Resin coating, an alternative in dentinal sealing techniques: A literature review
DOI:
https://doi.org/10.33448/rsd-v13i6.45892Keywords:
Resin containment; Adhesion; Dentin; Oral rehabilitation; Dental sensitivity; Dentin sealing.Abstract
Resin coating is a dentin sealing technique, used in a wide branch of dentistry. This technique was invented in Japan in the early 1990s by doctors who were experts in adhesive systems, which have had great evolution over the years. However, having a wide spectrum of adhesive systems, in the resin coating technique the self-etch adhesive is recommended. After countless investigations, it was possible to discover the existence of a new zone that improves adhesion, called the acid-base resistant zone (ABR), which is created by the penetration of the monomer into the dentin and thanks to the chemical bond with the smear particles. dentin, it must be considered that this is only produced thanks to self-etching adhesive systems. This technique has also helped in different areas of dentistry and not only in dental surgery, such as endodontics, prosthodontics, and even a new thin film system has been developed, to be able to have a better result in indirect restorations and so that they do not interfere. because of its thickness.
References
Nikaido, T, R, Takahashi, M A, Alireza S, & Junji, T. (2012). Protection and Reinforcement of Tooth Structures by Dental Coating Materials. Coatings 2, no. 4: 210-220. https://doi.org/10.3390/coatings2040210
Nikaido, T., Inoue, G., Takagaki, T. et al. (2015). Resin Coating Technique for Protection of Pulp and Increasing Bonding in Indirect Restoration. Curr Oral Health Rep 2, 81–86 (2015). https://doi.org/10.1007/s40496-015-0046-y
Nikaido, T., Tagami, J., Yatani, H., Ohkubo, C., Nihei, T., Koizumi, H., Maseki, T., Nishiyama, Y., Takigawa, T. & Tsubota, Y. (2018). Concept and clinical application of the resin-coating technique for indirect restorations. Dental Materials Journal, 37(2), 192–196. https://doi.org/10.4012/dmj.2017-253
Jayasooriya, P. R., Pereira, P. N. R., Nikaido, T. & Tagami, J. (2003), Efficacy of a Resin Coating on Bond Strengths of Resin Cement to Dentin. Journal of Esthetic and Restorative Dentistry, 15: 105-113. https://doi.org/10.1111/j.1708-8240.2003.tb00325.x
Kumar, P, & Rohit Sabnis, V. (2015). Effect of Immediate dentin sealing in prevention of postcementation hypersensitivity in fullcoverage restorations. J Med Sci. 2015, 14(5): 80-84p.
Pashley D. (1996). Dynamics of the pulpo – dentina complex. Crit Rev Oral Biol Med. 7(2): 104-133p.
Sultana S, Nikaido T et al. (2007). Effect of resin coating on dentin bonding of resin cement in Class II cavities. J Dent Materials. 2007, 26(4): 506-13p
&Francisconi L F, Scafa P M C, Barros V R, Coutinho M. & Francisconi P A S. (2009). Glass ionomer cements and their role in the restoration of non-carious cervical lesions. J Appl Oral Sci. 17(5):364–9.
Tomoaki, U. D. O., Nikaido, T., Ikeda, M., Weerasinghe, D. S., Harada, N., Foxton, R. M., & Tagami, J. (n.d.). Enhancement of adhesion between resin coating materials and resin cements. Jst.Go.Jp. https://www.jstage.jst.go.jp/article/dmj/26/4/26_4_519/_pdf/-char/en
Islam, M. R., Takada, T., Weerasinghe, D. S., Uzzaman, M. A., Foxton, R. M., Nikaido, T., & Tagami, J. (n.d.). Effect of resin coating on adhesion of composite crown restoration. Jst.Go.Jp. https://www.jstage.jst.go.jp/article/dmj/25/2/25_2_272/_pdf/-char/en
Sato, T., Takahashi, R., Rozan, S., Uchiyama, S., Baba, Y., Vicheva, M., Sato, A., Ikeda, M., Takagaki, T., Nikaido, T., & Tagami, J. (2021). The effect of temporary sealing materials and cleaning protocols on the bond strength of resin cement applied to dentin using the resin-coating technique. Dental Materials Journal, 40(3), 719–726. https://doi.org/10.4012/dmj.2020-234
Pilo, R., Ben-Amar, A., Barnea, A. et al. (2017). The effect of resin coating on the shear punch strength of restorative glass ionomer cements. Clin Oral Invest 21, 1079–1086 (2017). https://doi.org/10.1007/s00784-016-1862-8
Shuzo K, Nasser A., Nasser, P P,,Ron F. W, Toru Nikaido, J T, Timothy F. W. & Richard M. F. (2011) Effect of resin coating and occlusal loading on microleakage of class II computer-aided design/computer-aided manufacturing fabricated ceramic restorations: A confocal microscopic study, Acta Odontologica Scandinavica, 69:3, 182-192, DOI: 10.3109/00016357.2010.549504
Kosaka, S., Kajihara, H., Kurashige, H., & Tanaka, T. (2005). Effect of resin coating as a means of preventing marginal leakage beneath full cast crowns. Dental Materials Journal, 24(1), 117–122. https://doi.org/10.4012/dmj.24.117 Peters MC, McLean ME. Minimally invasive operative care. I. Minimal intervention and concepts for minimally invasive cavity preparations. J Adhes Dent 2001, 3: 7–16.
Ariyoshi, M., Nikaido, T., Foxton, R. M., & Tagami, J. (n.d.). Microtensile bond strengths of composite cores to pulpal floor dentin with resin coating. Jst.Go.Jp. from https://www.jstage.jst.go.jp/article/dmj/27/3/27_3_400/_pdf/-char/en
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Jhonatan Sebastián Villacis Manosalvas; Omar Ricardo Alvarado Jimenez
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
