The importance of maxillary sinus lifting for the installation of dental implants
DOI:
https://doi.org/10.33448/rsd-v9i10.8825Keywords:
Maxillary sinus; Osseointegration; Dental implantation.Abstract
In the face of maxillary atrophy, the sinus floor tends to exhibit only a thin cortical bone wall, imposing limitations on the placement of dental implants. The purpose of this literature review was to evaluate the scientific performance on the importance of lifting the maxillary sinus for the installation of dental implants. A literature review was conducted using the PubMed/Medline, Scielo and Science direct databases. Articles published between 2014 and 2020 were selected based on the following inclusion criteria: Availability of the full text, publication in English and clarity on the methodological details used. Studies have shown that the anatomy of the maxillary sinus must be investigated before planning the implants in the posterior region of the maxilla, in order to diagnose the presence of sinus pathologies, the presence of septa and pneumatization. It is important to note that the lifting of the maxillary sinus is a procedure that has good results, showing few complications in the postoperative period. In addition, cone beam computed tomography should be the imaging exam of first choice when this procedure is indicated for the installation of dental implants.
References
Amine, K., Slaoui, S., Kanice, F., & Kissa, J. (2020). Evaluation of maxillary sinus anatomical variations and lesions: A retrospective analysis using cone beam computed tomography. Journal Of Stomatology, Oral And Maxillofacial Surgery. https://doi.org/10.1016/j.jormas.2019.12.021
Anbiaee, N., Khodabakhsh, R., & Bagherpour, A. (2019). Relationship between Anatomical Variations of Sinonasal Area and Maxillary Sinus Pneumatization. Iranian journal of otorhinolaryngology, 31(105), 229–234.
Barbosa, C., Silva, M., Araujo, J., & Raitz, R. (2019). Prevalência de sinusopatias maxilares por meio de tomografia computadorizada de feixe cônico. Clinical And Laboratorial Research In Dentistry. https://doi.org/10.11606/issn.2357-8041.clrd.2019.155150
Barbosa Junior, S., Maroli, A., Rocha Pereira, G., & Bacchi, A. (2019). Collagen vs expanded polytetrafluorethylene membranes during guided-bone regeneration simultaneous with implant placement – a systematic review. Journal Of Oral Investigations, 8(2), 59. https://doi.org/10.18256/2238-510x.2019.v8i2.3375
Bataineh, K., & Al Janaideh, M. (2019). Effect of different biocompatible implant materials on the mechanical stability of dental implants under excessive oblique load. Clinical Implant Dentistry And Related Research, 21(6), 1206-1217. https://doi.org/10.1111/cid.12858
Bustillo, D., & Zuloaga, M. (2017). Elevación de piso de seno maxilar con técnica de ventana lateral y colocación simultánea de implantes: reporte de un caso. Revista Clínica De Periodoncia, Implantología Y Rehabilitación Oral, 10(3), 159-162. https://doi.org/10.4067/s0719-01072017000300159
Danesh-Sani, S., Loomer, P., & Wallace, S. (2016). A comprehensive clinical review of maxillary sinus floor elevation: anatomy, techniques, biomaterials and complications. British Journal Of Oral And Maxillofacial Surgery, 54(7), 724-730. https://doi.org/10.1016/j.bjoms.2016.05.008
de Gabory, L., Catherine, J., Molinier-Blossier, S., Lacan, A., Castillo, L., & Russe, P. et al. (2020). French Otorhinolaryngology Society (SFORL) good practice guidelines for dental implant surgery close to the maxillary sinus. European Annals Of Otorhinolaryngology, Head And Neck Diseases, 137(1), 53-58. https://doi.org/10.1016/j.anorl.2019.11.002
Dragan, E., Odri, G., Melian, G., Haba, D., & Olszewski, R. (2017). Three-Dimensional Evaluation of Maxillary Sinus Septa for Implant Placement. Medical Science Monitor, 23, 1394-1400. https://doi.org/10.12659/msm.900327
Duan, D., Fu, J., Qi, W., Du, Y., Pan, J., & Wang, H. (2017). Graft-Free Maxillary Sinus Floor Elevation: A Systematic Review and Meta-Analysis. Journal Of Periodontology, 88(6), 550-564. https://doi.org/10.1902/jop.2017.160665
El-Anwar, M., El-Mofty, M., Awad, A., El-Sheikh, S., & El-Zawahry, M. (2014). The effect of using different crown and implant materials on bone stress distribution. Egyptian Journal Of Oral & Maxillofacial Surgery, 5(2), 58-64. https://doi.org/10.1097/01.omx.0000444266.10130.4c
Giacomini, G., Pavan, A., Altemani, J., Duarte, S., Fortaleza, C., Miranda, J., & de Pina, D. (2018). Computed tomography-based volumetric tool for standardized measurement of the maxillary sinus. PLOS ONE, 13(1), e0190770. https://doi.org/10.1371/journal.pone.0190770
Guerra, Orlando, Anaya Mauri, Yamila, Hernández Pedroso, Luis, & Felipe Torres, Sonia. (2018). Caracterización anatomoclínica de elevaciones sinusales en pacientes implantológicos. Revista Habanera de Ciencias Médicas, 17(1), 80-90. Recuperado en 26 de septiembre de 2020, de http://scielo.sld.cu/scielo.php?script=sci_arttext&pid=S1729519X2018000100010&lng=es&tlng=es.
