Influence of increment thickness on microhardness and bond strength in composite resins
DOI:
https://doi.org/10.33448/rsd-v10i9.17974Keywords:
Composite resins; Hardness tests; Polymerization.Abstract
The aim of this study was to evaluate the Knoop microhardness and the microtensile bond strength of a second-generation of bulk-fill (BF) and a nanohybrid composite resins (NH) in different thicknesses of increments. For this, ninety disks of composite resin were made for Knoop microhardness, being divided into six groups (n = 15). The Knoop microhardness obtained in each millimeter of the internal face. For microtensile bond strength, ninety restored in third molars were used, divided into six groups (n = 15). For Knoop microhardness, the Wilcoxon and Friedman test was used. For the microtensile bond strength were used the Two-way Anova test and Tukey's post-test (p <0.05). The NH resin showed higher Knoop micro hardness than BF and it was observed that hardness value decreases as increases the thickness of the resin. There was no significant difference in microtensile bond strength comparing NH and BF. However, there was a significant difference between G2 and G4 for the NH groups, with the highest and lowest bond strength values, respectively. Thus, the new generation of the bulk-fill composite resin provided lower microhardness values as the thickness of the increments increases in comparison with the nanohybrid composite resin. The microtensile bond strength does not appear to have been influenced by the type of resin, or the thickness of the increment.
References
Aggarwal, N., Jain, A., Gupta, H., Abrol, A., Singh, C., & Rapgay, T. (2019). The comparative evaluation of depth of cure of bulk-fill composites - An in vitro study. J Conserv Dent, 22(4), 371-375. doi:10.4103/jcd.Jcd_453_18
Alkhudhairy, F. I. (2017). The effect of curing intensity on mechanical properties of different bulk-fill composite resins. Clin Cosmet Investig Dent, 9, 1-6. doi:10.2147/ccide.S130085
Alzraikat, H., Burrow, M. F., Maghaireh, G. A., & Taha, N. A. (2018). Nanofilled Resin Composite Properties and Clinical Performance: A Review. Oper Dent, 43(4), E173-e190. doi:10.2341/17-208-t
Behery, H., El-Mowafy, O., El-Badrawy, W., Saleh, B., & Nabih, S. (2016). Cuspal Deflection of Premolars Restored with Bulk-Fill Composite Resins. J Esthet Restor Dent, 28(2), 122-130. doi:10.1111/jerd.12188
Briso, A. L., Gonçalves, R. S., Costa, F. B., Gallinari Mde, O., Cintra, L. T., & Santos, P. H. (2015). Demineralization and hydrogen peroxide penetration in teeth with incipient lesions. Braz Dent J, 26(2), 135-140. doi:10.1590/0103-6440201300225
Chesterman, J., Jowett, A., Gallacher, A., & Nixon, P. (2017). Bulk-fill resin-based composite restorative materials: a review. Br Dent J, 222(5), 337-344. doi:10.1038/sj.bdj.2017.214
de Araújo, C. S., Schein, M. T., Zanchi, C. H., Rodrigues, S. A., Jr., & Demarco, F. F. (2008). Composite resin microhardness: the influence of light curing method, composite shade, and depth of cure. J Contemp Dent Pract, 9(4), 43-50.
Fronza, B. M., Ayres, A., Pacheco, R. R., Rueggeberg, F. A., Dias, C., & Giannini, M. (2017). Characterization of Inorganic Filler Content, Mechanical Properties, and Light Transmission of Bulk-fill Resin Composites. Oper Dent, 42(4), 445-455. doi:10.2341/16-024-l
Gajewski, V. E., Pfeifer, C. S., Fróes-Salgado, N. R., Boaro, L. C., & Braga, R. R. (2012). Monomers used in resin composites: degree of conversion, mechanical properties and water sorption/solubility. Braz Dent J, 23(5), 508-514. doi:10.1590/s0103-64402012000500007
Garcia, D., Yaman, P., Dennison, J., & Neiva, G. (2014). Polymerization shrinkage and depth of cure of bulk fill flowable composite resins. Oper Dent, 39(4), 441-448. doi:10.2341/12-484-l
Gonçalves, F., Campos, L. M. P., Rodrigues-Júnior, E. C., Costa, F. V., Marques, P. A., Francci, C. E., & Boaro, L. C. C. (2018). A comparative study of bulk-fill composites: degree of conversion, post-gel shrinkage and cytotoxicity. Braz Oral Res, 32, e17. doi:10.1590/1807-3107bor-2018.vol32.0017
Kim, R. J., Kim, Y. J., Choi, N. S., & Lee, I. B. (2015). Polymerization shrinkage, modulus, and shrinkage stress related to tooth-restoration interfacial debonding in bulk-fill composites. J Dent, 43(4), 430-439. doi:10.1016/j.jdent.2015.02.002
Kumagai, R. Y., Zeidan, L. C., Rodrigues, J. A., Reis, A. F., & Roulet, J. F. (2015). Bond Strength of a Flowable Bulk-fill Resin Composite in Class II MOD Cavities. J Adhes Dent, 17(5), 427-432. doi:10.3290/j.jad.a35012
Lima, R. B. W., Troconis, C. C. M., Moreno, M. B. P., Murillo-Gómez, F., & De Goes, M. F. (2018). Depth of cure of bulk fill resin composites: A systematic review. J Esthet Restor Dent, 30(6), 492-501. doi:10.1111/jerd.12394
Mandava, J., Vegesna, D. P., Ravi, R., Boddeda, M. R., Uppalapati, L. V., & Ghazanfaruddin, M. D. (2017). Microtensile bond strength of bulk-fill restorative composites to dentin. J Clin Exp Dent, 9(8), e1023-e1028. doi:10.4317/jced.53965
Piemjai, M., Chantarawej, P., & Nakabayashi, N. (2020). Evaluation of Caries-Free Restorations Bonded with Various Adhesive Systems: In Vitro Study. Int J Dent, 2020, 5859835. doi:10.1155/2020/5859835
Price, R. B., Dérand, T., Sedarous, M., Andreou, P., & Loney, R. W. (2000). Effect of distance on the power density from two light guides. J Esthet Dent, 12(6), 320-327. doi:10.1111/j.1708-8240.2000.tb00241.x
Sahadi, B. O., Price, R. B., André, C. B., Sebold, M., Bermejo, G. N., Palma-Dibb, R. G., & Giannini, M. (2018). Multiple-peak and single-peak dental curing lights comparison on the wear resistance of bulk-fill composites. Braz Oral Res, 32, e122. doi:10.1590/1807-3107bor-2018.vol32.0122
Tauböck, T. T., Tarle, Z., Marovic, D., & Attin, T. (2015). Pre-heating of high-viscosity bulk-fill resin composites: effects on shrinkage force and monomer conversion. J Dent, 43(11), 1358-1364. doi:10.1016/j.jdent.2015.07.014
Warangkulkasemkit, S., & Pumpaluk, P. (2019). Comparison of physical properties of three commercial composite core build-up materials. Dent Mater J, 38(2), 177-181. doi:10.4012/dmj.2018-038
Yap, A. U., Eweis, A. H., & Yahya, N. A. (2020). Dynamic Viscoelastic Characterization of Bulk-fill Resin-based Composites and Their Conventional Counterparts. Oper Dent, 45(2), 173-182. doi:10.2341/19-005-l
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Isis Almela Endo Hoshino; Mariana de Oliveira Bachega; Paulo Henrique dos Santos; André Luiz Briso; Rodolfo Bruniera Anchieta
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
