The use of prevention through design as a management tool: a systematic review

Authors

DOI:

https://doi.org/10.33448/rsd-v11i9.32442

Keywords:

Prevention through design; Project management; Risks; Civil construction.

Abstract

The Prevention Through Design – PtD can be used as a project management and coordination tool, which aims to reduce the number of accidents in civil construction. Therefore, it is necessary to understand the occupational health and safety scenario to establish preventive control measures. In this sense, it is important that prevention is effective, whether in the concept design or execution phase. Thus, this study aims to investigate works that have addressed the PtD, seeking to analyze its usability as a management tool, also pointing out its positive and negative aspects. The methodology followed the guidelines of the Preferred Report Items for Systematic Reviews and Meta-Analysis (PRISMA), using keywords in agreement with the Boolean descriptor “AND” such as: “prevention through design”, “management”, “construction”, “occupational safety”, “design” and “design for safety”. Initially, 624 articles were found, but with the application of filters, 30 articles remained for full reading. After the complete reading, 14 articles were included for detailed analysis. It was observed that in underdeveloped countries, the tool is not applied. However, in more developed countries the Prevention Through Design – PtD tool is highly requested for accident prevention. Finally, it is understood that there is a cost linked to the accident management tool, however it is seen that when it is implemented, the number of accidents is reduced, which makes the tool effective.

References

Adaku, E.; Ankrah, N. A.; Ndekugri, I. E. (2021). Prevention through design: conceptual models for the assessment of a principal designer’s skills, knowledge and experience. Journal of Engineering, Design and Technology. 1–58.

CBIC. (2017). Guia Para Gestão de Segurança Nos Canteiros de Obra: Orientação Para Prevenção Dos Acidentes E Para O Cumprimento Das Normas de SST.

DATAPREV. (2016). Empresa de Tecnologia e Informações da Previdência Social.

Driscoll, T. R., Harrison, J.E., Bradely, C., Newson, R.S. (2021). The role of design issues in work-related fatal injury in Australia. J. Saf. Res. 39, 209–214.

Fargnoli, M.; Lombardi, M. (2020). Building information modelling (BIM) to enhance occupational safety in construction activities: Research trends emerging from one decade of studies. Buildings. 10(6).

Goh, Y. M.; Chua, S. (2016). Knowledge, attitude and practices for design for safety: A study on civil & structural engineers. Accident Analysis and Prevention. 93, 260–266.

Hossain, Md. A.; Abbott, E. L. S; Chua, D, K. H.; Qui, N. T.; Goh, Y. M. (2018). Design-for-safety knowledge library for BIM-integrated safety risks review. Automation in Construction. 94, 290-302.

Ibrahim, C. K. I. et al. (2019). Exploring the knowledge of Prevention through Design (PtD) among Malaysian civil & structural designers. IOP Conference Series: Materials Science and Engineering. 615(1).

Ibrahim, C. K. I. et al. (2020). Key attributes of designers’ competency for prevention through design (PtD) practices in construction: a review. Engineering, Construction and Architectural Management. 28(4), 908–933.

Izam, C. K. (2021). Prevention through Design (PtD) Education for Future Civil Engineers in Malaysia: Current State, Challenges, and Way Forward. Journal of Civil Engineering Education. 147(1).

Jin, Z. et al. (2019). Using 4D BIM to assess construction risks during the design phase. Engineering, Construction and Architectural Management. 26(11), 2637–2654.

Lee, Y.; Kim, I.; Choi, J. (2020). Development of BIM-based risk rating estimation automation and a design-for-safety review system. Applied Sciences (Switzerland), 10(11).

Liberati A.; Altman D.G.; Tetzlaff J.; Mulrow C.; Gøtzsche P.C.; Ioannidis J.P.; Clarke M.; Devereaux P.J.; Kleijnen J.; Moher D. (2009) The PRISMA statement for reporting systematic reviews and metaanalyses of studies that evaluate health care interventions :explanation and elaboration. BMJ.

Lovatto, P. A. et al. Meta-análise em pesquisas científicas: enfoque em metodologias. Revista Brasileira de Zootecnia, v. 36, n. 7, p. 285–294, 2009.

Manu, P.; Poghosyan, A.; Mahamadu, A. M.; et al. (2019). Design for occupational safety and health: key attributes for organisational capability. Engineering, Construction and Architectural Management. 26(11), 2614–2636.

Manu, Patrick; Poghosyan, Anush, Mshelia; Ibrahim Mark; Iwo, Samuel Tekena; Mahamadu, Abdul-Majeed & Dziekonski, Krzysztof (2018): Design for Occupational Safety and Health of Workers in Construction in Developing Countries: A Study of Architects in Nigeria, International Journal of Occupational Safety and Ergonomics.

Munzlinger, E.; Narcizo, F.B.; De Queiroz, J.E.R. (2012). Sistematização de Revisões Bibliográficas em Pesquisas da Área de IHC. Brazilian Computer Society, [S.1.], 5138, 51-54.

Soh, J.; Jeong, Jaewook; Jeong, Jaemin. (2020). Improvements of design for safety in construction through multi-participants perception analysis. Applied Sciences (Switzerland). 10(13).

Sun, Xinlu; Liao, Pinchao. (2019). A System Dynamics Model of Prevention through Design Regarding Unsafe Behavior in Construction. International Conference on Construction and Real Estate Management. IOP Conf. Series: Materials Science and Engineering .615

Toh, Y. Z.; Goh, Y. M.; Guo, B. H. W. (2017). Knowledge, Attitude, and Practice of Design for Safety: Multiple Stakeholders in the Singapore Construction Industry. Journal of Construction Engineering and Management. 143(5), 04016131.

Toole, T. M.; Erger, K. (2019). Prevention through Design: Promising or Perilous? Journal of Legal Affairs and Dispute Resolution in Engineering and Construction. 11(1), 04518023.

Toole, M.; Gambatese, J. (2008). The trajectories of prevention through design in construction. Journal of Safety Research. (39), 225–230.

Vasconcelos, B. M. V. (2013). Segurança no Trabalho na Construção: Modelo de gestão de prevenção de acidentes para a fase de concepção. 181 p. Tese (Doutorado) – Faculdade de Engenharia da Universidade do Porto, Porto.

Downloads

Published

19/07/2022

How to Cite

CAVALCANTI, L. R.; ARRUDA, V. K. F. de; FIGUEIRA, A. de M. A.; BAÍA, J. F. B.; MOURA JÚNIOR, J. M. de; MONTEIRO, E. C. B.; VASCONCELOS, B. M.; MELHADO, S. B. The use of prevention through design as a management tool: a systematic review. Research, Society and Development, [S. l.], v. 11, n. 9, p. e58411932442, 2022. DOI: 10.33448/rsd-v11i9.32442. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/32442. Acesso em: 22 nov. 2024.

Issue

Vol. 11 No. 9

Section

Engineerings

License

Copyright (c) 2022 Lucas Rodrigues Cavalcanti; Vanessa Kelly Freitas de Arruda; Amanda de Morais Alves Figueira; João Felipe Barbosa Baía; José Maria de Moura Júnior; Eliana Cristina Barreto Monteiro; Bianca M. Vasconcelos; Silvio Burrattino Melhado

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.