Jacobs, R., Salmon, B., Codari, M., Hassan, B., & Bornstein, M. (2018). Cone beam computed tomography in implant dentistry: recommendations for clinical use. BMC Oral Health, 18(1). https://doi.org/10.1186/s12903-018-0523-5
Khaled, H., Atef, M., & Hakam, M. (2019). Maxillary sinus floor elevation using hydroxyapatite nano particles vs tenting technique with simultaneous implant placement: A randomized clinical trial. Clinical Implant Dentistry And Related Research, 21(6), 1241-1252. https://doi.org/10.1111/cid.12859
Kwon, J., Hwang, J., Kim, Y., Shin, S., Cho, B., & Lee, J. (2019). Automatic three‐dimensional analysis of bone volume and quality change after maxillary sinus augmentation. Clinical Implant Dentistry And Related Research, 21(6), 1148-1155. https://doi.org/10.1111/cid.12853
La Monaca, G., Iezzi, G., Cristalli, M., Pranno, N., Sfasciotti, G., & Vozza, I. (2018). Comparative Histological and Histomorphometric Results of Six Biomaterials Used in Two-Stage Maxillary Sinus Augmentation Model after 6-Month Healing. Biomed Research International, 2018, 1-11. https://doi.org/10.1155/2018/9430989
Leighton, Y., Weber, B., Rosas, E., Pinto, N., & Borie, E. (2019). Autologous Fibrin Glue With Collagen Carrier During Maxillary Sinus Lift Procedure. Journal Of Craniofacial Surgery, 30(3), 843-845. https://doi.org/10.1097/scs.0000000000005203
Matern, J., Keller, P., Carvalho, J., Dillenseger, J., Veillon, F., & Bridonneau, T. (2015). Radiological sinus lift: a new minimally invasive CT-guided procedure for maxillary sinus floor elevation in implant dentistry. Clinical Oral Implants Research, 27(3), 341-347. https://doi.org/10.1111/clr.12549
Mazzone, N., Mici, E., Calvo, A., Runci, M., Crimi, S., Lauritano, F., & Belli, E. (2018). Preliminary Results of Bone Regeneration in Oromaxillomandibular Surgery Using Synthetic Granular Graft. Biomed Research International, 2018, 1-5. https://doi.org/10.1155/2018/8503427
Menezes, J., Pereira, R., Bonardi, J., Griza, G., Okamoto, R., & Hochuli-Vieira, E. (2018). Bioactive glass added to autogenous bone graft in maxillary sinus augmentation: a prospective histomorphometric, immunohistochemical, and bone graft resorption assessment. Journal Of Applied Oral Science, 26(0). https://doi.org/10.1590/1678-7757-2017-0296
Molon, R., Paula, W., Spin-Neto, R., Verzola, M., Tosoni, G., & Lia, R. et al. (2015). Correlation of Fractal Dimension with Histomorphometry in Maxillary Sinus Lifting Using Autogenous Bone Graft. Brazilian Dental Journal, 26(1), 11-18. https://doi.org/10.1590/0103-6440201300290
Pacenko, M., Navarro, R., Freire Fernandes, T., De Castro Ferreira Conti, A., Domingues, F., & Pedron Oltramari-Navarro, P. (2017). Avaliação do Seio Maxilar: Radiografia Panorâmica Versus Tomografia Computadorizada de Feixe Cônico. Journal Of Health Sciences, 19(3), 205. https://doi.org/10.17921/2447-8938.2017v19n3p205-208
Pauwels, R., Jacobs, R., Singer, S., & Mupparapu, M. (2015). CBCT-based bone quality assessment: are Hounsfield units applicable?. Dentomaxillofacial Radiology, 44(1), 20140238. https://doi.org/10.1259/dmfr.20140238
Pereira, A., Shitsuka, D., Parreira, F., & Shitsuka, R. (2018). METODOLOGIA DA PESQUISA CIENTÍFICA [Ebook] (1st ed.). UNIVERSIDADE FEDERAL DE SANTA MARIA. Retrieved 4 October 2020, from.
