Protocol of the use of orthodontic wires in self-ligating appliances

Authors

DOI:

https://doi.org/10.33448/rsd-v10i4.14064

Keywords:

Orthodontics; Orthodontic appliance design; Orthodontic fixed appliances.

Abstract

Due to the wide variety of manufacturers of self-ligating orthodontic appliances, doubts regarding the protocol of use and the sequence of the archwires in these appliances may arise. In this way, the knowledge of the mechanical properties of orthodontic wires facilitates the most appropriate choice for each phase of treatments. The technological evolution of the manufacture of the wires and the development of new orthodontic techniques lead to a search for a better quality of the alloys, in order to make them biologically more effective with regard to the teeth and supporting tissues. This work presents the wire protocol for each treatment phase; the wire protocol recommended by different manufacturers and the Bioforce archwire protocol used at the FAIPE clinic.

References

Albuquerque, C. B. et al. (2017) Deflection and Flexural Strength Effects on the Roughness of Aesthetic-Coated Orthodontic Wires. Brazilian Dental Journal, 28(1), 40-45.

Bradley, T. G. et al. (2013) An investigation into the mechanical and aesthetic properties of new generation coated nickel-titanium wires in the as-received state and after clinical use. European Journal of Orthodontics, 36(3), 290-296.

Braga, L. C. C. et al. (2011) Friction force on brackets generated by stainless steel wire and superelastic wires with and without IonGuard. Dental Press Journal of Orthodontics, 16(4), 41.e1-41. e6.

Da Motta, A. T. S. et al. (2003) Histórico de fios utilizados em ortodontia. Ortodontia Gaúcha, 7(1), 65-70.

Gravina, M. A. et al. (2004) Fios ortodônticos: propriedades mecânicas relevantes e aplicação clínica. Revista Dental Press de Ortodontia e Ortopedia Facial, 9, 113-128.

Gurgel, J. A., Ramor, A. L. & Kerr, S. D. (2001) Fios Ortodônticos, Revista Dental Press de Ortodontia e Ortopedia Facial, 6(4), 103-114.

Lijima, M. et al. (2011) Effect of coating on properties of esthetic orthodontic nickel-titanium wires. Angle Orthodontist, 82(2), 319-325.

Macena, M. C. B. et al. (2015) Fios ortodônticos, propriedades microestruturais e suas aplicações clínicas: visão geral. Revista. Saúde & Ciência Online, 4(2), 90-108.

Mandall, N. A. et al. (2006) Which orthodontic archwire sequence? A randomized clinical trial. European Journal of Orthodontics., 28(6), 561-566.

Pereira, A. S., Shitsuka, D. M., Parreira, F. J., & Shitsuka, R. (2018). Metodologia da pesquisa científica. https://repositorio.ufsm.br/bitstream/handle/1/15824/

Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1

Philip, N. et al. (2016) Newer Orthodontic Archwires: Imparting Efficacy to Esthetics. International Journal of Oral Health Dentistry, 2(2), 102-105.

Quintão, C. C. A. & Brunharo, I. H. V. P. (2009) Fios ortodônticos: conhecer para otimizar a aplicação clínica. Revista Dental Press de Ortodontia e Ortopedia Facial, 14(6), 144-157.

Ranjan, N. et al. (2017) Recent advancement in orthodontic wires: a review. Journal of the Dental College Azamgarh, 3(1), 50-62.

Sathler, R. et al. (2011) Desmistificando os braquetes autoligáveis. Dental Press Journal of Orthodontics, 16(2), e1-e8.

Schemann-Miguel, F. et al. (2012) Análise comparativa da relação carga/deflexão de fios retangulares de NiTi convencionais e termoativados. Dental Press Journal of Orthodontics, 17(3), 35.

Spini, T. S. et al. (2012) Avaliação do intervalo de transição térmica das ligas de níquel-titânio termoativadas. Ortodontia, 45(5), 575-580.

Ursi, W. & Almeida, G. (2010) Ortodontia com Braquetes Autoligáveis. Almeida, M. R. Ortodontia Clínica e Biomecânica. Maringá, Ed. Dental Press, 608p., Cap. 15.

Vilella, O. V. (2007) O desenvolvimento da ortodontia no Brasil e no mundo. Dental Press Journal of Orthodontics, 12(6), 131-156.

Zanelato, R. C. T. (2016) Tratamento ortodôntico com aparelho autoligado passivo–Smart Clip™. Caso clínico [Online]. Disponível em: https://pt.scribd.com/document/480362833/SO78-4as-p48-54

Downloads

Published

18/04/2021

How to Cite

HAAS, L. C. da S. .; ALESSIO JUNIOR, L. E. .; CREPALDI, M. G.; CURI, V. .; SUÁREZ, J. R. G. .; MOREIRA , K. M. S. .; SILVA, P. V. da .; CREPALDI, M. V. . Protocol of the use of orthodontic wires in self-ligating appliances. Research, Society and Development, [S. l.], v. 10, n. 4, p. e47610414064, 2021. DOI: 10.33448/rsd-v10i4.14064. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/14064. Acesso em: 19 apr. 2024.

Issue

Vol. 10 No. 4

Section

Health Sciences

License

Copyright (c) 2021 Laylla Carneiro da Silva Haas; Luiz Eduardo Alessio Junior; Melissa Guimarães Crepaldi; Viviane Curi; Jaime Rodolfo Gamarra Suárez; Kelly Maria Silva Moreira ; Priscila Vieira da Silva; Marcus Vinicius Crepaldi

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.