Digital workflows for anchoring implants in the zygomatic bone
DOI:
https://doi.org/10.33448/rsd-v13i11.47224Keywords:
Dental implants; Zygoma; Bone resorption; Digital health.Abstract
This study aims to conduct a literature review on digital workflows in the anchoring of implants in the zygomatic bone, focusing on digital planning, and to demonstrate how these technologies influence the increase in safety and predictability of the procedure. A bibliographic survey was conducted in the PubMed database, using the following descriptors in English: “dental implants” AND “zygoma” AND “bone resorption” AND “digital health”. The inclusion criteria were studies with a relevant approach to the proposed theme; while the exclusion criteria were course completion papers, articles on animals, literature reviews and articles that were not in line with the theme addressed. The study concludes that the application of digital workflows in the planning of oral rehabilitation with zygomatic implants offers significant improvements in safety and accuracy. However, the effectiveness of these technologies depends on the professional's learning curve, without excluding the importance of the surgeon's experience and skills.
References
Al Yafi, F., Camenisch, B. & Al-Sabbagh, M. (2019). Is Digital Guided Implant Surgery Accurate and Reliable? Dental Clinics of North America - Journal. https://doi.org/10.1016/j.cden.2019.02.006.
Baan, F., Bruggink, R., Nijsink, J., Maal, T.J.J. & Ongkosuwito, E. M. (2021). Fusion of intra-oral scans in cone-beam computed tomography scans. Clinical Oral Investigations 25:77–85. https://doi.org/10.1007/s00784-020-03336-y.
Chow, J. (2016). A novel device for template-guided surgery of the zygomatic implants. International Journal Oral Maxillofacial Surgeons. 2016; International Association of Oral and Maxillofacial Surgeons. http://dx.doi.org/10.1016/j.ijom.2016.06.007
Chrcanovic, B. R.; Oliveira, D. R. & Custódio, A.L. (2010). Accuracy evaluation of computed tomography-derived stereolithographic surgical guides in zygomatic implant placement in human cadavers. J Oral Implantol. 2010;36(5):345-55. DOI: 10.1563/AAID-JOI-D-0900074. PMID: 20545538.
Crossetti, M. G. M. (2012). Revisión integradora de la investigación en enfermería el rigor científico que se le exige. Maria Da Graça Oliveira Crossetti. Rev. Gaúcha Enferm. 33 (2): 8-9.
González Rueda, J. R., García Ávila, I., de Paz Hermoso, V. M., Deglow, E. R.; Zubizarreta-Macho, Á., Mourelo, J. P., Martín, J. M. & Montero, S. H. (2022). Accuracy of a Computer-Aided Dynamic Navigation System in the Placement of Zygomatic Dental Implants: An In Vitro Study. Journal of Clinical Medicine. 2022, 11, 1436. https://doi.org/10.3390/jcm11051436.
Gomes, J. M. L. et al., (2020). Use of CAD/CAM systems in rehabilitation with zygomatic implants: precision and predictability in digital planning. Journal of Implantology and Digital Dentistry, 11(3), 250-260.
Jensen, B. et al., (2020). The advantages include greater precision, reduced surgical time, and predictability of outcomes, especially in cases with complex anatomy. Journal of Surgical Innovations, 14(3), 88-99.
Johnson, R. et al., (2020). Specialized training: The adoption of this technology requires specialized training, which can be an obstacle for some professionals. Journal of Medical Innovation and Technology, 16(2), 67-78.
Jones, L., Taylor, M. & Roberts, P. (2020). Precise surgical planning: The use of 3D-printed models enables detailed surgical planning, reducing surgery time and minimizing complications. Research indicates that preoperative planning can reduce surgical time by up to 30%. Journal of Medical Innovations, 12(2), 123-134.
Manacorda, M., Chaurand, B. P., Merlone, A., Teté, G., Mottola, F. & Vinci, R. (2020). Reabilitação Virtual de Implantes em Pacientes com Maxila Severamente Atrófica. Dentistry Journal 2020, 8, 14. DOI:10.3390/dj8010014.
Mattos, P. C. (2015). Tipos de revisão de literatura. Unesp, 1-9. https://www.fca.unesp.br/Home/Biblioteca/tipos-de-evisao-de-literatura.pdf.