Perez, A., Mamani, M., & Capelozza, A. (2017). Avaliação da largura do seio maxilar em indivíduos edêntulos totais e parciais. Revista Portuguesa De Estomatologia, Medicina Dentária E Cirurgia Maxilofacial, 59(2). https://doi.org/10.24873/j.rpemd.2018.09.234
Rahmitasari, F., Ishida, Y., Kurahashi, K., Matsuda, T., Watanabe, M., & Ichikawa, T. (2017). PEEK with Reinforced Materials and Modifications for Dental Implant Applications. Dentistry Journal, 5(4), 35. https://doi.org/10.3390/dj5040035
Santos Malheiros, Adriana, & De Jesus Tavarez, Rudys Rodolfo. (2016). Regeneração óssea na região posterior da maxila para instalação de implantes dentários. Revista Cubana de Estomatología, 53(4), 245-255. Recuperado en 26 de septiembre de 2020, de http://scielo.sld.cu/scielo.php?script=sci_arttext&pid=S0034-75072016000400007&lng=es&tlng=pt.
Scharager-Lewin, D., Arraño-Scharager, D., & Biotti-Picand, J. (2016). Biomateriales en levantamiento de seno maxilar para implantes dentales. Revista Clínica De Periodoncia, Implantología Y Rehabilitación Oral. https://doi.org/10.1016/j.piro.2016.06.002
Schriber, M., Bornstein, M., & Suter, V. (2018). Is the pneumatisation of the maxillary sinus following tooth loss a reality? A retrospective analysis using cone beam computed tomography and a customised software program. Clinical Oral Investigations, 23(3), 1349-1358. https://doi.org/10.1007/s00784-018-2552-5
Shaul Hameed, K., Abd Elaleem, E., & Alasmari, D. (2020). Radiographic evaluation of the anatomical relationship of maxillary sinus floor with maxillary posterior teeth apices in the population of Al-Qassim, Saudi Arabia, using cone beam computed tomography. The Saudi Dental Journal. https://doi.org/10.1016/j.sdentj.2020.03.008
Souza, C., Loures, A., Lopes, D., & Devito, K. (2019). Analysis of maxillary sinus septa by cone-beam computed tomography. Revista De Odontologia Da UNESP, 48. https://doi.org/10.1590/1807-2577.03419
Trinh, H., Dam, V., Le, B., Pittayapat, P., & Thunyakitpisal, P. (2019). Indirect Sinus Augmentation With and Without the Addition of a Biomaterial. Implant Dentistry, 28(6), 571-577. https://doi.org/10.1097/id.0000000000000941
Velasco-Torres, M., Padial-Molina, M., Avila-Ortiz, G., García-Delgado, R., OʼValle, F., Catena, A., & Galindo-Moreno, P. (2017). Maxillary Sinus Dimensions Decrease as Age and Tooth Loss Increase. Implant Dentistry, 26(2), 288-295. https://doi.org/10.1097/id.0000000000000551
Zhao, X., Gao, W., & Liu, F. (2018). Clinical evaluation of modified transalveolar sinus floor elevation and osteotome sinus floor elevation in posterior maxillae: study protocol for a randomized controlled trial. Trials, 19(1). https://doi.org/10.1186/s13063-018-2879-x
Zheng, X., Teng, M., Zhou, F., Ye, J., Li, G., & Mo, A. (2015). Influence of Maxillary Sinus Width on Transcrestal Sinus Augmentation Outcomes: Radiographic Evaluation Based on Cone Beam CT. Clinical Implant Dentistry And Related Research, 18(2), 292-300. https://doi.org/10.1111/cid.12298
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Wladimir Fernandes Filho; Daniel Felipe Fernandes Paiva; Juliana Campos Pinheiro; Gabriel Gomes da Silva; José Sérgio Maia Neto; Saulo Hilton Batista Botelho
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
