: state of the art. Journal of prosthodontic research, 58(4), 208–216. https://doi.org/10.1016/j.jpor.2014.07.003
Magne, P. & Belser, U. (2012). Restaurações adesivas de porcelanas na dentição anterior: uma abordagem biomimética. Quintessence.
Mühlemann, S., Bernini, J. M., Sener, B., Hämmerle, C. H., & Özcan, M. (2019). Effect of Aging on Stained Monolithic Resin-Ceramic CAD/CAM Materials: Quantitative and Qualitative Analysis of Surface Roughness. Journal of prosthodontics: official journal of the American College of Prosthodontists, 28(2), e563–e571. https://doi.org/10.1111/jopr.12949
Nogués, L., Martinez-Gomis, J., Molina, C., Peraire, M., Salsench, J., Sevilla, P., & Gil, F. J. (2008). Dental casting alloys behaviour during power toothbrushing with toothpastes with various abrasivities. Part I: wear behavior. Journal of materials science. Materials in medicine, 19(9), 3041–3048. https://doi.org/10.1007/s10856-008-3433-2
Rios, A. C. F., Lopes, S. C. F. L., Dantas, T. S., Oliveira, V. M. B. & Santos, L. B. (2014). ABRASIVOS: uma análise de dentifrícios comercializados em Salvador. Rev Bahiana Odontol, 5(3),141-52.
Rosentritt, M., Sawaljanow, A., Behr, M., Kolbeck, C., & Preis, V. (2015). Effect of tooth brush abrasion and thermo-mechanical loading on direct and indirect veneer restorations. Clinical oral investigations, 19(1), 53–60. https://doi.org/10.1007/s00784-014-1209-2
Sar Sancakli, H., Austin, R. S., Al-Saqabi, F., Moazzez, R., & Bartlett, D. (2015). The influence of varnish and high fluoride on erosion and abrasion in a laboratory investigation. Australian dental journal, 60(1), 38–42. https://doi.org/10.1111/adj.12271
Silva, A. D. L., Silva, C. D. B. & Catão, M. H. C. V. (2012). Avaliação do pH de substâncias clareadoras caseiras a 10%, 16% e 22%. Rev. Dentística online, 11(23), 05-10.
Yuan, J. C., Barão, V., Wee, A. G., Alfaro, M. F., Afshari, F. S., & Sukotjo, C. (2018). Effect of brushing and thermocycling on the shade and surface roughness of CAD-CAM ceramic restorations. The Journal of prosthetic dentistry, 119(6), 1000–1006. https://doi.org/10.1016/j.prosdent.2017.06.001
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Daniel Roberto Fernandes; Fernando Martins Baeder; Daniel Furtado Silva; Ana Carolina Lyra de Albuquerque; Dênis Clay Lopes dos Santos; Antônio Francisco David; Flávio Artur Rego Farias; lson Masaru Yasunaka; Pedro Paulo Feltrin; Raquel Virgínia Zanetti
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