Migliorança, R.M., Sotto-Maior, B.S., Senna, P.M., Francischone, C.E. & Cury, A. A. B. (2012). Immediate occlusal loading of extrasinus zygomatic implants: A prospective cohort study with a follow-up period of 8 years. International Journal of Oral Maxillofac. Surg. 2012; 41: 1072–1076. 2012. International Association of Oral and Maxillofacial Surgeons. http://dx.doi.org/10.1016/j.ijom.2012.05.029
Miller, A. et al., (2022). Facilitation of patient communication: Prototyping allows patients to visualize the surgical procedure, improving understanding and increasing confidence in treatment. Journal of Medical Technology and Innovation, v. 18, n. 1, p. 25-36, 2022.
Ngamprasertkit, C., Aunmeungthong, W. & Khongkhunthian, P. (2021). The implant position accuracy between using only surgical drill guide and surgical drill guide with implant guide in fully digital workflow: a randomized clinical trial. Oral and Maxillofacial Surgery. May 2021. https://doi.org/10.1007/s10006-021-00975-7
OH, J., Xueyin, A., Jeong, S. & Choi, B. (2017). Digital Workflow for Computer-Guided Implant Surgery in Edentulous Patients: A Case Report. American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 75:2541-2549, 2017. http://dx.doi.org/10.1016/j.joms.2017.08.008
Pascuala, D. & Vaysseb, J. Chirurgie implantaire et prothe `se guide ´es et assiste´es par ordinateur : le flux nume ´rique continu. Rev Stomatol Chir Maxillofac Chir Orale 2015;1-8 2213-6533/ 2015 Elsevier Masson SAS. Tous droits re´serve ´s. http://dx.doi.org/10.1016/j.
Pereira A. S. et al. (2018). Metodologia da pesquisa científica. [free e-book]. Santa Maria/RS. Ed. UAB/NTE/UFSM.
Schiroli, G., Angiero, F.; Silvestrini-Biavati, A. & Benedicenti, S. (2011). Zygomatic Implant Placement With Flapless Computer-Guided Surgery: A Proposed Clinical Protocol. American Association of Oral and Maxillofacial Surgeons. Journal of Oral and Maxillofacial Surgery 69:2979-2989, 2011. DOI:10.1016/j.joms.2011.03.050
Silva, R. & Martins, G. (2021). The role of CAD/CAM systems and guided surgery in the placement of zygomatic implants: digital workflow and outcomes. Journal of Oral Implantology and Technology, 13(2), 145-160, 2021.
Vandenberghe, B. (2018). The digital patient– Imaging science in dentistry. Journal of Dentistry 74(2018) S21–S26. https://doi.org/10.1016/j.jdent.2018.04.019
Vosselman, N., Glas, H. H., Visscher, S. A. H. J., Kraeima, J., Merema, B. J., Reintsema, H., Raghoebar, G. M. & Witjes, M. J. H. (2021). Immediate implant-retained prosthetic obturation after maxillectomy based on zygomatic implant placement by 3D-guided surgery: a cadaver study. International Journal of Implant Dentistry. 2021 Jun 14;7(1):54. DOI: 10.1186/s40729-021-00335-w. PMID: 34121148; PMCID: PMC8200332.
Wang, C. I., Cho, S., Ivey, A., Reddy, L. V. & Sinada, N. (2021). Combined bone- and mucosa-supported 3D-printed guide for sinus slot preparation and prosthetically driven zygomatic implant placement. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2021.02.024
Xiangliang, X., Zhao, S., Liu, H., Sun, Z., Wang, J. & Zhang, W. (2017). An Anatomical Study of Maxillary-Zygomatic Complex Using Three-Dimensional Computerized Tomography-Based Zygomatic Implantation. BioMed Research International. Volume 2017, Article ID 8027307, 8 pages. https://doi.org/10.1155/2017/8027307.
Wu, Y., Tao, B., Lan, K., Shen, Y., Huang, W. & Wang, F. (2022). Reliability and accuracy of dynamic navigation for zygomatic implant placement. Clinical Oral Implants Research. 2022; 33, 362–376. DOI: 10.1111/clr.13897.
Xing Gao, B., Iglesias-Velázquez, O., Tresguerres, F. G. F., Cortes, A. R. G., Tresguerres, I. F., Aranegui, R. O., López-Pintor, R. M., López-Quiles, J. & Torres, J. (2021). Accuracy of digital planning in zygomatic implants. International Journal of Implant Dentistry. 2021 Jul 22;7(1):65. DOI: 10.1186/s40729-021-00350-x. PMID: 34291352; PMCID: PMC8295422.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Cibele Maria Barbosa Almeida Melo; Laila Cibelle Bezerra Alves; Erik Neiva Ribeiro de Carvalho Reis ; Elesbão Ferreira Viana Júnior; Sérgio Antônio Pereira Freitas; Giselle Maria Ferreira Lima Verde
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
